Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revision | |||
| resources:eval:user-guides:ev-cog-ad3029lz:help_support [21 Dec 2017 09:33] – Pranit Jadhav | resources:eval:user-guides:ev-cog-ad3029lz:help_support [03 Jan 2021 21:55] (current) – fix links Robin Getz | ||
|---|---|---|---|
| Line 17: | Line 17: | ||
| * The first thing to try in this case, is to [[resources: | * The first thing to try in this case, is to [[resources: | ||
| * If drag and drop is not working, it may be necessary to erase the flash. To do so: | * If drag and drop is not working, it may be necessary to erase the flash. To do so: | ||
| - | - Download and install the CrossCore Serial Flash Programmer from here: [[http:// | + | - Download and install the CrossCore Serial Flash Programmer from here: [[adi>en/ |
| - Make sure that the USB is connected and on UART header (P8) 1 & 2 and 7 & 8 are shorted. | - Make sure that the USB is connected and on UART header (P8) 1 & 2 and 7 & 8 are shorted. | ||
| - Power cycle the EV-COG-AD3029LZ board while holding down the boot switch. | - Power cycle the EV-COG-AD3029LZ board while holding down the boot switch. | ||
resources/eval/user-guides/ev-cog-ad3029lz/help_support.txt · Last modified: 03 Jan 2021 21:55 by Robin Getz