Differences

This shows you the differences between two versions of the page.

--- resources:eval:user-guides:adar2004-evalz [16 Jul 2020 17:37] – [GENERAL DESCRIPTION] Added related products section Weston Sapia
+++ resources:eval:user-guides:adar2004-evalz [23 Jul 2020 18:39] (current) – [Mutliplier Block Setup] Weston Sapia
@@ Line 133: / Line 133: @@
 |< 100% 15% 15% 40% 15% 15% >|
 ^  LO Input (GHz)  ^  Internal LO (GHz)  ^  Multiplier Band  ^  BPF  ^  MULT_EN_x Register Value  ^
-|  2.50 to 3.00  |  10 to 12  |  Low Band Active //(Mid and High Bands Ready)//  |  LOW  |  0xFA  |
+|  2.40 to 3.00  |  9.6 to 12  |  Low Band Active //(Mid and High Bands Ready)//  |  LOW  |  0xFA  |
 |  3.00 to 4.00  |  12 to 16  |  Low Ban Active //(Mid and High Bands Ready)//d  |  HIGH  |  0x7A  |
 |  4.00 to 5.00  |  16 to 20  |  Mid Band Active //(Low and High Bands Ready)//  |  LOW  |  0xEE  |
 |  5.00 to 6.25  |  20 to 25  |  Mid Band Active //(Low and High Bands Ready)//  |  HIGH  |  0x6E  |
 |  6.25 to 8.00  |  25 to 32  |  High Band Active //(Low and Mid Bands Ready)//  |  LOW  |  0xEB  |
-|  8.00 to 10.00  |  32 to 40  |  High Band Active //(Low and Mid Bands Ready)//  |  HIGH  |  0x6B  |
+|  8.00 to 10.10  |  32 to 40.4  |  High Band Active //(Low and Mid Bands Ready)//  |  HIGH  |  0x6B  |
 Follow the below steps to configure the Multiplier block for an LO signal of 4.75GHz (mixer LO signal of 19GHz):

Wiki