Differences

This shows you the differences between two versions of the page.

--- resources:eval:user-guides:ad-fmcomms3-ebz:hardware:configuration_options [08 Jan 2015 00:25] – add some external frequency stuff Robin Getz
+++ resources:eval:user-guides:ad-fmcomms3-ebz:hardware:configuration_options [19 Jan 2018 10:26] (current) – rename xcomm_zynq -> master Alexandru Ardelean
@@ Line 7: / Line 7: @@
 The AD-FMCOMMS2-EBZ and AD-FMCOMMS3-EBZ are both clocked from a 40.000000 MHz Epson crystal. If you want to run from a external source, you need to remove Y101, populate C113 (0.1uF Cap), and provide a low jitter clock source into J105 (SMA connector). If you provide anything but a 40.000000 MHz input, you are required to change the ''clock-frequency'' setting in the device tree.
-<source /arch/arm/boot/dts/adi-fmcomms2.dtsi:clocks{} c linux/xcomm_zynq>
+<source /arch/arm/boot/dts/adi-fmcomms2.dtsi:clocks{} c linux/master>
 To change the frequency follow [[[[/resources/eval/user-guides/ad-fmcomms2-ebz/software/linux/zynq_2014r2#build_the_devicetree_fcmomms2345|this guide]] on how to build the devicetree binary file (make sure you modify the ''clock-frequency'' attribute first.

Wiki