Wiki

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
resources:eval:user-guides:adrv9009-zu11eg:quick-start-guide [07 Aug 2020 15:52]
Michael Hennerich [ADRV9009-ZU11EG Specific Boot Files]
resources:eval:user-guides:adrv9009-zu11eg:quick-start-guide [28 Oct 2022 12:42] (current)
Andrei Dragomir Update
Line 6: Line 6:
  
   * [[adi>​ADRV2CRR-FMC]]   * [[adi>​ADRV2CRR-FMC]]
 +
 +If you want to use it with FMCOMMS8, please refer to [[:​resources:​eval:​user-guides:​ad-fmcomms8-ebz:​quick-start-guide|FMCOMMS8 Quick Start Guide]]
  
 Instructions on how to build the ZynqMP / MPSoC Linux kernel and devicetrees from source can be found here: Instructions on how to build the ZynqMP / MPSoC Linux kernel and devicetrees from source can be found here:
Line 15: Line 17:
  
  
-  * SD Card 8GB imaged using the instructions here: [[resources:​tools-software:​linux-software:​zynq_images|Zynq & Altera SoC Quick Start Guide]]+  * SD Card 16GB imaged using the instructions here: [[:resources:​tools-software:​linux-software:​kuiper-linux|Zynq & Altera SoC Quick Start Guide]]
   * A UART terminal (Putty/Tera Term/​Minicom,​ etc.), Baud rate 115200 (8N1).   * A UART terminal (Putty/Tera Term/​Minicom,​ etc.), Baud rate 115200 (8N1).
  
 +Please use the [[:​resources:​tools-software:​linux-software:​zynq_images | Please use the Image 28 July 2021 release candidate (2019_R2) or later]]
  
-==== Pre-release SD Card Creation ==== +<hidden Older Bootfiles (Click ​to expand)>
- +
-The project will be release as part of 2019_r1 release.Before then, the SD image for 2018_r2 can be used.  +
- +
-==== Writing the SD Card ==== +
- +
-Details on how to write the SD card can be found here: [[resources:​tools-software:​linux-software:​zynq_images|Zynq & Altera SoC Quick Start Guide]] including the 2018_R2 image. +
- +
-==== ADRV9009-ZU11EG Specific Boot Files ==== +
- +
-After writing the image, on the boot partition ADRV9009-ZU11EG specific files can be added from  +
- +
   * [[http://​swdownloads.analog.com/​cse/​share/​ADRV9009-ZU11EG-14-06-2019.zip|ADRV9009-ZU11EG-14-06-2019.zip HW Rev.A]]   * [[http://​swdownloads.analog.com/​cse/​share/​ADRV9009-ZU11EG-14-06-2019.zip|ADRV9009-ZU11EG-14-06-2019.zip HW Rev.A]]
   * [[http://​swdownloads.analog.com/​cse/​share/​ADRV9009-ZU11EG-RevB-10-09-2019.zip|ADRV9009-ZU11EG-RevB-10-09-2019.zip HW Rev.B]]   * [[http://​swdownloads.analog.com/​cse/​share/​ADRV9009-ZU11EG-RevB-10-09-2019.zip|ADRV9009-ZU11EG-RevB-10-09-2019.zip HW Rev.B]]
   * [[http://​swdownloads.analog.com/​cse/​share/​ADRV9009-ZU11EG-RevB-07-08-2020.zip|ADRV9009-ZU11EG-RevB-07-08-2020.zip HW Rev.B]]   * [[http://​swdownloads.analog.com/​cse/​share/​ADRV9009-ZU11EG-RevB-07-08-2020.zip|ADRV9009-ZU11EG-RevB-07-08-2020.zip HW Rev.B]]
- +</hidden>
- +
-Copy:  +
-  - BOOT.BIN +
-  - Image +
-  - system.dtb +
-  - uEnv.txt +
- +
--To the root directory of the SD-Card FAT32 BOOT partition.+
  
 ===== Required Hardware ===== ===== Required Hardware =====
Line 84: Line 67:
 <​code>​ <​code>​
 Xilinx Zynq MP First Stage Boot Loader ​ Xilinx Zynq MP First Stage Boot Loader ​
-Release ​2018.  ​Jun 14 2019  ​-  ​10:06:14+Release ​2021.  ​Aug  3 2022  ​-  ​11:00:01
  
  
-U-Boot 2018.01-21435-g099c929 ​(May 28 2019 08:42:11 +0000) Analog Devices Inc. ADR9009-ZU11EG+U-Boot 2018.01-21439-gd244ce5 ​(Mar 28 2021 13:30:43 +0100) Analog Devices Inc. ADR9009-ZU11EG, Build: jenkins-development-build_uboot-3
  
 I2C:   ready I2C:   ready
Line 104: Line 87:
 I2C EEPROM MAC address read failed I2C EEPROM MAC address read failed
  
-Warning: ethernet@ff0b0000 (eth1) using random MAC address - da:3c:6d:34:48:50+Warning: ethernet@ff0b0000 (eth1) using random MAC address - c6:bd:2a:d9:e2:01
 eth1: ethernet@ff0b0000ZYNQ GEM: ff0e0000, phyaddr 0, interface rgmii-id eth1: ethernet@ff0b0000ZYNQ GEM: ff0e0000, phyaddr 0, interface rgmii-id
 I2C EEPROM MAC address read failed I2C EEPROM MAC address read failed
  
-Warning: ethernet@ff0e0000 (eth0) using random MAC address - 1e:d5:da:08:37:fe+Warning: ethernet@ff0e0000 (eth0) using random MAC address - aa:cd:e8:38:80:de
 , eth0: ethernet@ff0e0000 , eth0: ethernet@ff0e0000
 Hit any key to stop autoboot: ​ 0  Hit any key to stop autoboot: ​ 0 
Line 114: Line 97:
 mmc0 is current device mmc0 is current device
 Device: sdhci@ff170000 Device: sdhci@ff170000
-Manufacturer ID: 3 +Manufacturer ID: 41 
-OEM: 5344 +OEM: 3432 
-Name: SU08G +Name: SD16G 
 Tran Speed: 50000000 Tran Speed: 50000000
 Rd Block Len: 512 Rd Block Len: 512
 SD version 3.0 SD version 3.0
 High Capacity: Yes High Capacity: Yes
-Capacity: ​7.GiB+Capacity: ​14.GiB
 Bus Width: 4-bit Bus Width: 4-bit
 Erase Group Size: 512 Bytes Erase Group Size: 512 Bytes
 reading uEnv.txt reading uEnv.txt
-376 bytes read in 16 ms (22.KiB/s)+407 bytes read in 21 ms (18.KiB/s)
 Loaded environment from uEnv.txt Loaded environment from uEnv.txt
 Importing environment from SD ... Importing environment from SD ...
Line 131: Line 114:
 Copying Linux from SD to RAM... Copying Linux from SD to RAM...
 ** No boot file defined ** ** No boot file defined **
 +SF: Detected n25q512a with page size 512 Bytes, erase size 128 KiB, total 128 MiB
 +device 0 offset 0x2000000, size 0x20000
 +SF: 131072 bytes @ 0x2000000 Read: OK
 reading system.dtb reading system.dtb
-62255 bytes read in 19 ms (3.MiB/s)+79158 bytes read in 32 ms (2.MiB/s)
 reading Image reading Image
-16228864 ​bytes read in 1045 ms (14.MiB/s)+32514560 ​bytes read in 2084 ms (14.MiB/s)
 ## Flattened Device Tree blob at 04000000 ## Flattened Device Tree blob at 04000000
    ​Booting using the fdt blob at 0x4000000    ​Booting using the fdt blob at 0x4000000
-   ​Loading Device Tree to 000000000ffed000, end 000000000ffff32e ​... OK+   ​Loading Device Tree to 000000000ffe9000, end 000000000ffff535 ​... OK
  
 Starting kernel ... Starting kernel ...
  
-[    0.000000] Booting Linux on physical CPU 0x0 +[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] 
-[    0.000000] Linux version ​4.14.0-12222-g6598c88 ​(michael@mhenneri-D06) (gcc version 6.2.1 20161114 ​(Linaro ​GCC Snapshot 6.2-2016.11)) #2783 SMP Fri Jun 14 15:35:26 CEST 2019 +[    0.000000] Linux version ​5.10.0-98248-g1bbe32fa5182 ​(jenkins@romlxbuild1.adlk.analog.com) (aarch64-xilinx-linux-gcc.real (GCC) 10.2.0, 2 
-[    ​0.000000] Boot CPU: AArch64 Processor [410fd034] +[    0.000000] Machine model: Analog Devices ADRV9009-ZU11EG ​Rev.B
-[    0.000000] Machine model: Analog Devices ADRV9009-ZU11EG+
 [    0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '​115200n8'​) [    0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '​115200n8'​)
-[    0.000000] bootconsole [cdns0] enabled +[    0.000000] ​printk: ​bootconsole [cdns0] enabled
-[    0.000000] efi: Getting EFI parameters from FDT:+
 [    0.000000] efi: UEFI not found. [    0.000000] efi: UEFI not found.
 [    0.000000] cma: Reserved 256 MiB at 0x0000000070000000 [    0.000000] cma: Reserved 256 MiB at 0x0000000070000000
 +[    0.000000] Zone ranges:
 +[    0.000000] ​  ​DMA ​     [mem 0x0000000000000000-0x000000003fffffff]
 +[    0.000000] ​  ​DMA32 ​   [mem 0x0000000040000000-0x00000000ffffffff]
 +[    0.000000] ​  ​Normal ​  [mem 0x0000000100000000-0x000000087fffffff]
 +[    0.000000] Movable zone start for each node
 +[    0.000000] Early memory node ranges
 +[    0.000000] ​  ​node ​  0: [mem 0x0000000000000000-0x000000007fffffff]
 +[    0.000000] ​  ​node ​  0: [mem 0x0000000800000000-0x000000087fffffff]
 +[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000087fffffff]
 [    0.000000] psci: probing for conduit method from DT. [    0.000000] psci: probing for conduit method from DT.
 [    0.000000] psci: PSCIv1.1 detected in firmware. [    0.000000] psci: PSCIv1.1 detected in firmware.
 [    0.000000] psci: Using standard PSCI v0.2 function IDs [    0.000000] psci: Using standard PSCI v0.2 function IDs
 [    0.000000] psci: MIGRATE_INFO_TYPE not supported. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
-[    0.000000] ​randomfast init done +[    0.000000] ​psciSMC Calling Convention v1.2 
-[    0.000000] percpu: Embedded ​21 pages/​cpu ​@ffffffc87ff56000 s45080 ​r8192 d32744 u86016+[    0.000000] percpu: Embedded ​22 pages/​cpu ​s49496 ​r8192 d32424 u90112
 [    0.000000] Detected VIPT I-cache on CPU0 [    0.000000] Detected VIPT I-cache on CPU0
-[    0.000000] CPU features: ​enabling workaround for ARM erratum 845719+[    0.000000] CPU features: ​detected: ​ARM erratum 845719
 [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1034240 [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1034240
-[    0.000000] Kernel command line: console=ttyPS0,​115200 root=/​dev/​mmcblk0p2 rw earlycon rootfstype=ext4 rootwait ​root=/​dev/​mmcblk0p2 rw rootwait +[    0.000000] Kernel command line: console=ttyPS0,​115200 root=/​dev/​mmcblk0p2 rw earlycon rootfstype=ext4 rootwait ​clk_ignore_unused cpuidl1 
-[    0.000000] ​PID hash table entries: ​4096 (order: ​332768 bytes) +[    0.000000] ​Dentry cache hash table entries: ​524288 ​(order: ​104194304 ​bytes, linear
-[    0.000000] ​Dentry ​cache hash table entries: ​524288 ​(order: ​104194304 ​bytes) +[    0.000000] ​Inode-cache hash table entries: ​262144 ​(order: ​92097152 ​bytes, linear
-[    0.000000] ​Inode-cache hash table entries262144 (order92097152 bytes) +[    0.000000] ​mem auto-initstack:offheap alloc:off, heap free:off 
-[    0.000000] software IO TLB [mem 0x6bfff000-0x6ffff000] (64MB) ​mapped at [ffffffc06bfff000-ffffffc06fffefff] +[    0.000000] software IO TLB: mapped ​[mem 0x000000003bfff000-0x000000003ffff000] (64MB) 
-[    0.000000] Memory: ​3783916K/4194304K available (10108K ​kernel code, 744K rwdata, ​4432K rodata, ​512K init, 2156K bss, 148244K reserved, 262144K cma-reserved) +[    0.000000] Memory: ​3761492K/4194304K available (15488K ​kernel code, 1672K rwdata, ​11952K ​rodata, ​2496K init, 507K bss, 170668K ​reserved) 
-[    0.000000] ​Virtual kernel memory layout: +[    0.000000] ​rcu: Hierarchical RCU implementation. 
-[    0.000000] ​    ​modules : 0xffffff8000000000 - 0xffffff8008000000 ​  ​( ​  128 MB) +[    0.000000] ​rcu:     RCU event tracing is enabled. 
-[    0.000000] ​    ​vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ​  ​( ​  250 GB) +[    0.000000] ​rcu:     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. 
-[    0.000000] ​      .text : 0xffffff8008080000 - 0xffffff8008a60000 ​  ( 10112 KB) +[    0.000000] ​rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. 
-[    0.000000] ​    ​.rodata : 0xffffff8008a60000 - 0xffffff8008ec0000 ​  ​( ​ 4480 KB) +[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16,​ nr_cpu_ids=4
-[    0.000000] ​      .init : 0xffffff8008ec0000 - 0xffffff8008f40000 ​  ​( ​  512 KB) +
-[    0.000000] ​      .data : 0xffffff8008f40000 - 0xffffff8008ffa200 ​  ​( ​  745 KB) +
-[    0.000000] ​       .bss : 0xffffff8008ffa200 - 0xffffff8009215430 ​  ​( ​ 2157 KB) +
-[    0.000000] ​    ​fixed ​  : 0xffffffbefe7fd000 - 0xffffffbefec00000 ​  ​( ​ 4108 KB) +
-[    0.000000] ​    PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ​  ​( ​   16 MB) +
-[    0.000000] ​    ​vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ​  ​( ​    4 GB maximum) +
-[    0.000000] ​              ​0xffffffbf00000000 - 0xffffffbf1dc00000 ​  ​( ​  476 MB actual) +
-[    0.000000] ​    ​memory ​ : 0xffffffc000000000 - 0xffffffc880000000 ​  ( 34816 MB) +
-[    0.000000] ​Hierarchical RCU implementation. +
-[    0.000000] ​ RCU event tracing is enabled. +
-[    0.000000] ​ RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. +
-[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16,​ nr_cpu_ids=4+
 [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
 [    0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000 [    0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
 [    0.000000] GIC: Using split EOI/​Deactivate mode [    0.000000] GIC: Using split EOI/​Deactivate mode
 +[    0.000000] random: get_random_bytes called from start_kernel+0x31c/​0x550 with crng_init=0
 [    0.000000] arch_timer: cp15 timer(s) running at 33.33MHz (phys). [    0.000000] arch_timer: cp15 timer(s) running at 33.33MHz (phys).
-[    0.000000] clocksource:​ arch_sys_counter:​ mask: 0xffffffffffffff max_cycles: ​0x7b0074340, max_idle_ns: ​440795202884 ​ns +[    0.000000] clocksource:​ arch_sys_counter:​ mask: 0xffffffffffffff max_cycles: ​0x7b00c47c0, max_idle_ns: ​440795202120 ​ns 
-[    0.000003] sched_clock:​ 56 bits at 33MHz, resolution 30ns, wraps every 2199023255543ns +[    0.000003] sched_clock:​ 56 bits at 33MHz, resolution 30ns, wraps every 2199023255541ns 
-[    0.008323] Console: colour dummy device 80x25 +[    0.008361] Console: colour dummy device 80x25 
-[    0.012388] Calibrating delay loop (skipped), value calculated using timer frequency.. 66.66 BogoMIPS (lpj=133332+[    0.012394] Calibrating delay loop (skipped), value calculated using timer frequency.. 66.66 BogoMIPS (lpj=133333
-[    0.022669] pid_max: default: 32768 minimum: 301 +[    0.022667] pid_max: default: 32768 minimum: 301 
-[    0.027357] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) +[    0.027374] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear
-[    0.033923] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) +[    0.034613] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear
-[    0.041603] ASID allocator initialised with 65536 entries +[    0.043179rcu: Hierarchical SRCU implementation. 
-[    0.046417] Hierarchical SRCU implementation. +[    0.047369] EFI services will not be available. 
-[    0.051074] EFI services will not be available. +[    0.051756] smp: Bringing up secondary CPUs ... 
-[    0.055220] zynqmp_plat_init Platform Management API v1.1 +[    0.056463] Detected VIPT I-cache on CPU1 
-[    0.060557] zynqmp_plat_init Trustzone version v1.0 +[    0.056501] CPU1: Booted secondary processor ​0x0000000001 ​[0x410fd034
-[    0.065496] smp: Bringing up secondary CPUs ... +[    0.056844] Detected VIPT I-cache on CPU2 
-[    0.070160] Detected VIPT I-cache on CPU1 +[    0.056866] CPU2: Booted secondary processor ​0x0000000002 ​[0x410fd034
-[    0.070191] CPU1: Booted secondary processor [410fd034+[    0.057182] Detected VIPT I-cache on CPU3 
-[    0.070481] Detected VIPT I-cache on CPU2 +[    0.057203] CPU3: Booted secondary processor ​0x0000000003 ​[0x410fd034
-[    0.070501] CPU2: Booted secondary processor [410fd034+[    0.057245] smp: Brought up 1 node, 4 CPUs 
-[    0.070781] Detected VIPT I-cache on CPU3 +[    0.091606] SMP: Total of 4 processors activated. 
-[    0.070801] CPU3: Booted secondary processor [410fd034+[    0.096278] CPU features: detected: 32-bit EL0 Support 
-[    0.070847] smp: Brought up 1 node, 4 CPUs +[    0.101382] CPU features: detected: CRC32 instructions 
-[    0.101470] SMP: Total of 4 processors activated. +[    0.106518] CPU: All CPU(s) started at EL2 
-[    0.106143] CPU features: detected ​feature: 32-bit EL0 Support +[    0.110562] alternatives:​ patching kernel code 
-[    0.111941] CPU: All CPU(s) started at EL2 +[    0.115944] devtmpfs: initialized 
-[    0.116012] alternatives:​ patching kernel code +[    0.125323] Registered cp15_barrier emulation handler 
-[    0.121177] devtmpfs: initialized +[    0.125372] Registered setend emulation handler 
-[    0.130834] clocksource:​ jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns:​ 7645041785100000 ns +[    0.129346] clocksource:​ jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns:​ 7645041785100000 ns 
-[    0.134930] futex hash table entries: 1024 (order: ​5131072 ​bytes) +[    0.138935] futex hash table entries: 1024 (order: ​465536 bytes, linear
-[    0.147153xormeasuring software checksum speed +[    0.151744pinctrl coreinitialized pinctrl subsystem 
-[    0.185224   ​8regs ​     ​2047.000 MB/sec +[    0.152337NETRegistered protocol family 16 
-[    0.225258   ​8regs_prefetch ​1825.000 MB/sec +[    0.156729DMApreallocated 512 KiB GFP_KERNEL pool for atomic allocations 
-[    0.265293   ​32regs ​   ​ ​2516.000 MB/sec +[    0.162816DMApreallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations 
-[    0.305326   ​32regs_prefetch ​2114.000 MB/sec +[    0.170539DMApreallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations 
-[    0.305355xorusing function: 32regs ​(2516.000 MB/sec+[    0.178353auditinitializing netlink subsys ​(disabled
-[    0.309731pinctrl coreinitialized pinctrl subsystem +[    0.183803audittype=2000 audit(0.116:1)state=initialized audit_enabled=res=
-[    ​0.315353] NETRegistered protocol family 16 +[    0.184104] hw-breakpoint:​ found 6 breakpoint and 4 watchpoint registers. 
-[    0.320133] cpuidleusing governor menu +[    0.198177ASID allocator initialised with 65536 entries 
-[    ​0.323806] vdso: 2 pages (code @ ffffff8008a66000,​ 1 data @ ffffff8008f44000) +[    0.222829HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages 
-[    0.330523] hw-breakpoint:​ found 6 breakpoint and 4 watchpoint registers. +[    0.223888HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages 
-[    0.337760DMA: preallocated 256 KiB pool for atomic allocations +[    0.230544HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages 
-[    0.367510zynqmp-pinctrl pinctrl: zynqmp pinctrl initialized +[    0.237205] HugeTLB registered ​64.0 KiB page size, pre-allocated 0 pages 
-[    0.368562reset_zynqmp reset-controller: Xilinx zynqmp reset driver probed +[    ​1.208657] DRBG: Continuing without Jitter RNG 
-[    0.375283ARM CCI_400_r1 PMU driver probed +[    1.284514] raid6: ​neonx8 ​  gen()  ​2356 ​MB/s 
-[    0.385206] HugeTLB registered ​2.00 MiB page size, pre-allocated 0 pages +[    ​1.352561] raid6: ​neonx8 ​  xor()  ​1757 ​MB/s 
-[    ​0.455137] raid6: ​int64x1  ​gen()   363 MB/s +[    ​1.420621] raid6: ​neonx4 ​  gen()  ​2400 ​MB/s 
-[    ​0.523090] raid6: ​int64x1  ​xor()   396 MB/s +[    ​1.488662] raid6: ​neonx4 ​  xor()  ​1717 ​MB/s 
-[    ​0.591184] raid6: ​int64x2  ​gen()   602 MB/s +[    ​1.556727] raid6: ​neonx2 ​  gen()  ​2274 ​MB/s 
-[    ​0.659196] raid6: ​int64x2  ​xor()   536 MB/s +[    ​1.624764] raid6: ​neonx2 ​  xor()  ​1578 ​MB/s 
-[    ​0.727208] raid6: ​int64x4  ​gen()   877 MB/s +[    ​1.692829] raid6: ​neonx1 ​  gen()  ​1948 MB/s 
-[    ​0.795263] raid6: ​int64x4  ​xor()   659 MB/s +[    ​1.760876] raid6: ​neonx1 ​  xor()  ​1339 ​MB/s 
-[    ​0.863307] raid6: ​int64x8  ​gen()  ​1021 MB/s +[    ​1.828924] raid6: ​int64x8  ​gen()  ​1578 ​MB/s 
-[    ​0.931367] raid6: ​int64x8  ​xor()   664 MB/s +[    1.896976] raid6: ​int64x8  ​xor()   846 MB/s 
-[    ​0.999412] raid6: ​neonx1 ​  gen()   644 MB/s +[    1.965032] raid6: ​int64x4  ​gen()  ​1754 MB/s 
-[    1.067476] raid6: ​neonx1 ​  xor()   756 MB/s +[    ​2.033084] raid6: ​int64x4  ​xor()   897 MB/s 
-[    1.135536] raid6: ​neonx2 ​  gen()  ​1039 MB/s +[    ​2.101150] raid6: ​int64x2  ​gen()  ​1535 MB/s 
-[    ​1.203602] raid6: ​neonx2 ​  xor()  ​1073 ​MB/s +[    ​2.169190] raid6: ​int64x2  ​xor()   823 MB/s 
-[    ​1.271669] raid6: ​neonx4 ​  gen()  ​1341 MB/s +[    ​2.237260] raid6: ​int64x1  ​gen()  ​1131 MB/s 
-[    ​1.339706] raid6: ​neonx4 ​  xor()  ​1281 ​MB/s +[    ​2.305308] raid6: ​int64x1  ​xor()   567 MB/s 
-[    ​1.407775] raid6: ​neonx8 ​  gen()  ​1410 MB/s +[    ​2.305344] raid6: using algorithm ​neonx4 ​gen() 2400 MB/s 
-[    ​1.475796] raid6: ​neonx8 ​  xor()  ​1336 ​MB/s +[    ​2.309298] raid6: .... xor() 1717 MB/s, rmw enabled 
-[    ​1.475823] raid6: using algorithm ​neonx8 ​gen() 1410 MB/s +[    ​2.314233] raid6: using neon recovery algorithm 
-[    ​1.479791] raid6: .... xor() 1336 MB/s, rmw enabled +[    ​2.319145] iommu: Default domain type: Translated  
-[    ​1.484722] raid6: using neon recovery algorithm +[    2.323858] SCSI subsystem initialized 
-[    ​1.490628] SCSI subsystem initialized +[    ​2.327513] usbcore: registered new interface driver usbfs 
-[    ​1.493184] usbcore: registered new interface driver usbfs +[    ​2.332854] usbcore: registered new interface driver hub 
-[    ​1.498512] usbcore: registered new interface driver hub +[    ​2.338129] usbcore: registered new device driver usb 
-[    ​1.503784] usbcore: registered new device driver usb +[    ​2.343240mc: Linux media interface: v0.10 
-[    ​1.508827media: Linux media interface: v0.10 +[    ​2.347380videodev: ​Linux video capture interface: v2.00 
-[    ​1.513287] Linux video capture interface: v2.00 +[    ​2.352865EDAC MCVer: 3.0.0 
-[    ​1.517883pps_coreLinuxPPS API ver1 registered +[    ​2.356269zynqmp-ipi-mbox mailbox@ff990400Registered ZynqMP IPI mbox with TX/RX channels. 
-[    ​1.522783pps_coreSoftware ver5.3.Copyright 2005-2007 Rodolfo Giometti ​<giometti@linux.it+[    2.364886] jesd204: created con: id=0, topo=0, link=0, /​fpga-axi@0/​axi-jesd204-tx@84a30000 <-> /​fpga-axi@0/​axi-adrv9009-tx-hpc@84a04000 
-[    1.531875PTP clock support registered +[    2.376610] jesd204: created con: id=1, topo=0, link=0, /​fpga-axi@0/​axi-adxcvr-tx@84a20000 <-> /​fpga-axi@0/​axi-jesd204-tx@84a30000 
-[    1.536000zynqmp-ipi ff9905c0.mailboxProbed ZynqMP IPI Mailbox driver+[    2.388288] jesd204: created con: id=2, topo=0, link=0, /​axi/​spi@ff040000/​hmc7044@2 <-> /​fpga-axi@0/​axi-adxcvr-tx@84a20000 
-[    1.542718FPGA manager framework +[    2.399271] jesd204: created con: id=3, topo=0, link=2, /​fpga-axi@0/​axi-adxcvr-rx-os@84a60000 <-> /​fpga-axi@0/​axi-jesd204-rx@84a70000 
-[    1.546063fpga-region fpga-full: FPGA Region probed +[    2.411213] jesd204: created con: id=4, topo=0, link=2, /​axi/​spi@ff040000/​hmc7044@2 <-> /fpga-axi@0/​axi-adxcvr-rx-os@84a60000 
-[    ​1.551065] Advanced Linux Sound Architecture Driver Initialized. +[    2.422455] jesd204: created con: id=5, topo=0, link=1, /​fpga-axi@0/​axi-adxcvr-rx@84a40000 ​<-> /fpga-axi@0/​axi-jesd204-rx@84a50000 
-[    ​1.557291] Bluetooth: Core ver 2.22 +[    2.434132] jesd204: created con: id=6, topo=0, link=1, /​axi/​spi@ff040000/​hmc7044@2 <-/​fpga-axi@0/​axi-adxcvr-rx@84a40000 
-[    ​1.560596] NET: Registered protocol family 31 +[    ​2.445122] jesd204: created con: id=7, topo=0, link=1, /​axi/​spi@ff040000/​hmc7044-car@3 <-> /​axi/​spi@ff040000/​hmc7044@2 
-[    ​1.564997] Bluetooth: HCI device and connection manager initialized +[    2.455843jesd204: created con: id=8, topo=0, link=2, /​axi/​spi@ff040000/​hmc7044-car@3 <-> /​axi/​spi@ff040000/​hmc7044@2 
-[    ​1.571313] Bluetooth: HCI socket layer initialized +[    ​2.466570] jesd204: created con: id=9, topo=0, link=0, /​axi/​spi@ff040000/​hmc7044-car@3 <-> /​axi/​spi@ff040000/​hmc7044@2 
-[    ​1.576155] Bluetooth: L2CAP socket layer initialized +[    2.477328] jesd204: created con: id=10, topo=0, link=1, /​fpga-axi@0/​axi-jesd204-rx@84a50000 <-> /​axi/​spi@ff040000/​adrv9009-phy-b@1 
-[    ​1.581186] Bluetooth: SCO socket layer initialized +[    2.489065jesd204: created con: id=11, topo=0, link=2, /fpga-axi@0/​axi-jesd204-rx@84a70000 <-> /​axi/​spi@ff040000/​adrv9009-phy-b@1 
-[    ​1.586633] clocksource:​ Switched to clocksource arch_sys_counter +[    2.500830] jesd204created con: id=12, topo=0, link=0, /​fpga-axi@0/​axi-adrv9009-tx-hpc@84a04000 <-> /​axi/​spi@ff040000/​adrv9009-phy-b@1 
-[    ​1.592151] VFS: Disk quotas dquot_6.6.0 +[    2.513070] jesd204: created con: id=13, topo=0, link=1, /​axi/​spi@ff040000/​adrv9009-phy-b@1 <-> /​axi/​spi@ff040000/​adrv9009-phy@0 
-[    ​1.596010] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) +[    ​2.524546] jesd204: created con: id=14, topo=0, link=2, /​axi/​spi@ff040000/​adrv9009-phy-b@<-> /​axi/​spi@ff040000/​adrv9009-phy@0 
-[    ​1.607024] NET: Registered protocol family 2 +[    2.536062jesd204: created con: id=15, topo=0, link=0, /​axi/​spi@ff040000/​adrv9009-phy-b@1 <-> /​axi/​spi@ff040000/​adrv9009-phy@0 
-[    ​1.607416] TCP established hash table entries: 32768 (order: 6, 262144 bytes) +[    ​2.547543] jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0:​ JESD204[0:​0] transition uninitialized -> initialized 
-[    ​1.614527] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) +[    2.557215] jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0:​ JESD204[0:1] transition uninitialized -> initialized 
-[    ​1.621359] TCP: Hash tables configured (established 32768 bind 32768) +[    2.566903jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0: JESD204[0:​2] transition uninitialized ​-> initialized 
-[    ​1.627426] UDP hash table entries: 2048 (order: 4, 65536 bytes) +[    2.576587] jesd204found 11 devices and 1 topologies 
-[    ​1.633413] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) +[    2.581715] ​FPGA manager framework 
-[    ​1.639895] NET: Registered protocol family 1 +[    ​2.585176] Advanced Linux Sound Architecture Driver Initialized. 
-[    ​1.644249] RPC: Registered named UNIX socket transport module. +[    ​2.591475] Bluetooth: Core ver 2.22 
-[    ​1.649945] RPC: Registered udp transport module. +[    ​2.594675] NET: Registered protocol family 31 
-[    ​1.654611] RPC: Registered tcp transport module. +[    ​2.599078] Bluetooth: HCI device and connection manager initialized 
-[    ​1.659281] RPC: Registered tcp NFSv4.1 backchannel transport module. +[    ​2.605395] Bluetooth: HCI socket layer initialized 
-[    ​1.666213] hw perfevents: no interrupt-affinity property for /pmu, guessing. +[    ​2.610237] Bluetooth: L2CAP socket layer initialized 
-[    ​1.672962] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available +[    ​2.615260] Bluetooth: SCO socket layer initialized 
-[    ​1.681095audit: initializing netlink subsys (disabled) +[    ​2.620423] clocksource:​ Switched to clocksource arch_sys_counter 
-[    ​1.685914] audit: type=2000 audit(1.631:​1):​ state=initialized audit_enabled=0 res=1 +[    ​2.626256] VFS: Disk quotas dquot_6.6.0 
-[    1.686317] workingset: timestamp_bits=62 max_order=20 bucket_order=0 +[    ​2.630089] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 
-[    ​1.700657] NFS: Registering the id_resolver key type +[    ​2.640491] NET: Registered protocol family 2 
-[    ​1.704971] Key type id_resolver registered +[    ​2.641518] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) 
-[    ​1.709106] Key type id_legacy registered +[    2.649721] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear
-[    ​1.713090] nfs4filelayout_init:​ NFSv4 File Layout Driver Registering... +[    ​2.657734] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear
-[    ​1.719758] jffs2: version 2.2. (NAND) (SUMMARY) ​ �© 2001-2006 Red Hat, Inc. +[    ​2.665174] TCP: Hash tables configured (established 32768 bind 32768) 
-[    ​1.753319Block layer SCSI generic ​(bsg) driver ​version ​0.4 loaded ​(major 247+[    ​2.671367] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear
-[    ​1.755070io scheduler noop registered +[    ​2.678032] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear
-[    ​1.758968io scheduler deadline ​registered +[    ​2.685189] NET: Registered protocol family 1 
-[    ​1.763211io scheduler cfq registered ​(default+[    ​2.689645] RPC: Registered named UNIX socket transport module. 
-[    ​1.767867] io scheduler mq-deadline registered +[    ​2.695275] RPC: Registered udp transport module. 
-[    ​1.772364] io scheduler kyber registered +[    ​2.699940] RPC: Registered tcp transport module. 
-[    ​1.778180] xilinx-dpdma fd4c0000.dma:​ Xilinx DPDMA engine is probed +[    ​2.704608] RPC: Registered tcp NFSv4.1 backchannel transport module. 
-[    1.811060] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled +[    ​2.711551] PCI: CLS 0 bytes, default 64 
-[    ​1.814439] cacheinfo: Unable to detect cache hierarchy for CPU 0 +[    2.715267] hw perfevents: no interrupt-affinity property for /pmu, guessing. 
-[    ​1.822332] brd: module loaded +[    ​2.722149] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available 
-[    ​1.825796] loop: module loaded +[    ​2.730382Initialise system trusted keyrings 
-[    ​1.826457mtdoops: mtd device (mtddev=name/​number) must be supplied +[    ​2.734184] workingset: timestamp_bits=62 max_order=20 bucket_order=0 
-[    ​1.832536] libphy: Fixed MDIO Bus: probed +[    ​2.741039] NFS: Registering the id_resolver key type 
-[    ​1.835518] tun: Universal TUN/TAP device driver, 1.6 +[    ​2.745535] Key type id_resolver registered 
-[    ​1.839638] CAN device driver interface +[    ​2.749675] Key type id_legacy registered 
-[    ​1.843839] macb ff0b0000.ethernet:​ Not enabling partial store and forward +[    ​2.753666] nfs4filelayout_init:​ NFSv4 File Layout Driver Registering... 
-[    1.875869] macb ff0e0000.ethernet:​ Not enabling partial store and forward +[    ​2.760329] jffs2: version 2.2. (NAND) (SUMMARY) ​ �© 2001-2006 Red Hat, Inc. 
-[    1.903460] usbcore: registered new interface driver asix +[    ​2.767476fuse: init (API version ​7.32) 
-[    ​1.903535] usbcore: registered new interface driver ax88179_178a +[    2.804010] NET: Registered protocol family 38 
-[    ​1.909297] usbcore: registered new interface driver cdc_ether +[    2.804051] xor: measuring software checksum speed 
-[    ​1.915092] usbcore: registered new interface driver net1080 +[    2.811368] ​   8regs           : ​ 2593 MB/sec 
-[    ​1.920710] usbcore: registered new interface driver cdc_subset +[    2.815095] ​   32regs ​         :  3071 MB/sec 
-[    ​1.926592] usbcore: registered new interface driver zaurus +[    2.819983] ​   arm64_neon ​     :  2612 MB/sec 
-[    ​1.932137] usbcore: registered new interface driver cdc_ncm +[    2.820543] xor: using function: 32regs ​(3071 MB/sec
-[    ​1.937967xilinx-axipmon ffa00000.perf-monitorProbed Xilinx APM +[    ​2.825565Key type asymmetric ​registered 
-[    ​1.945448] usbcore: registered new interface driver uas +[    ​2.829626Asymmetric key parser '​x509' ​registered 
-[    ​1.949269] usbcore: registered new interface driver usb-storage +[    ​2.834485Block layer SCSI generic ​(bsg) driver version 0.4 loaded (major 248
-[    ​1.955497i2c /dev entries ​driver +[    ​2.841823] io scheduler mq-deadline registered 
-[    ​1.959608IR NEC protocol handler initialized +[    ​2.846320] io scheduler kyber registered 
-[    ​1.963162IR RC5(x/sz) protocol handler initialized +[    ​2.873248] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 
-[    ​1.968176IR RC6 protocol handler initialized +[    ​2.877054] cacheinfo: Unable to detect cache hierarchy for CPU 0 
-[    ​1.972676IR JVC protocol handler initialized +[    ​2.883828] brd: module loaded 
-[    ​1.977171IR Sony protocol handler initialized +[    ​2.887717] loop: module loaded 
-[    ​1.981756IR SANYO protocol handler initialized +[    ​2.887956Registered mathworks_ip class 
-[    1.986427] IR Sharp protocol handler initialized +[    ​2.891876] libphy: Fixed MDIO Bus: probed 
-[    1.991098] IR MCE Keyboard/mouse protocol handler initialized +[    ​2.895120] tun: Universal TUN/TAP device driver, 1.6 
-[    ​1.996894] IR XMP protocol handler initialized +[    ​2.899287] CAN device driver interface 
-[    2.002058] usbcore: registered new interface driver uvcvideo +[    ​2.903665] usbcore: registered new interface driver asix 
-[    ​2.007103] USB Video Class driver (1.1.1) +[    ​2.908433] usbcore: registered new interface driver ax88179_178a 
-[    ​2.011309] axi_fan_control_driver 80000000.axi-fan-control: ​Re-mapped from 0x80000000 to ffffff800b6d0000 +[    ​2.914465] usbcore: registered new interface driver cdc_ether 
-[    ​2.020776axi_fan_control_driver 80000000.axi-fan-controlMajor version mismatch. Expected 1.00.a, Reported 0.01. +[    ​2.920252] usbcore: registered new interface driver net1080 
-[    ​2.031736] cdns-wdt fd4d0000.watchdog:​ Xilinx Watchdog Timer at ffffff800921e000 with timeout 60s +[    ​2.925874] usbcore: registered new interface driver cdc_subset 
-[    ​2.040410] Bluetooth: HCI UART driver ver 2.3 +[    ​2.931757] usbcore: registered new interface driver zaurus 
-[    ​2.044647] Bluetooth: HCI UART protocol ​H4 registered +[    ​2.937304] usbcore: registered new interface driver cdc_ncm 
-[    ​2.049747] Bluetooth: HCI UART protocol ​BCSP registered +[    ​2.943539ehci_hcd: USB 2.0 '​Enhanced'​ Host Controller (EHCI) Driver 
-[    ​2.055023] Bluetooth: HCI UART protocol ATH3K registered +[    2.949387] ehci-pciEHCI PCI platform driver 
-[    ​2.060385] Bluetooth: HCI UART protocol Three-wire (H5) registered +[    ​2.954123] usbcore: registered new interface driver uas 
-[    ​2.066657] Bluetooth: HCI UART protocol Intel registered +[    ​2.959105] usbcore: registered new interface driver usb-storage 
-[    ​2.071977] Bluetooth: HCI UART protocol QCA registered +[    ​2.965091usbcore: registered new interface ​driver ​usbserial_generic 
-[    ​2.077196] usbcore: registered new interface driver bcm203x +[    ​2.971542usbserial: USB Serial support registered for generic 
-[    ​2.082816] usbcore: registered new interface driver bpa10x +[    ​2.977514usbcore: registered new interface driver ftdi_sio 
-[    ​2.088353] usbcore: registered new interface driver bfusb +[    ​2.983218usbserial: USB Serial support registered for FTDI USB Serial Device 
-[    ​2.093804] usbcore: registered new interface driver btusb +[    ​2.990492usbcore: registered new interface driver upd78f0730 
-[    ​2.099226] Bluetooth: Generic Bluetooth SDIO driver ver 0.1 +[    ​2.996366usbserial: USB Serial support registered for upd78f0730 
-[    2.104890] usbcore: registered new interface driver ath3k +[    ​3.003433i2c /dev entries driver 
-[    ​2.110751cpufreqcpufreq_onlineCPU0Running at unlisted freq: 1066666 KHz +[    ​3.007452] usbcore: registered new interface driver uvcvideo 
-[    ​2.117695cpufreqcpufreq_onlineCPU0Unlisted initial frequency changed ​to: 1199999 KHz +[    ​3.011755] USB Video Class driver (1.1.1) 
-[    ​2.126504] sdhci: Secure Digital Host Controller Interface driver +[    ​3.016188] axi_fan_control_driver 80000000.axi-fan-control: ​clk_get failed with -517 
-[    ​2.132269] sdhci: Copyright(c) Pierre Ossman +[    ​3.024182BluetoothHCI UART driver ver 2.3 
-[    ​2.136593] sdhci-pltfm:​ SDHCI platform and OF driver helper +[    ​3.028020] Bluetooth: HCI UART protocol H4 registered 
-[    ​2.143439] ledtrig-cpu:​ registered to indicate activity on CPUs +[    ​3.033118] Bluetooth: HCI UART protocol ​BCSP registered 
-[    ​2.148321] usbcore: registered new interface driver usbhid +[    ​3.038407] Bluetooth: HCI UART protocol ​LL registered 
-[    ​2.153722] usbhid: USB HID core driver +[    ​3.043498] Bluetooth: HCI UART protocol ATH3K registered 
-[    ​2.206546] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered +[    ​3.048872] Bluetooth: HCI UART protocol Three-wire (H5) registered 
-[    ​2.208080] pktgen: Packet Generator for packet performance testing. Version: 2.75 +[    ​3.055118] Bluetooth: HCI UART protocol Intel registered 
-[    ​2.215060] Netfilter messages via NETLINK v0.30. +[    ​3.060465] Bluetooth: HCI UART protocol QCA registered 
-[    2.219659] ip_tables: (C) 2000-2006 Netfilter Core Team +[    ​3.065665] usbcore: registered new interface driver bcm203x 
-[    2.224955] Initializing XFRM netlink socket +[    ​3.071286] usbcore: registered new interface driver bpa10x 
-[    ​2.229113] NET: Registered protocol family 10 +[    ​3.076822] usbcore: registered new interface driver bfusb 
-[    ​2.233830] Segment Routing with IPv6 +[    ​3.082274] usbcore: registered new interface driver btusb 
-[    ​2.237141] ip6_tables: (C) 2000-2006 Netfilter Core Team +[    ​3.087733] usbcore: registered new interface driver ath3k 
-[    2.242594] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver +[    ​3.093257EDAC MC036 UE DDR ECC error type :UE Row 0 Bank 0 BankGroup Number 0 Block Number 0 on mc#​0csrow#​0channel#​0 (csrow:0 chann) 
-[    ​2.248661] NET: Registered protocol family 17 +[    ​3.108288EDAC MC0Giving out device to module 1 controller synps_ddr_controllerDEV synps_edac (INTERRUPT) 
-[    ​2.252766] NET: Registered protocol family 15 +[    3.118380] EDAC DEVICE0Giving out device ​to module zynqmp-ocm-edac controller zynqmp_ocmDEV ff960000.memory-controller (INTERRUPT) 
-[    ​2.257180] bridge: filtering via arp/​ip/​ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. +[    ​3.130636] sdhci: Secure Digital Host Controller Interface driver 
-[    2.270056] Ebtables v2.0 registered +[    ​3.136490] sdhci: Copyright(c) Pierre Ossman 
-[    2.273682] can: controller area network core (rev 20170425 abi 9) +[    ​3.140811] sdhci-pltfm:​ SDHCI platform and OF driver helper 
-[    ​2.279769] NET: Registered protocol family 29 +[    ​3.146774] ledtrig-cpu:​ registered to indicate activity on CPUs 
-[    ​2.284157] can: raw protocol ​(rev 20170425) +[    ​3.152419] SMCCC: SOC_ID: ARCH_SOC_ID not implemented,​ skipping .... 
-[    ​2.288393] can: broadcast manager protocol ​(rev 20170425 t) +[    3.158839] zynqmp_firmware_probe Platform Management API v1.1 
-[    ​2.294018] can: netlink gateway ​(rev 20170425) ​max_hops=1 +[    3.164601] zynqmp_firmware_probe Trustzone version v1.0 
-[    ​2.299519] Bluetooth: RFCOMM TTY layer initialized +[    3.210464] zynqmp-pinctrl firmware:​zynqmp-firmware:​pinctrl:​ zynqmp pinctrl initialized 
-[    ​2.304315] Bluetooth: RFCOMM socket layer initialized +[    3.261518] zynqmp-aes firmware:​zynqmp-firmware:​zynqmp-aes:​ will run requests pump with realtime priority 
-[    ​2.309420] Bluetooth: RFCOMM ver 1.11 +[    3.276577] alg: No test for xilinx-keccak-384 (zynqmp-keccak-384) 
-[    ​2.313136] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 +[    3.277249] alg: No test for xilinx-zynqmp-rsa (zynqmp-rsa) 
-[    ​2.318409] Bluetooth: BNEP filters: protocol multicast +[    3.282776] usbcore: registered new interface driver usbhid 
-[    ​2.323604] Bluetooth: BNEP socket layer initialized +[    ​3.288183] usbhid: USB HID core driver 
-[    ​2.328530] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 +[    ​3.298771] axi_sysid 85000000.axi-sysid-0:​ AXI System ID core version (1.01.a) found 
-[    ​2.334413] Bluetooth: HIDP socket layer initialized +[    3.301131] axi_sysid 85000000.axi-sysid-0:​ [(null)] on [adrv9009zu11eg] git branch <​hdl_2021_r1>​ git <​6a6c5acc8ec422c068c7787cdeb5b0ee4C 
-[    ​2.339445] 9pnet: Installing 9P2000 support +[    3.317071] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered 
-[    ​2.343595] Key type dns_resolver registered +[    ​3.323424] usbcore: registered new interface driver snd-usb-audio 
-[    ​2.348279] registered taskstats version 1 +[    3.330825] pktgen: Packet Generator for packet performance testing. Version: 2.75 
-[    ​2.352220] Btrfs loaded, crc32c=crc32c-generic +[    ​3.337115] Initializing XFRM netlink socket 
-�ہ   2.370929console [ttyPS0] enabledat ​MMIO 0xff010000 (irq = 22, base_baud = 6249999) is a xuartps +[    ​3.340999] NET: Registered protocol family 10 
-[    ​2.370929] console [ttyPS0] enabled +[    ​3.345682] Segment Routing with IPv6 
-[    ​2.374506] bootconsole [cdns0] disabled +[    ​3.349090] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver 
-[    ​2.374506] bootconsole [cdns0] disabled +[    ​3.355144] NET: Registered protocol family 17 
-[    ​2.382895GPIO line 13 (ulpi-phy-reset) hogged as output/​high +[    ​3.359259] NET: Registered protocol family 15 
-[    ​2.392770] xilinx-psgtr fd400000.zynqmp_phyLane:3 type:8 protocol:4 pll_locked:​yes +[    ​3.363753] can: controller area network core 
-[    ​2.400962PLL: shutdown +[    ​3.368008] NET: Registered protocol family 29 
-[    2.404926] zynqmp_pll_set_rate() set divider failed for dpll_int, ret = -13 +[    ​3.372404] can: raw protocol 
-[    2.412016] zynqmp_clk_divider_set_rate() set divider failed for gpu_ref_div1,​ ret = -13 +[    ​3.375339] can: broadcast manager protocol 
-[    ​2.421593] xilinx-dp-snd-codec fd4a0000.zynqmp-display:​zynqmp_dp_snd_codec0:​ Failed to get required clock freq +[    ​3.379496] can: netlink gateway ​max_hops=1 
-[    ​2.431694] xilinx-dp-snd-codec:​ probe of fd4a0000.zynqmp-display:​zynqmp_dp_snd_codec0 failed with error -22 +[    ​3.383882] Bluetooth: RFCOMM TTY layer initialized 
-[    ​2.441756] xilinx-dp-snd-pcm zynqmp_dp_snd_pcm0:​ Xilinx DisplayPort Sound PCM probed +[    ​3.388667] Bluetooth: RFCOMM socket layer initialized 
-[    ​2.449813] xilinx-dp-snd-pcm zynqmp_dp_snd_pcm1:​ Xilinx DisplayPort Sound PCM probed +[    ​3.393776] Bluetooth: RFCOMM ver 1.11 
-[    ​2.457888] xilinx-dp-snd-card fd4a0000.zynqmp-display:​zynqmp_dp_snd_card:​ ASoC: CPU DAI (null) not registered +[    ​3.397485] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 
-[    2.467957] OF: graph: no port node found in /amba/zynqmp-display@fd4a0000 +[    ​3.402758] Bluetooth: BNEP filters: protocol multicast 
-[    ​2.474991[drm] Supports vblank timestamp caching Rev 2 (21.10.2013). +[    ​3.407950] Bluetooth: BNEP socket layer initialized 
-[    ​2.481600] [drm] No driver support for vblank timestamp query. +[    ​3.412878] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 
-[    ​2.487557xlnx-drm xlnx-drm.0: bound fd4a0000.zynqmp-display ​(ops 0xffffff8008b11f30) +[    ​3.418763] Bluetooth: HIDP socket layer initialized 
-[    ​2.519821PLLenable +[    ​3.423797] 9pnet: Installing 9P2000 support 
-[    ​2.649238Consoleswitching to colour frame buffer device 240x67 +[    ​3.427940] NET: Registered protocol family 36 
-[    ​2.674637zynqmp-display fd4a0000.zynqmp-displayfb0 frame buffer device +[    3.432354] Key type dns_resolver registered 
-[    ​2.681970] [drmInitialized xlnx 1.0.0 20130509 for fd4a0000.zynqmp-display on minor +[    ​3.436762] registered taskstats version 1 
-[    ​2.690077zynqmp-display fd4a0000.zynqmp-displayZynqMP DisplayPort Subsystem driver probed +[    ​3.440652] Loading compiled-in X.509 certificates 
-[    ​2.699142macb ff0b0000.ethernetNot enabling partial store and forward +[    3.445743] Btrfs loaded, crc32c=crc32c-generic 
-[    ​2.706553libphyMACB_mii_bus:​ probed +[    3.457843ff010000.serial: ​ttyPS0 ​at MMIO 0xff010000 (irq = 31, base_baud = 6249999) is a xuartps 
-[    ​2.740068] macb ff0e0000.ethernet:​ Not enabling partial store and forward +[    ​3.466866printk: ​console [ttyPS0] enabled 
-[    ​2.747391] libphy: MACB_mii_bus:​ probed +[    ​3.466866printk: console [ttyPS0] enabled 
-[    ​2.822746] macb ff0e0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0e0000 irq 14 (1e:d5:da:08:37:fe+[    3.471160] printk: ​bootconsole [cdns0] disabled 
-[    ​2.832574Marvell 88E1510 ff0e0000.ethernet-ffffffff:00: attached PHY driver ​[Marvell 88E1510(mii_bus:phy_addr=ff0e0000.ethernet-ffffffff:00, irq=POLL) +[    ​3.471160printk: ​bootconsole [cdns0] disabled 
-[    ​2.848331] xilinx-psgtr fd400000.zynqmp_phyLane:1 type:0 protocol:3 pll_locked:yes +[    ​3.480447of-fpga-region fpga-full: FPGA Region probed 
-[    ​2.858414xhci-hcd xhci-hcd.0.autoxHCI Host Controller +[    3.490483] gpio-13 (ulpi-phy-reset)hogged as output/​high 
-[    ​2.863909xhci-hcd xhci-hcd.0.autonew USB bus registeredassigned ​bus number ​+[    ​3.497715] xilinx-zynqmp-dpdma fd4c0000.dma-controllerXilinx DPDMA engine is probed 
-[    ​2.871802xhci-hcd xhci-hcd.0.autohcc params 0x0238f625 hci version 0x100 quirks 0x22010010 +[    ​3.506449zynqmp-display fd4a0000.display: vtc bridge property not present 
-[    ​2.880522xhci-hcd xhci-hcd.0.autoirq 34, io mem 0xfe200000 +[    ​3.515394] xilinx-dp-snd-codec fd4a0000.display:​zynqmp_dp_snd_codec0:​ Failed to get required clock freq 
-[    ​2.886556usb usb1New USB device foundidVendor=1d6b,​ idProduct=0002 +[    ​3.524898] xilinx-dp-snd-codec:​ probe of fd4a0000.display:​zynqmp_dp_snd_codec0 failed with error -22 
-[    ​2.893344usb usb1New USB device stringsMfr=3Product=2SerialNumber=1 +[    ​3.535124] xilinx-dp-snd-pcm zynqmp_dp_snd_pcm0:​ Xilinx DisplayPort Sound PCM probed 
-[    ​2.900561usb usb1ProductxHCI Host Controller +[    ​3.543954] xilinx-dp-snd-pcm zynqmp_dp_snd_pcm1:​ Xilinx DisplayPort Sound PCM probed 
-[    ​2.905430usb usb1ManufacturerLinux 4.14.0-12222-g6598c88 xhci-hcd +[    ​3.552860] OF: graph: no port node found in /axi/​display@fd4a0000 
-[    ​2.912122usb usb1SerialNumberxhci-hcd.0.auto +[    ​3.559244xlnx-drm xlnx-drm.0: bound fd4a0000.display (ops 0xffffffc010ffd810
-[    ​2.917295hub 1-0:1.0USB hub found +[    ​4.644438zynqmp-display fd4a0000.display: ​[drm] Cannot find any crtc or sizes 
-[    ​2.921056hub 1-0:1.01 port detected +[    ​4.652071[drm] Initialized ​xlnx 1.0.0 20130509 for fd4a0000.display on minor 0 
-[    ​2.925157xhci-hcd xhci-hcd.0.autoxHCI Host Controller +[    4.659562] ​zynqmp-display ​fd4a0000.display:​ ZynqMP DisplayPort Subsystem driver probed 
-[    ​2.930646xhci-hcd xhci-hcd.0.autonew USB bus registered, assigned bus number 2 +[    ​4.668777adrv9009 spi1.0adrv9009_probe : enter 
-[    ​2.938339usb usb2We don't know the algorithms for LPM for this hostdisabling LPM+[    ​4.674594adrv9009 spi1.1adrv9009_probe : enter 
-[    ​2.946513usb usb2New USB device foundidVendor=1d6bidProduct=0003 +[    ​4.760470hmc7044 spi1.3: PLL1: Locked, CLKIN3 @ 38400000 Hz, PFD: 7680 kHz PLL2: Locked @ 2949.120000 MHz 
-[    ​2.953294usb usb2New USB device strings: Mfr=3Product=2SerialNumber=1 +[    4.770830] jesd204: /​axi/​spi@ff040000/​hmc7044-car@3,​jesd204:3,​parent=spi1.3Using as SYSREF provider 
-[    ​2.960504usb usb2ProductxHCI Host Controller +[    ​4.780817hmc7044 spi1.4: Read/Write check failed (0xFF) 
-[    ​2.965375usb usb2ManufacturerLinux 4.14.0-12222-g6598c88 xhci-hcd +   ​4.833539hmc7044 spi1.4: Probed, SPI read support failed 
-[    ​2.972066usb usb2: SerialNumber:​ xhci-hcd.0.auto +[    4.840132] spi-nor spi0.0: SPI-NOR-UniqueID 104000a87704000209002100f73e717c69 
-[    ​2.977185hub 2-0:1.0: USB hub found +[    4.847824] random: fast init done 
-[    ​2.980948hub 2-0:1.0: 1 port detected +[    4.851386] spi-nor spi0.0: trying to lock already unlocked area 
-[    ​2.987163at24 0-002c2048 byte 24c16 EEPROMwritable, 1 bytes/write +[    4.857388] spi-nor spi0.0: n25q512a (131072 Kbytes) 
-[    ​2.993894cdns-i2c ff020000.i2c400 kHz mmio ff020000 irq 16 +[    ​4.8623624 fixed-partitions partitions found on MTD device spi0.
-[    ​3.258646usb 1-1new full-speed USB device number 2 using xhci-hcd +[    4.868706] Creating 4 MTD partitions on "​spi0.0":​ 
-[    ​3.412784usb 1-1New USB device foundidVendor=046d, idProduct=c52b +[    4.873488] 0x000000000000-0x000002000000 ​"​qspi-fsbl-uboot"​ 
-[    ​3.419485usb 1-1New USB device stringsMfr=1Product=2, SerialNumber=0 +[    ​4.8799310x000002000000-0x000002020000 : "​qspi-uboot-env"​ 
-[    ​3.426618usb 1-1ProductUSB Receiver +[    4.886199] 0x000002020000-0x000002100000 ​"​qspi-nvmfs"​ 
-[    ​3.430704usb 1-1ManufacturerLogitech +[    ​4.8921150x000002100000-0x000007f00000 ​"​qspi-linux"​ 
-[    ​3.444263inputLogitech USB Receiver as /devices/platform/amba/​ff9d0000.usb0/​fe200000.dwc3/​xhci-hcd.0.auto/usb1/1-1/1-1:1.0/0003:046D:C52B.0001/​input/​input0 +[    ​4.899871] macb ff0e0000.ethernet:​ Not enabling partial store and forward 
-[    ​3.515005hid-generic 0003:046D:C52B.0001input: USB HID v1.11 Keyboard ​[Logitech USB Receiveron usb-xhci-hcd.0.auto-1/input0 +[    ​4.907400] libphy: MACB_mii_bus:​ probed 
-[    ​3.530419inputLogitech USB Receiver as /devices/platform/amba/​ff9d0000.usb0/​fe200000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1:1.1/0003:046D:C52B.0002/input/input1 +[    ​4.913221] macb ff0e0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0e0000 irq 21 (00:e0:22:fe:0b:d6
-[    ​3.602770hid-generic 0003:046D:C52B.0002inputUSB HID v1.11 Mouse [Logitech USB Receiveron usb-xhci-hcd.0.auto-1/input1 +[    ​4.923467xilinx-axipmon ffa00000.perf-monitorProbed Xilinx APM 
-[    ​3.616926hid-generic 0003:046D:C52B.0003device has no listeners, quitting +   ​4.930029xilinx-axipmon fd0b0000.perf-monitorProbed Xilinx APM 
-[    ​4.018649cdns-i2c ff030000.i2ctimeout waiting on completion +[    4.936559] xilinx-axipmon fd490000.perf-monitorProbed Xilinx APM 
-[    ​4.024653pca954x 1-0070probe failed +[    ​4.943067] xilinx-axipmon ffa10000.perf-monitorProbed Xilinx APM 
-[    ​4.028626cdns-i2c ff030000.i2c400 kHz mmio ff030000 irq 17 +[    4.951512] OFgraphno port node found in /​axi/​phy@fd400000 
-[    ​4.078646mmc0SDHCI controller on ff170000.mmc [ff170000.mmcusing ADMA 64-bit +[    5.053782] at24 0-002csupply vcc not found, using dummy regulator 
-[    ​4.092758] adrv9009 spi1.0: ​adrv9009_probe ​enter +[    5.060764] at24 0-002c2048 byte 24c16 EEPROM, writable, 1 bytes/write 
-[    ​4.097840] adrv9009 spi1.1adrv9009_probe ​enter +[    ​5.067510cdns-i2c ff020000.i2c:​ 400 kHz mmio ff020000 irq 23 
-[    ​4.157557axi_adxcvr 84a40000.axi-adxcvr-rx: AXI-ADXCVR-RX (17.01.a) using GTH4 at 0x84A40000 mapped to 0xffffff8009375000. Number of lanes4. +[    5.075102] i2c i2c-1: Added multiplexed i2c bus 3 
-[    ​4.172340axi_adxcvr 84a60000.axi-adxcvr-rx-osAXI-ADXCVR-RX (17.01.a) using GTH4 at 0x84A60000 mapped to 0xffffff800937d000. Number of lanes4. +[    5.569318] i2c i2c-1: Added multiplexed i2c bus 4 
-[    ​4.186326axi_adxcvr 84a20000.axi-adxcvr-tx: AXI-ADXCVR-TX (17.01.a) using GTH4 at 0x84A20000 mapped to 0xffffff8009385000. Number of lanes8. +[    5.574255] i2c i2c-1Added multiplexed i2c bus 5 
-[    ​4.201026xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card:​ ASoC: CPU DAI (null) not registered +[    ​5.579276at24 6-0050: supply vcc not found, using dummy regulator 
-[    ​4.211374macb ff0b0000.ethernetNot enabling partial store and forward +[    5.615141] i2c i2c-1: Added multiplexed i2c bus 6 
-[    ​4.218802libphyMACB_mii_busprobed +[    5.620155] at24 7-0050: supply vcc not found, using dummy regulator 
-[    ​4.235694mmc0new high speed SDHC card at address aaaa +[    5.654316] i2c i2c-1Added multiplexed i2c bus 
-[    ​4.241355mmcblk0mmc0:aaaa SU08G 7.40 GiB  +[    5.659324] at24 8-0050: supply vcc not foundusing dummy regulator 
-[    ​4.246924 ​mmcblk0p1 p2 p3 +[    5.695115] i2c i2c-1: Added multiplexed i2c bus 
-[    ​4.294737macb ff0b0000.ethernet eth1Cadence GEM rev 0x50070106 at 0xff0b0000 irq 13 (da:3c:6d:34:48:50) +[    5.700043] i2c i2c-1: Added multiplexed i2c bus 9 
-[    ​4.304563Marvell 88E1510 ff0e0000.ethernet-ffffffff:01attached PHY driver ​[Marvell 88E1510] (mii_bus:phy_addr=ff0e0000.ethernet-ffffffff:01irq=POLL) +[    ​5.704968i2c i2c-1: Added multiplexed i2c bus 10 
-   4.318901] adrv9009 spi1.0: ​adrv9009_probe ​enter +[    5.709847] pca954x 1-0070: registered 8 multiplexed busses for I2C switch pca9548 
-   4.326803] adrv9009 spi1.0: ​ADIHAL_resetHw at index +[    5.717454] cdns-i2c ff030000.i2c400 kHz mmio ff030000 irq 24 
-   4.799975randomcrng init done +[    ​5.724248cdns-wdt fd4d0000.watchdog: Xilinx Watchdog Timer with timeout 60s 
-[   11.866079] adrv9009 spi1.0: ​TAL_DEFRAMER_A deframerStatus 0x12 +[    5.731852] cpu cpu0dev_pm_opp_set_rate:​ failed to find current OPP for freq 1316666653 (-34) 
-[   11.872090] adrv9009 spi1.0: ​TAL_FRAMER_A framerStatus 0x21 +[    ​5.740593cpufreqcpufreq_online:​ CPU0: Running at unlisted initial frequency: 1316666 KHzchanging to: 1199999 KHz 
-[   11.877752] adrv9009 spi1.0: ​TAL_FRAMER_B framerStatus 0x29 +[    ​5.751385cpu cpu0dev_pm_opp_set_ratefailed to find current OPP for freq 1316666653 (-34) 
-[   11.987596] adrv9009 spi1.0: ​adrv9009_probe: adrv9009-x2 Rev 192Firmware 6.0.2 API version3.6.0.5 successfully initialized +[    5.761590] zynqmp-display fd4a0000.display:​ [drm] Cannot find any crtc or sizes 
-[   11.999161] adrv9009 spi1.1adrv9009_probe ​enter +[    5.771554] axi-i2s 82000000.axi-i2s-adi:​ probedcapture enabledplayback enabled 
-[   12.006907] adrv9009 spi1.1ADIHAL_resetHw at index +[    ​5.779704adrv9009 spi1.0adrv9009_probe ​enter 
-[   12.690647] axi-jesd204-rx 84a50000.axi-jesd204-rxLane 2 desynced (8 errors)restarting link +[    ​5.785338adrv9009 spi1.1adrv9009_probe ​enter 
-[   12.699342] axi-jesd204-rx 84a50000.axi-jesd204-rxLane 3 desynced (12 errors)restarting link +[    5.794144] mmc0: SDHCI controller on ff170000.mmc [ff170000.mmc] using ADMA 64-bit 
-[   12.808150] axi-jesd204-rx 84a70000.axi-jesd204-rxLane 2 desynced (9 errors)restarting link +[    ​5.838432hmc7044 spi1.2PLL1Locked, CLKIN1 @ 30720000 Hz, PFD: 30720 kHz PLL2: Locked @ 2949.120000 MHz 
-[   12.816842] axi-jesd204-rx 84a70000.axi-jesd204-rxLane 3 desynced (631 errors)restarting link +[    5.849324] macb ff0b0000.ethernet:​ Not enabling partial store and forward 
-[   19.576472] adrv9009 spi1.1: ​adrv9009_probe: adrv9009 Rev 192, Firmware 6.0.2 API version: 3.6.0.successfully initialized +[    ​5.859757mmc0new high speed SDHC card at address 0001 
-[   19.599339cf_axi_dds 84a04000.axi-adrv9009-tx-hpcAnalog Devices CF_AXI_DDS_DDS MASTER (9.01.b) at 0x84A04000 mapped to 0xffffff800cb60000,​ probed DDS ADRV9009-X2 +[    5.865588] mmcblk0mmc0:0001 SD16G 14.6 GiB  
-[   19.614346xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_cardASoC: CPU DAI (null) not registered +[    ​5.871588libphy: MACB_mii_bus:​ probed 
-[   19.644911cf_axi_adc 84a00000.axi-adrv9009-rx-hpcADI AIM (10.01.b) at 0x84A00000 mapped to 0xffffff800cb70000probed ADC ADRV9009-X2 as MASTER +[    5.875571] macb ff0b0000.ethernet eth1: Cadence GEM rev 0x50070106 at 0xff0b0000 irq 20 (c6:​bd:​2a:​d9:​e2:​01) 
-[   19.658310xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card:​ ASoCCPU DAI (null) not registered +[    5.887653] ​ mmcblk0: p1 p2 p3 
-[   19.669477] input: gpio_keys as /​devices/​platform/​gpio_keys/​input/​input2 +[    5.891736] axi_adxcvr 84a40000.axi-adxcvr-rxAXI-ADXCVR-RX (17.05.a) using CPLL on GTH4 at 0x84A40000. Number of lanes4. 
-[   19.676324hctosysunable to open rtc device (rtc0) +[    ​5.905263axi_adxcvr 84a60000.axi-adxcvr-rx-os: AXI-ADXCVR-RX (17.05.a) using CPLL on GTH4 at 0x84A60000. Number of lanes4. 
-[   19.682504] ALSA device list: +[    ​5.917738axi_adxcvr 84a20000.axi-adxcvr-tx: AXI-ADXCVR-TX (17.05.a) using QPLL on GTH4 at 0x84A20000. Number of lanes8. 
-[   19.685470]   No soundcards found. +[    ​5.929482axi-jesd204-rx 84a50000.axi-jesd204-rxAXI-JESD204-RX (1.07.a) at 0x84A50000. Encoder 8b10bwidth 4/4, lanes 4, jesd204-fs
-[   19.689366xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card:​ ASoC: CPU DAI (nullnot registered +[    ​5.942407axi-jesd204-rx 84a70000.axi-jesd204-rxAXI-JESD204-RX (1.07.a) at 0x84A70000. Encoder 8b10bwidth 4/4lanes 4, jesd204-fs. 
-[   19.723364] EXT4-fs (mmcblk0p2):​ mounted filesystem with ordered data mode. Opts: (null) +[    ​5.955219axi-jesd204-tx 84a30000.axi-jesd204-txAXI-JESD204-TX (1.06.a) at 0x84A30000. Encoder 8b10bwidth 4/4lanes 8, jesd204-fs. 
-[   19.731468] VFS: Mounted root (ext4 filesystem) on device 179:2. +[    ​5.972920adrv9009 spi1.0adrv9009_probe ​enter 
-[   19.745864] devtmpfs: mounted +[    ​5.983087adrv9009 spi1.1adrv9009_probe ​enter 
-[   19.748945] Freeing unused kernel memory: ​512K +[    6.014044] cf_axi_adc 84a00000.axi-adrv9009-rx-hpc: ADI AIM (10.01.b) at 0x84A00000 mapped to 0x(____ptrval____),​ probed ADC ADRV9009-XR 
-Mount failed for selinuxfs on /sys/fs/selinux No such file or directory +[    ​6.045146cf_axi_dds 84a04000.axi-adrv9009-tx-hpc:​ Analog Devices CF_AXI_DDS_DDS MASTER (9.01.b) at 0x84A04000 mapped to 0x(____ptrval2 
-[   19.954655axi-jesd204-rx 84a50000.axi-jesd204-rxLane desynced ​(50 errors), restarting link +[    ​6.059953jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,jesd204:0,​parent=spi1.0: JESD204[0:​0] transition initialized -> probed 
-[   19.963439axi-jesd204-rx 84a50000.axi-jesd204-rxLane 3 desynced (10 errors)restarting link +[    ​6.071171jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,jesd204:0,​parent=spi1.0: JESD204[0:1] transition initialized -> probed 
-[   20.080717inithwclock main process ​(1789terminated with status ​+[    ​6.082381jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:0,parent=spi1.0:​ JESD204[0:​2] transition initialized -> probed 
-[   20.082654axi-jesd204-rx 84a70000.axi-jesd204-rxLane 2 desynced ​(9 errors), restarting link +[    ​6.093608jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0JESD204[0:​0] transition probed -> idle 
-[   20.082660axi-jesd204-rx 84a70000.axi-jesd204-rxLane 3 desynced ​(9 errors), restarting link +[    ​6.104214jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:0,​parent=spi1.0:​ JESD204[0:​1] transition probed ​-> idle 
-[ OK ]ting up X socket directories...         +[    ​6.114829jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:0,parent=spi1.0: JESD204[0:​2] transition probed -> idle 
- * STARTDISTCC ​is set to false in /etc/default/​distcc +[    ​6.125442jesd204/​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:0,parent=spi1.0: JESD204[0:​0] transition idle -> device_init 
- /usr/bin/distccd not starting +[    ​6.136484jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:0,​parent=spi1.0JESD204[0:​1] transition idle -> device_init 
-[ OK ]rting IIO Daemon ​iiod        ​+[    ​6.147523jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:0,​parent=spi1.0JESD204[0:​2] transition idle -> device_init 
 +[    ​6.158566jesd204: /axi/spi@ff040000/adrv9009-phy@0,​jesd204:​0,​parent=spi1.0: JESD204[0:​0] transition device_init -> link_init 
 +[    6.170044] jesd204: ​/axi/spi@ff040000/adrv9009-phy@0,​jesd204:0,​parent=spi1.0: JESD204[0:1] transition device_init -> link_init 
 +[    ​6.181515jesd204/​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:0,​parent=spi1.0JESD204[0:2transition device_init ​-> link_init 
 +[    6.193005] jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0: JESD204[0:​0] transition link_init ​-> link_supported 
 +[    ​6.204735jesd204: /axi/spi@ff040000/adrv9009-phy@0,​jesd204:​0,​parent=spi1.0: JESD204[0:​1] transition link_init -> link_supported 
 +[    6.216469] jesd204: ​/axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0: JESD204[0:​2] transition link_init -> link_supported 
 +[    6.228926] jesd204: ​/axi/spi@ff040000/adrv9009-phy@0,​jesd204:0,​parent=spi1.0JESD204[0:0] transition link_supported -> link_pre_setup 
 +[    6.241098] jesd204: ​/axi/spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0:​ JESD204[0:​1] transition link_supported -> link_pre_setup 
 +[    ​6.253263jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:0,​parent=spi1.0JESD204[0:​2] transition link_supported -> link_pre_setup 
 +[    6.309896] jesd204/​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:0,​parent=spi1.0: JESD204[0:0transition link_pre_setup ​-> clk_sync_stage1 
 +[    6.322153] jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0: JESD204[0:1] transition link_pre_setup -> clk_sync_stage1 
 +[    ​6.334408jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:0,​parent=spi1.0JESD204[0:​2] transition link_pre_setup -> clk_sync_stage1 
 +[    ​6.356435jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0JESD204[0:​0] transition clk_sync_stage1 -> clk_sync_stage2 
 +[    ​6.368780jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:0,​parent=spi1.0:​ JESD204[0:​1] transition clk_sync_stage1 -> clk_sync_stage2 
 +[    ​6.381121jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0JESD204[0:​2] transition clk_sync_stage1 -> clk_sync_stage2 
 +[    ​6.393546jesd204/​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0: JESD204[0:0transition clk_sync_stage2 ​-> clk_sync_stage3 
 +[    ​6.405887jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0: ​JESD204[0:1] transition clk_sync_stage2 -> clk_sync_stage3 
 +[    ​6.418228jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0JESD204[0:2] transition clk_sync_stage2 -> clk_sync_stage3 
 +[    ​6.430573jesd204: /​fpga-axi@0/​axi-jesd204-rx@84a50000,​jesd204:5,​parent=84a50000.axi-jesd204-rxPossible instantiation for multiple c2 
 +[    ​6.445780jesd204: /​fpga-axi@0/​axi-jesd204-rx@84a70000,​jesd204:7,​parent=84a70000.axi-jesd204-rxPossible instantiation for multiple c2 
 +[    ​6.460988jesd204: /​fpga-axi@0/​axi-jesd204-tx@84a30000,​jesd204:9,​parent=84a30000.axi-jesd204-txPossible instantiation for multiple c4 
 +[    ​6.478205adrv9009 spi1.1ADIHAL_resetHw 
 +[    ​6.807922adrv9009 spi1.0ADIHAL_resetHw 
 +[    ​7.137699jesd204/​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:0,​parent=spi1.0:​ JESD204[0:​0] transition clk_sync_stage3 -> link_setup 
 +[    ​7.149606jesd204/​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0:​ JESD204[0:​1] transition clk_sync_stage3 -> link_setup 
 +[    ​7.161513jesd204/​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:0,​parent=spi1.0: JESD204[0:​2] transition clk_sync_stage3 -> link_setup 
 +[    ​7.173585jesd204/​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0:​ JESD204[0:​0] transition link_setup -> opt_setup_stage1 
 +[    ​7.185576jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0JESD204[0:1] transition link_setup -> opt_setup_stage1 
 +[    7.197571] jesd204/​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:0,​parent=spi1.0JESD204[0:2] transition link_setup -> opt_setup_stage1 
 +[    ​7.302940random: crng init done 
 +[   11.155203] jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:0,​parent=spi1.0JESD204[0:0] transition opt_setup_stage1 -> opt_setup_sta2 
 +[   11.167722] jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:0,parent=spi1.0: JESD204[0:​1] transition opt_setup_stage1 -> opt_setup_sta2 
 +  11.180234jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0: ​JESD204[0:2] transition opt_setup_stage1 -> opt_setup_sta2 
 +  11.192954jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0: ​JESD204[0:​0] transition opt_setup_stage2 -> opt_setup_sta3 
 +  11.205468jesd204/​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0:​ JESD204[0:​1] transition opt_setup_stage2 -> opt_setup_sta3 
 +[   11.217981jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0: ​JESD204[0:​2] transition opt_setup_stage2 -> opt_setup_sta3 
 +[   11.230697jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0: ​JESD204[0:​0] transition opt_setup_stage3 -> opt_setup_sta4 
 +[   11.243215jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0: ​JESD204[0:​1] transition opt_setup_stage3 -> opt_setup_sta4 
 +[   11.255731jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0: ​JESD204[0:2] transition opt_setup_stage3 -> opt_setup_sta4 
 +[   ​16.470043] jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,jesd204:0,​parent=spi1.0JESD204[0:​0] transition opt_setup_stage4 -> opt_setup_sta5 
 +[   16.482562] jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0: JESD204[0:​1] transition opt_setup_stage4 -> opt_setup_sta5 
 +[   16.495075jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0JESD204[0:2] transition opt_setup_stage4 -> opt_setup_sta5 
 +[   16.508137jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0JESD204[0:​0] transition opt_setup_stage5 -> clocks_enable 
 +[   16.520399jesd204: /axi/​spi@ff040000/​adrv9009-phy@0,jesd204:​0,​parent=spi1.0:​ JESD204[0:​1] transition opt_setup_stage5 ​-> clocks_enable 
 +[   16.532650] jesd204: /axi/​spi@ff040000/​adrv9009-phy@0,jesd204:0,parent=spi1.0:​ JESD204[0:​2] transition opt_setup_stage5 -> clocks_enable 
 +[   16.550135jesd204: /axi/​spi@ff040000/​adrv9009-phy@0,jesd204:​0,​parent=spi1.0:​ JESD204[0:​0] transition clocks_enable ​-> link_enable 
 +[   16.561954] jesd204: /axi/​spi@ff040000/​adrv9009-phy@0,jesd204:0,parent=spi1.0:​ JESD204[0:​1] transition clocks_enable -> link_enable 
 +[   16.573775jesd204: /axi/​spi@ff040000/​adrv9009-phy@0,jesd204:​0,​parent=spi1.0:​ JESD204[0:​2] transition clocks_enable ​-> link_enable 
 +[   16.620711] jesd204: /axi/​spi@ff040000/​adrv9009-phy@0,jesd204:0,parent=spi1.0:​ JESD204[0:​0] transition link_enable -> link_running 
 +[   16.632446jesd204: /axi/​spi@ff040000/​adrv9009-phy@0,jesd204:​0,​parent=spi1.0:​ JESD204[0:​1] transition link_enable ​-> link_running 
 +[   16.644179] jesd204: /axi/​spi@ff040000/​adrv9009-phy@0,jesd204:0,parent=spi1.0:​ JESD204[0:​2] transition link_enable -> link_running 
 +[   16.757453] adrv9009 spi1.1: ​adrv9009_info: adrv9009 Rev 192, Firmware 6.2.1 API version: 3.6.2.successfully initialized ​via jesd204-fm 
 +[   16.871422adrv9009 spi1.0: adrv9009_info: ​adrv9009-x2 Rev 192, Firmware 6.2.1 API version3.6.2.1 successfully initialized via jesd20m 
 +[   16.884116jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0JESD204[0:0] transition link_running -> opt_post_running_e 
 +[   16.896803jesd204: /axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:0,parent=spi1.0:​ JESD204[0:​1] transition link_running ​-> opt_post_running_e 
 +[   16.909492jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0JESD204[0:2] transition link_running -> opt_post_running_e 
 +[   16.925576] input: gpio_keys as /​devices/​platform/​gpio_keys/​input/​input0 
 +[   16.932512] of_cfs_init 
 +[   16.934968of_cfs_initOK 
 +[   16.937966] cfg80211: Loading compiled-in X.509 certificates for regulatory database 
 +[   ​17.061586] cfg80211: Loaded X.509 cert '​sforshee:​ 00b28ddf47aef9cea7'​ 
 +[   ​17.068114] clk: Not disabling unused clocks 
 +[   ​17.072633] ALSA device list: 
 +[   17.075591]   #0: ADRV9009 ZU11EG ADAU1761 
 +[   17.079945platform regulatory.0: Direct firmware load for regulatory.db failed with error -
 +[   ​17.088553] cfg80211failed to load regulatory.db 
 +[   ​17.944935] EXT4-fs ​(mmcblk0p2): recovery complete 
 +[   17.953394] EXT4-fs (mmcblk0p2):​ mounted filesystem with ordered data mode. Opts: (null) 
 +[   17.961514] VFS: Mounted root (ext4 filesystem) on device 179:2. 
 +[   17.975849] devtmpfs: mounted 
 +[   17.979570] Freeing unused kernel memory: ​2496K 
 +[   ​17.984188] Run /sbin/init as init process 
 +[   ​18.494456] systemd[1]System time before build time, advancing clock. 
 +[   18.533602systemd[1]: systemd 247.3-7+rpi1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRY) 
 +[   ​18.556807] systemd[1]Detected architecture arm64. 
 + 
 +Welcome to Kuiper GNU/Linux 11.2 (bullseye)
 + 
 +[   ​18.581954] systemd[1]: Set hostname to <​analog>​. 
 +[   19.969929systemd[1]: /​lib/​systemd/​system/​plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disab. 
 +[   ​20.190835] systemd[1]: Queued start job for default target Graphical Interface. 
 +[   ​20.199479] systemd[1]: system-getty.sliceunit configures an IP firewallbut the local system does not support BPF/cgroup firewalling. 
 +[   20.211857] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) 
 +[   ​20.220887] systemd[1]: Created slice system-getty.slice. 
 +[  OK  ] Created slice system-getty.slice. 
 +[   20.240857systemd[1]: Created slice system-modprobe.slice. 
 +[  OK  ] Created slice system-modprobe.slice. 
 +[   ​20.260796] systemd[1]: Created slice system-serial\x2dgetty.slice. 
 +[  OK  ] Created slice system-serial\x2dgetty.slice. 
 +[   ​20.284787] systemd[1]Created slice system-systemd\x2dfsck.slice. 
 +[  OK  ] Created slice system-systemd\x2dfsck.slice. 
 +[   ​20.308673] systemd[1]: Created slice User and Session Slice. 
 +[  OK  ] Created slice User and Session Slice. 
 +[   ​20.328694] systemd[1]: Started Forward Password Requests to Wall Directory Watch. 
 +[  OK  ] Started Forward Password R�…uests to Wall Directory Watch. 
 +[   ​20.352710] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. 
 +[   ​20.365061] systemd[1]: Reached target Slices. 
 +[  OK  ] Reached target Slices. 
 +[   ​20.380579] systemd[1]: Reached target Swap. 
 +[  OK  ] Reached target Swap. 
 +[   ​20.397194] systemd[1]: Listening on Syslog Socket. 
 +[  OK  ] Listening on Syslog Socket. 
 +[   ​20.412791] systemd[1]: Listening on fsck to fsckd communication Socket. 
 +[  OK  ] Listening on fsck to fsckd communication Socket. 
 +[   ​20.436648] systemd[1]: Listening on initctl Compatibility Named Pipe. 
 +[  OK  ] Listening on initctl Compatibility Named Pipe. 
 +[   ​20.461108] systemd[1]: Listening on Journal Audit Socket. 
 +[  OK  ] Listening on Journal Audit Socket. 
 +[   ​20.480793] systemd[1]: Listening on Journal Socket ​(/dev/log)
 +[  OK  ] Listening on Journal Socket (/dev/log). 
 +[   20.504852systemd[1]: Listening on Journal Socket. 
 +[  OK  ] Listening on Journal Socket. 
 +[   ​20.522281] systemd[1]: Listening on udev Control Socket. 
 +[  OK  ] Listening on udev Control Socket. 
 +[   ​20.544788] systemd[1]: Listening on udev Kernel Socket. 
 +[  OK  ] Listening on udev Kernel Socket. 
 +[   ​20.566278] systemd[1]: Mounting Huge Pages File System... 
 +         ​Mounting Huge Pages File System... 
 +[   ​20.582131] systemd[1]: Mounting POSIX Message Queue File System... 
 +         ​Mounting POSIX Message Queue File System... 
 +[   ​20.605935] systemd[1]: Mounting RPC Pipe File System... 
 +         ​Mounting RPC Pipe File System... 
 +[   ​20.622162] systemd[1]: Mounting Kernel Debug File System... 
 +         ​Mounting Kernel Debug File System... 
 +[   ​20.636917] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. 
 +[   ​20.645539] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. 
 +[   ​20.658448] systemd[1]: Starting Restore / save the current clock... 
 +         ​Starting Restore / save the current clock... 
 +[   ​20.687824] systemd[1]: Starting Set the console keyboard layout... 
 +         ​Starting Set the console keyboard layout... 
 +[   ​20.710146] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped. 
 +[   ​20.723451] systemd[1]: Starting Load Kernel Module configfs... 
 +         ​Starting Load Kernel Module configfs... 
 +[   ​20.742522] systemd[1]: Starting Load Kernel Module drm... 
 +         ​Starting Load Kernel Module drm... 
 +[   ​20.762848] systemd[1]: Starting Load Kernel Module fuse... 
 +         ​Starting Load Kernel Module fuse... 
 +[   ​20.788151] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. 
 +[   ​20.797422] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. 
 +[   ​20.808264] systemd[1]: Starting Journal Service... 
 +         ​Starting Journal Service... 
 +[   ​20.829135] systemd[1]: Starting Load Kernel Modules... 
 +         ​Starting Load Kernel Modules... 
 +[   ​20.846420] systemd[1]: Starting Remount Root and Kernel File Systems... 
 +         ​Starting Remount Root and Kernel File Systems... 
 +[   ​20.870354] systemd[1]: Starting Coldplug All udev Devices... 
 +         ​Starting Coldplug All udev Devices... 
 +[   ​20.893271] systemd[1]: Mounted Huge Pages File System. 
 +[  OK  ] Mounted Huge Pages File System. 
 +[   ​20.918303] systemd[1]: Mounted POSIX Message Queue File System. 
 +[  OK  ] Mounted POSIX Message Queue File System. 
 +[   ​20.940989] systemd[1]: Mounted RPC Pipe File System. 
 +[  OK  ] Mounted RPC Pipe File System. 
 +[   ​20.956993] systemd[1]: Mounted Kernel Debug File System. 
 +[  OK  ] Mounted Kernel Debug File System. 
 +[   ​20.977388] systemd[1]: Finished Restore / save the current clock. 
 +[  OK  ] Finished Restore / save the current clock. 
 +[   ​21.001586] systemd[1]: Finished Set the console keyboard layout. 
 +[  OK  ] Finished Set the console keyboard layout. 
 +[   ​21.027051] systemd[1]: Started Journal Service. 
 +[  OK  ] Started Journal Service. 
 +[  OK  ] Finished Load Kernel Module configfs. 
 +[  OK  ] Finished Load Kernel Module drm. 
 +[  OK  ] Finished Load Kernel Module fuse. 
 +[FAILED] Failed to start Load Kernel Modules. 
 +See '​systemctl status systemd-modules-load.service'​ for details. 
 +         ​Mounting FUSE Control File System... 
 +         ​Mounting Kernel Configuration File System... 
 +         ​Starting Apply Kernel Variables... 
 +[  OK  ] Mounted FUSE Control File System. 
 +[  OK  ] Mounted Kernel Configuration File System. 
 +[  OK  ] Finished Apply Kernel Variables. 
 +[  OK  ] Finished Coldplug All udev Devices. 
 +         ​Starting Helper to synchronize boot up for ifupdown... 
 +         ​Starting Wait for udev To �…plete Device Initialization... 
 +[  OK  ] Finished Helper to synchronize boot up for ifupdown. 
 +[  OK  ] Finished Remount Root and Kernel File Systems. 
 +         ​Starting Flush Journal to Persistent Storage... 
 +         ​Starting Load/Save Random Seed... 
 +         ​Starting Create System Users... 
 +[  OK  ] Finished Create System Users. 
 +[  OK  ] Finished Load/Save Random Seed. 
 +         ​Starting Create Static Device Nodes in /dev... 
 +[  OK  ] Finished Create Static Device Nodes in /dev. 
 +[  OK  ] Reached target Local File Systems (Pre). 
 +         ​Starting Rule-based Manage�…for Device Events and Files... 
 +[  OK  ] Finished Flush Journal to Persistent Storage. 
 +[  OK  ] Started Rule-based Manager for Device Events and Files. 
 +         ​Starting Show Plymouth Boot Screen... 
 +[  OK  ] Started Show Plymouth Boot Screen. 
 +[  OK  ] Started Forward Password R�…s to Plymouth Directory Watch. 
 +[  OK  ] Reached target Local Encrypted Volumes. 
 +[  OK  ] Found device /​dev/​ttyPS0. 
 +[  OK  ] Found device /​dev/​disk/​by-partuuid/​ce8c84ab-01. 
 +[  OK  ] Found device /​dev/​ttyS0. 
 +[  OK  ] Reached target Hardware activated USB gadget. 
 +[  OK  ] Listening on Load/Save RF �…itch Status /dev/rfkill Watch. 
 +         ​Starting File System Check�…isk/​by-partuuid/​ce8c84ab-01... 
 +         ​Starting Load Kernel Modules... 
 +[FAILED] Failed to start Load Kernel Modules. 
 +See '​systemctl status systemd-modules-load.service'​ for details. 
 +[  OK  ] Finished Wait for udev To Complete Device Initialization. 
 +[  OK  ] Finished File System Check�…/​disk/​by-partuuid/​ce8c84ab-01. 
 +         ​Mounting /boot... 
 +[  OK  ] Started File System Check Daemon to report status. 
 +         ​Starting Load Kernel Modules... 
 +[  OK  ] Mounted /boot. 
 +[  OK  ] Reached target Local File Systems. 
 +         ​Starting Set console font and keymap... 
 +         ​Starting Preprocess NFS configuration... 
 +         ​Starting Tell Plymouth To Write Out Runtime Data... 
 +         ​Starting Create Volatile Files and Directories... 
 +[  OK  ] Finished Set console font and keymap. 
 +[  OK  ] Finished Preprocess NFS configuration. 
 +[FAILED] Failed to start Load Kernel Modules. 
 +See '​systemctl status systemd-modules-load.service'​ for details. 
 +[  OK  ] Finished Tell Plymouth To Write Out Runtime Data. 
 +         ​Starting Raise network interfaces... 
 +[  OK  ] Reached target NFS client services. 
 +[  OK  ] Reached target Remote File Systems (Pre). 
 +[  OK  ] Reached target Remote File Systems. 
 +[  OK  ] Finished Create Volatile Files and Directories. 
 +         ​Starting Update UTMP about System Boot/​Shutdown... 
 +[  OK  ] Finished Update UTMP about System Boot/​Shutdown. 
 +[  OK  ] Reached target System Initialization. 
 +[  OK  ] Started CUPS Scheduler. 
 +[  OK  ] Started Daily apt download activities. 
 +[  OK  ] Started Daily apt upgrade and clean activities. 
 +[  OK  ] Started Periodic ext4 Onli�…ata Check for All Filesystems. 
 +[  OK  ] Started Discard unused blocks once a week. 
 +[  OK  ] Started Daily rotation of log files. 
 +[  OK  ] Started Daily man-db regeneration. 
 +[  OK  ] Started Daily Cleanup of Temporary Directories. 
 +[  OK  ] Reached target Paths. 
 +[  OK  ] Reached target Timers. 
 +[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. 
 +[  OK  ] Listening on CUPS Scheduler. 
 +[  OK  ] Listening on D-Bus System Message Bus Socket. 
 +[  OK  ] Listening on Erlang Port Mapper Daemon Activation Socket. 
 +[  OK  ] Listening on GPS (Global P�…ioning System) Daemon Sockets. 
 +[  OK  ] Listening on triggerhappy.socket. 
 +[  OK  ] Reached target Sockets. 
 +[  OK  ] Reached target Basic System. 
 +         ​Starting Save/​Restore Sound Card State... 
 +         ​Starting Avahi mDNS/DNS-SD Stack... 
 +[  OK  ] Started Regular background program processing daemon. 
 +[  OK  ] Started D-Bus System Message Bus. 
 +         ​Starting dphys-swapfile - �…unt, and delete a swap file... 
 +         ​Starting Remove Stale Onli�…t4 Metadata Check Snapshots... 
 +         ​Starting Creating IIOD Context Attributes...... 
 +         ​Starting Authorization Manager... 
 +         ​Starting DHCP Client Daemon... 
 +         ​Starting LSBSwitch to on�…nless shift key is pressed)... 
 +         ​Starting LSB: rng-tools ​(Debian variant)... 
 +         ​Starting System Logging Service... 
 +         ​Starting User Login Management... 
 +         ​Starting triggerhappy global hotkey daemon... 
 +         ​Starting Disk Manager... 
 +         ​Starting WPA supplicant... 
 +[  OK  ] Finished Save/​Restore Sound Card State. 
 +[  OK  ] Reached target Sound Card. 
 +[  OK  ] Finished Remove Stale Onli�…ext4 Metadata Check Snapshots. 
 +[  OK  ] Started triggerhappy global hotkey daemon. 
 +[  OK  ] Started DHCP Client Daemon. 
 +[  OK  ] Finished Raise network interfaces. 
 +[  OK  ] Finished dphys-swapfile - �…mountand delete a swap file. 
 + OK  Started LSB: rng-tools (Debian variant). 
 +[  OK  ] Started System Logging Service. 
 +[  OK  ] Started User Login Management
 +[  OK  ] Started Avahi mDNS/DNS-SD Stack. 
 +[  OK  ] Started WPA supplicant. 
 +[  OK  ] Reached target Network. 
 +[  OK  ] Reached target Network ​is Online. 
 +         ​Starting CUPS Scheduler... 
 +[  OK  ] Started Erlang Port Mapper Daemon. 
 +         ​Starting Load USB gadget scheme... 
 +         ​Starting HTTP based time synchronization tool... 
 +         ​Starting Internet superserver... 
 +         ​Starting ​/etc/rc.local Compatibility... 
 +         Starting OpenBSD Secure Shell server... 
 +         ​Starting Permit User Sessions... 
 +[  OK  ] Started Unattended Upgrades Shutdown. 
 +[  OK  ] Started ​/etc/rc.local Compatibility. 
 +[  OK  ] Finished Permit User Sessions. 
 +         ​Starting Light Display Manager... 
 +         ​Starting Hold until boot process finishes up... 
 +[  OK  ] Started Authorization Manager. 
 +         ​Starting Modem Manager... 
 +[  OK  ] Started HTTP based time synchronization tool. 
 +[  OK  ] Started Internet superserver. 
 +[  OK  ] Finished Load USB gadget scheme. 
 +         ​Mounting Mount FunctionFS instance... 
 +[  OK  ] Found device ​/dev/ttyGS0. 
 + OK  Mounted Mount FunctionFS instance. 
 +[  OK  ] Finished Creating IIOD Context Attributes.... 
 +[  OK  ] Started ​IIO Daemon
 +         ​Starting IIO Daemon with USB FFS support... 
 +         ​Stopping IIO Daemon... 
 +[  OK  ] Stopped IIO Daemon. 
 +[  OK  ] Started IIO Daemon with USB FFS support. 
 +         ​Starting Start USB gadget scheme... 
 +[  OK  ] Started OpenBSD Secure Shell server. 
 +[  OK  ] Started LSB: Switch to ond�…(unless shift key is pressed). 
 + 
 +Raspbian GNU/Linux 11 analog ttyPS0
  
-Last login: ​Thu Jan  1 00:00:25 UTC 1970 on tty1 +analog ​login: ​root (automatic login)
-Welcome to Linaro 14.04 (GNU/Linux 4.14.0-12222-g6598c88 aarch64)+
  
- * Documentation: ​ https://​wiki.analog.com/ https://​ez.analog.com/​+Linux analog ​5.10.0-98248-g1bbe32fa5182 #1143 SMP Wed Aug 3 18:38:55 IST 2022 aarch64
  
-New release '​16.04.6 LTS' available. +The programs included with the Debian GNU/Linux system are free software; 
-Run '​do-release-upgrade'​ to upgrade to it.+the exact distribution terms for each program are described in the 
 +individual files in /​usr/​share/​doc/​*/​copyright.
  
-root@analog:​~# ​+Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent 
 +permitted by applicable law. 
 +Last login: Wed Aug 17 12:17:14 BST 2022 on ttyPS0 
 +root@analog:​~#​
 </​code></​WRAP>​ </​code></​WRAP>​
  
resources/eval/user-guides/adrv9009-zu11eg/quick-start-guide.1596808366.txt.gz · Last modified: 07 Aug 2020 15:52 by Michael Hennerich