Wiki

Analog Devices Wiki

English
English
简体中文
简体中文
日本語
日本語
Руccкий
Руccкий

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
resources:eval:user-guides:adar2004-evalz [15 Jul 2020 17:29] – [Mutliplier Block Setup] Weston Sapiaresources:eval:user-guides:adar2004-evalz [23 Jul 2020 18:39] (current) – [Mutliplier Block Setup] Weston Sapia
Line 16: Line 16:
 <WRAP centeralign>**//Figure 1: ADAR2004-EVALZ Board//**</WRAP> <WRAP centeralign>**//Figure 1: ADAR2004-EVALZ Board//**</WRAP>
 \\ \\  \\ \\ 
 +----
 +====== RELATED PARTS ======
 +=== ADAR2001: 4-Channel 4x Frequency Multiplier/Filter ===
 +  * [[adi>adar2001|ADAR2001 Product page]]
 +  * [[/resources/eval/user-guides/adar2001-evalz|ADAR2001-EVALZ Wiki]]
 +=== AD9083: 16-Channel, 100MHz Bandwidth, JESD204B Analog-to-Digital Converter ===
 +  * [[adi>ad9083|AD9083 Product page]]
 +=== ADF5610: Microwave Wideband Synthesizer with Integrated VCO ===
 +  * [[adi>adf5610|ADF5610 Product page]]
 +
 ---- ----
 ====== REQUIREMENTS ====== ====== REQUIREMENTS ======
Line 123: Line 133:
 |< 100% 15% 15% 40% 15% 15% >| |< 100% 15% 15% 40% 15% 15% >|
 ^  LO Input (GHz)  ^  Internal LO (GHz)  ^  Multiplier Band  ^  BPF  ^  MULT_EN_x Register Value  ^ ^  LO Input (GHz)  ^  Internal LO (GHz)  ^  Multiplier Band  ^  BPF  ^  MULT_EN_x Register Value  ^
-|  2.50 to 3.00  |  10 to 12  |  Low Band Active //(Mid and High Bands Ready)//  |  LOW  |  0xFA  |+|  2.40 to 3.00  |  9.6 to 12  |  Low Band Active //(Mid and High Bands Ready)//  |  LOW  |  0xFA  |
 |  3.00 to 4.00  |  12 to 16  |  Low Ban Active //(Mid and High Bands Ready)//d  |  HIGH  |  0x7A  | |  3.00 to 4.00  |  12 to 16  |  Low Ban Active //(Mid and High Bands Ready)//d  |  HIGH  |  0x7A  |
 |  4.00 to 5.00  |  16 to 20  |  Mid Band Active //(Low and High Bands Ready)//  |  LOW  |  0xEE  | |  4.00 to 5.00  |  16 to 20  |  Mid Band Active //(Low and High Bands Ready)//  |  LOW  |  0xEE  |
 |  5.00 to 6.25  |  20 to 25  |  Mid Band Active //(Low and High Bands Ready)//  |  HIGH  |  0x6E  | |  5.00 to 6.25  |  20 to 25  |  Mid Band Active //(Low and High Bands Ready)//  |  HIGH  |  0x6E  |
 |  6.25 to 8.00  |  25 to 32  |  High Band Active //(Low and Mid Bands Ready)//  |  LOW  |  0xEB  | |  6.25 to 8.00  |  25 to 32  |  High Band Active //(Low and Mid Bands Ready)//  |  LOW  |  0xEB  |
-|  8.00 to 10.00  |  32 to 40  |  High Band Active //(Low and Mid Bands Ready)//  |  HIGH  |  0x6B  |+|  8.00 to 10.10  |  32 to 40.4  |  High Band Active //(Low and Mid Bands Ready)//  |  HIGH  |  0x6B  |
  
 Follow the below steps to configure the Multiplier block for an LO signal of 4.75GHz (mixer LO signal of 19GHz): Follow the below steps to configure the Multiplier block for an LO signal of 4.75GHz (mixer LO signal of 19GHz):
resources/eval/user-guides/adar2004-evalz.txt · Last modified: 23 Jul 2020 18:39 by Weston Sapia

Page Tools