This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
resources:eval:user-guides:ad-fmcdaq2-ebz:quickstart:zynq [05 Jan 2015 20:45] – add rev Robin Getz | resources:eval:user-guides:ad-fmcdaq2-ebz:quickstart:zynq [30 Jan 2023 01:07] (current) – Joyce Velasco | ||
---|---|---|---|
Line 9: | Line 9: | ||
* You need a Host PC (Windows or Linux). | * You need a Host PC (Windows or Linux). | ||
* You need a SD card writer connected to above PC (Supported USB SD readers/ | * You need a SD card writer connected to above PC (Supported USB SD readers/ | ||
- | * USB keyboard/ | + | * USB to UART cable |
- | * HDMI Display (monitor or TV) (FULL HD only!) | + | * [Optional] |
+ | * [Optional] | ||
===== Creating / Configuring the SD Card ===== | ===== Creating / Configuring the SD Card ===== | ||
- | [[resources/tools-software/linux-software/ | + | [[:resources:tools-software:linux-software: |
{{page> | {{page> | ||
Line 32: | Line 33: | ||
- Wait ~30 seconds for the " | - Wait ~30 seconds for the " | ||
- Wait another ~30 seconds for the HDMI display device to start showing signs of life. | - Wait another ~30 seconds for the HDMI display device to start showing signs of life. | ||
- | | + | |
- | ===== Booting the SD Card ===== | + | Alternatively, |
- | - ignore your PC, and now interact on the USB mouse/ | + | <hidden **Boot Log** (Click to expand)> |
- | - You should see two screens: | + | < |
- | - IIO Scope tool: \\ {{ : | + | U-Boot 2018.01-21439-gd244ce5 (Jul 29 2021 - 16:31:12 +0100) Xilinx Zynq ZC706, Build: jenkins-development-build_uboot-1 |
- | - Learn more about the [[:resources: | + | |
- | | + | |
- | <WRAP important round> | + | Model: Zynq ZC706 Development Board |
+ | Board: Xilinx Zynq | ||
+ | Silicon: v3.1 | ||
+ | I2C: | ||
+ | DRAM: ECC disabled 1 GiB | ||
+ | MMC: | ||
+ | SF: Detected s25fl128s_64k with page size 512 Bytes, erase size 128 KiB, total 32 MiB | ||
+ | *** Warning | ||
- | '' | + | In: serial@e0001000 |
+ | Out: | ||
+ | Err: | ||
+ | Net: ZYNQ GEM: e000b000, phyaddr 7, interface rgmii-id | ||
+ | eth0: ethernet@e000b000 | ||
+ | reading uEnv.txt | ||
+ | 407 bytes read in 12 ms (32.2 KiB/s) | ||
+ | Importing environment from SD ... | ||
+ | Hit any key to stop autoboot: | ||
+ | Device: sdhci@e0100000 | ||
+ | Manufacturer ID: 3 | ||
+ | OEM: 5344 | ||
+ | Name: SL16G | ||
+ | Tran Speed: 50000000 | ||
+ | Rd Block Len: 512 | ||
+ | SD version 3.0 | ||
+ | High Capacity: Yes | ||
+ | Capacity: 14.8 GiB | ||
+ | Bus Width: 4-bit | ||
+ | Erase Group Size: 512 Bytes | ||
+ | reading uEnv.txt | ||
+ | 407 bytes read in 11 ms (36.1 KiB/s) | ||
+ | Loaded environment from uEnv.txt | ||
+ | Importing environment from SD ... | ||
+ | Running uenvcmd ... | ||
+ | Copying Linux from SD to RAM... | ||
+ | reading uImage | ||
+ | 7486816 bytes read in 432 ms (16.5 MiB/s) | ||
+ | reading devicetree.dtb | ||
+ | 26702 bytes read in 26 ms (1002.9 KiB/s) | ||
+ | ** Unable to read file uramdisk.image.gz ** | ||
+ | ## Booting kernel from Legacy Image at 03000000 ... | ||
+ | Image Name: | ||
+ | Image Type: ARM Linux Kernel Image (uncompressed) | ||
+ | Data Size: 7486752 Bytes = 7.1 MiB | ||
+ | Load Address: 00008000 | ||
+ | Entry Point: | ||
+ | | ||
+ | ## Flattened Device Tree blob at 02a00000 | ||
+ | | ||
+ | | ||
+ | | ||
+ | |||
+ | Starting kernel ... | ||
+ | |||
+ | Booting Linux on physical CPU 0x0 | ||
+ | Linux version 5.10.0-98156-g6b62b86d3dc7 (jenkins@romlxbuild1.adlk.analog.com) (arm-xilinx-linux-gnueabi-gcc.real (GCC) 10.2.0, GNU ld (GNU Binutils) 2.35.0.20200730) #6086 SMP PREEMPT Thu Apr 14 06:51:49 IST 2022 | ||
+ | CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d | ||
+ | CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | ||
+ | OF: fdt: Machine model: Xilinx Zynq ZC706 | ||
+ | OF: fdt: earlycon: stdout-path / | ||
+ | Memory policy: Data cache writealloc | ||
+ | cma: Reserved 128 MiB at 0x38000000 | ||
+ | Zone ranges: | ||
+ | Normal | ||
+ | HighMem | ||
+ | Movable zone start for each node | ||
+ | Early memory node ranges | ||
+ | node 0: [mem 0x0000000000000000-0x000000003fffffff] | ||
+ | Initmem setup node 0 [mem 0x0000000000000000-0x000000003fffffff] | ||
+ | percpu: Embedded 15 pages/cpu s29900 r8192 d23348 u61440 | ||
+ | Built 1 zonelists, mobility grouping on. Total pages: 260608 | ||
+ | Kernel command line: console=ttyPS0, | ||
+ | Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) | ||
+ | Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) | ||
+ | mem auto-init: stack:off, heap alloc:off, heap free:off | ||
+ | Memory: 886148K/ | ||
+ | rcu: Preemptible hierarchical RCU implementation. | ||
+ | rcu: RCU event tracing is enabled. | ||
+ | rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. | ||
+ | Trampoline variant of Tasks RCU enabled. | ||
+ | rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. | ||
+ | rcu: Adjusting geometry for rcu_fanout_leaf=16, | ||
+ | NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 | ||
+ | efuse mapped to (ptrval) | ||
+ | slcr mapped to (ptrval) | ||
+ | L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 | ||
+ | L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 | ||
+ | L2C-310 erratum 769419 enabled | ||
+ | L2C-310 enabling early BRESP for Cortex-A9 | ||
+ | L2C-310 full line of zeros enabled for Cortex-A9 | ||
+ | L2C-310 ID prefetch enabled, offset 1 lines | ||
+ | L2C-310 dynamic clock gating enabled, standby mode enabled | ||
+ | L2C-310 cache controller enabled, 8 ways, 512 kB | ||
+ | L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 | ||
+ | random: get_random_bytes called from start_kernel+0x33c/ | ||
+ | zynq_clock_init: | ||
+ | Zynq clock init | ||
+ | sched_clock: | ||
+ | clocksource: | ||
+ | Switching to timer-based delay loop, resolution 3ns | ||
+ | clocksource: | ||
+ | timer #0 at (ptrval), irq=25 | ||
+ | Console: colour dummy device 80x30 | ||
+ | Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) | ||
+ | pid_max: default: 32768 minimum: 301 | ||
+ | Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) | ||
+ | Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) | ||
+ | CPU: Testing write buffer coherency: ok | ||
+ | CPU0: Spectre v2: using BPIALL workaround | ||
+ | CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | ||
+ | Setting up static identity map for 0x100000 - 0x100060 | ||
+ | rcu: Hierarchical SRCU implementation. | ||
+ | smp: Bringing up secondary CPUs ... | ||
+ | CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | ||
+ | CPU1: Spectre v2: using BPIALL workaround | ||
+ | smp: Brought up 1 node, 2 CPUs | ||
+ | SMP: Total of 2 processors activated (1333.33 BogoMIPS). | ||
+ | CPU: All CPU(s) started in SVC mode. | ||
+ | devtmpfs: initialized | ||
+ | VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 | ||
+ | clocksource: | ||
+ | futex hash table entries: 512 (order: 3, 32768 bytes, linear) | ||
+ | pinctrl core: initialized pinctrl subsystem | ||
+ | NET: Registered protocol family 16 | ||
+ | DMA: preallocated 256 KiB pool for atomic coherent allocations | ||
+ | thermal_sys: | ||
+ | hw-breakpoint: | ||
+ | hw-breakpoint: | ||
+ | zynq-ocm f800c000.ocmc: | ||
+ | e0001000.serial: | ||
+ | printk: console [ttyPS0] enabled | ||
+ | SCSI subsystem initialized | ||
+ | usbcore: registered new interface driver usbfs | ||
+ | usbcore: registered new interface driver hub | ||
+ | usbcore: registered new device driver usb | ||
+ | mc: Linux media interface: v0.10 | ||
+ | videodev: Linux video capture interface: v2.00 | ||
+ | jesd204: created con: id=0, topo=0, link=0, / | ||
+ | jesd204: created con: id=1, topo=0, link=0, / | ||
+ | jesd204: created con: id=2, topo=1, link=0, / | ||
+ | jesd204: created con: id=3, topo=1, link=0, / | ||
+ | jesd204: created con: id=4, topo=0, link=0, / | ||
+ | jesd204: created con: id=5, topo=1, link=0, / | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | jesd204: found 8 devices and 2 topologies | ||
+ | FPGA manager framework | ||
+ | Advanced Linux Sound Architecture Driver Initialized. | ||
+ | clocksource: | ||
+ | NET: Registered protocol family 2 | ||
+ | tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) | ||
+ | TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) | ||
+ | TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) | ||
+ | TCP: Hash tables configured (established 8192 bind 8192) | ||
+ | UDP hash table entries: 512 (order: 2, 16384 bytes, linear) | ||
+ | UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) | ||
+ | NET: Registered protocol family 1 | ||
+ | RPC: Registered named UNIX socket transport module. | ||
+ | RPC: Registered udp transport module. | ||
+ | RPC: Registered tcp transport module. | ||
+ | RPC: Registered tcp NFSv4.1 backchannel transport module. | ||
+ | hw perfevents: no interrupt-affinity property for / | ||
+ | hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available | ||
+ | workingset: timestamp_bits=30 max_order=18 bucket_order=0 | ||
+ | NFS: Registering the id_resolver key type | ||
+ | Key type id_resolver registered | ||
+ | Key type id_legacy registered | ||
+ | nfs4filelayout_init: | ||
+ | fuse: init (API version 7.32) | ||
+ | bounce: pool size: 64 pages | ||
+ | io scheduler mq-deadline registered | ||
+ | io scheduler kyber registered | ||
+ | zynq-pinctrl 700.pinctrl: | ||
+ | dma-pl330 f8003000.dmac: | ||
+ | dma-pl330 f8003000.dmac: | ||
+ | brd: module loaded | ||
+ | loop: module loaded | ||
+ | Registered mathworks_ip class | ||
+ | spi-nor spi1.0: found s25fl128s1, expected n25q128a11 | ||
+ | random: fast init done | ||
+ | spi-nor spi1.0: trying to lock already unlocked area | ||
+ | spi-nor spi1.0: s25fl128s1 (32768 Kbytes) | ||
+ | 5 fixed-partitions partitions found on MTD device spi1.0 | ||
+ | Creating 5 MTD partitions on " | ||
+ | 0x000000000000-0x000000500000 : " | ||
+ | 0x000000500000-0x000000520000 : " | ||
+ | 0x000000520000-0x000000540000 : " | ||
+ | 0x000000540000-0x000000fc0000 : " | ||
+ | 0x000000fc0000-0x000002000000 : " | ||
+ | MACsec IEEE 802.1AE | ||
+ | libphy: Fixed MDIO Bus: probed | ||
+ | tun: Universal TUN/TAP device driver, 1.6 | ||
+ | libphy: MACB_mii_bus: | ||
+ | macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 36 (00: | ||
+ | usbcore: registered new interface driver asix | ||
+ | usbcore: registered new interface driver ax88179_178a | ||
+ | usbcore: registered new interface driver cdc_ether | ||
+ | usbcore: registered new interface driver net1080 | ||
+ | usbcore: registered new interface driver cdc_subset | ||
+ | usbcore: registered new interface driver zaurus | ||
+ | usbcore: registered new interface driver cdc_ncm | ||
+ | ehci_hcd: USB 2.0 ' | ||
+ | usbcore: registered new interface driver uas | ||
+ | usbcore: registered new interface driver usb-storage | ||
+ | usbcore: registered new interface driver usbserial_generic | ||
+ | usbserial: USB Serial support registered for generic | ||
+ | usbcore: registered new interface driver ftdi_sio | ||
+ | usbserial: USB Serial support registered for FTDI USB Serial Device | ||
+ | usbcore: registered new interface driver upd78f0730 | ||
+ | usbserial: USB Serial support registered for upd78f0730 | ||
+ | ULPI transceiver vendor/ | ||
+ | Found SMSC USB3320 ULPI transceiver. | ||
+ | ULPI integrity check: passed. | ||
+ | ci_hdrc ci_hdrc.0: EHCI Host Controller | ||
+ | ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 | ||
+ | ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 | ||
+ | usb usb1: New USB device found, idVendor=1d6b, | ||
+ | usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | ||
+ | usb usb1: Product: EHCI Host Controller | ||
+ | usb usb1: Manufacturer: | ||
+ | usb usb1: SerialNumber: | ||
+ | hub 1-0:1.0: USB hub found | ||
+ | hub 1-0:1.0: 1 port detected | ||
+ | i2c /dev entries driver | ||
+ | si570 1-005d: registered, current frequency 156250000 Hz | ||
+ | i2c i2c-0: Added multiplexed i2c bus 1 | ||
+ | adv7511 2-0039: supply avdd not found, using dummy regulator | ||
+ | adv7511 2-0039: supply dvdd not found, using dummy regulator | ||
+ | adv7511 2-0039: supply pvdd not found, using dummy regulator | ||
+ | adv7511 2-0039: supply bgvdd not found, using dummy regulator | ||
+ | adv7511 2-0039: supply dvdd-3v not found, using dummy regulator | ||
+ | i2c i2c-0: Added multiplexed i2c bus 2 | ||
+ | at24 3-0054: supply vcc not found, using dummy regulator | ||
+ | at24 3-0054: 1024 byte 24c08 EEPROM, writable, 1 bytes/ | ||
+ | i2c i2c-0: Added multiplexed i2c bus 3 | ||
+ | pca953x 4-0021: supply vcc not found, using dummy regulator | ||
+ | pca953x 4-0021: using no AI | ||
+ | i2c i2c-0: Added multiplexed i2c bus 4 | ||
+ | rtc rtc0: invalid alarm value: 2022-05-10T20: | ||
+ | rtc-pcf8563 5-0051: registered as rtc0 | ||
+ | rtc-pcf8563 5-0051: setting system clock to 2022-05-06T13: | ||
+ | i2c i2c-0: Added multiplexed i2c bus 5 | ||
+ | at24 6-0050: supply vcc not found, using dummy regulator | ||
+ | at24 6-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/ | ||
+ | i2c i2c-0: Added multiplexed i2c bus 6 | ||
+ | i2c i2c-0: Added multiplexed i2c bus 7 | ||
+ | i2c i2c-0: Added multiplexed i2c bus 8 | ||
+ | pca954x 0-0074: registered 8 multiplexed busses for I2C switch pca9548 | ||
+ | usbcore: registered new interface driver uvcvideo | ||
+ | USB Video Class driver (1.1.1) | ||
+ | gspca_main: v2.14.0 registered | ||
+ | cdns-wdt f8005000.watchdog: | ||
+ | Xilinx Zynq CpuIdle Driver started | ||
+ | failed to register cpuidle driver | ||
+ | sdhci: Secure Digital Host Controller Interface driver | ||
+ | sdhci: Copyright(c) Pierre Ossman | ||
+ | sdhci-pltfm: | ||
+ | ledtrig-cpu: | ||
+ | hid: raw HID events driver (C) Jiri Kosina | ||
+ | usbcore: registered new interface driver usbhid | ||
+ | usbhid: USB HID core driver | ||
+ | mmc0: SDHCI controller on e0100000.mmc [e0100000.mmc] using ADMA | ||
+ | ad9523 spi0.0: supply vcc not found, using dummy regulator | ||
+ | mmc0: new high speed SDHC card at address aaaa | ||
+ | mmcblk0: mmc0:aaaa SL16G 14.8 GiB | ||
+ | | ||
+ | axi_adxcvr 44a50000.axi-adxcvr-rx: | ||
+ | axi_adxcvr 44a50000.axi-adxcvr-rx: | ||
+ | axi_adxcvr 44a60000.axi-adxcvr-tx: | ||
+ | axi-jesd204-rx 44aa0000.axi-jesd204-rx: | ||
+ | axi-jesd204-tx 44a90000.axi-jesd204-tx: | ||
+ | axi_sysid 45000000.axi-sysid-0: | ||
+ | axi_sysid 45000000.axi-sysid-0: | ||
+ | DAC_OFFLOAD_TYPE=0] on [zc706] git branch < | ||
+ | fpga_manager fpga0: Xilinx Zynq FPGA Manager registered | ||
+ | usbcore: registered new interface driver snd-usb-audio | ||
+ | NET: Registered protocol family 10 | ||
+ | Segment Routing with IPv6 | ||
+ | sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver | ||
+ | NET: Registered protocol family 17 | ||
+ | NET: Registered protocol family 36 | ||
+ | Key type dns_resolver registered | ||
+ | Registering SWP/SWPB emulation handler | ||
+ | of-fpga-region fpga-full: FPGA Region probed | ||
+ | [drm] Initialized axi_hdmi_drm 1.0.0 20120930 for 70e00000.axi_hdmi on minor 0 | ||
+ | axi-hdmi 70e00000.axi_hdmi: | ||
+ | ad9208 spi0.2: ad9680 PLL LOCKED | ||
+ | ad9208 spi0.2: ad9680 Rev. 2 Grade 10 (API 1.0.1) probed | ||
+ | cf_axi_dds 44a04000.axi-ad9144-hpc: | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | ad9144 spi0.1: Link0 code grp sync: f | ||
+ | ad9144 spi0.1: Link0 frame sync stat: f | ||
+ | ad9144 spi0.1: Link0 good checksum stat: f | ||
+ | ad9144 spi0.1: Link0 init lane_sync stat: f | ||
+ | ad9144 spi0.1: Link0 4 lanes @ 10000000 kBps | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | cf_axi_adc 44a10000.axi-ad9680-hpc: | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | jesd204: / | ||
+ | input: gpio_keys as / | ||
+ | of_cfs_init | ||
+ | of_cfs_init: | ||
+ | clk: Not disabling unused clocks | ||
+ | ALSA device list: | ||
+ | #0: HDMI monitor | ||
+ | EXT4-fs (mmcblk0p2): | ||
+ | VFS: Mounted root (ext4 filesystem) on device 179:2. | ||
+ | devtmpfs: mounted | ||
+ | Freeing unused kernel memory: 1024K | ||
+ | Run /sbin/init as init process | ||
+ | systemd[1]: systemd 247.3-7+rpi1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) | ||
+ | systemd[1]: Detected architecture arm. | ||
+ | |||
+ | Welcome to Kuiper GNU/Linux 11.2 (bullseye)! | ||
+ | |||
+ | systemd[1]: Set hostname to < | ||
+ | random: crng init done | ||
+ | systemd[1]: / | ||
+ | systemd[1]: Queued start job for default target Graphical Interface. | ||
+ | systemd[1]: system-getty.slice: | ||
+ | systemd[1]: (This warning is only shown for the first unit using IP firewalling.) | ||
+ | systemd[1]: Created slice system-getty.slice. | ||
+ | [ OK ] Created slice system-getty.slice. | ||
+ | systemd[1]: Created slice system-modprobe.slice. | ||
+ | [ OK ] Created slice system-modprobe.slice. | ||
+ | systemd[1]: Created slice system-serial\x2dgetty.slice. | ||
+ | [ OK ] Created slice system-serial\x2dgetty.slice. | ||
+ | systemd[1]: Created slice system-systemd\x2dfsck.slice. | ||
+ | [ OK ] Created slice system-systemd\x2dfsck.slice. | ||
+ | systemd[1]: Created slice User and Session Slice. | ||
+ | [ OK ] Created slice User and Session Slice. | ||
+ | systemd[1]: Started Forward Password Requests to Wall Directory Watch. | ||
+ | [ OK ] Started Forward Password R…uests to Wall Directory Watch. | ||
+ | systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. | ||
+ | systemd[1]: Reached target Slices. | ||
+ | [ OK ] Reached target Slices. | ||
+ | systemd[1]: Reached target Swap. | ||
+ | [ OK ] Reached target Swap. | ||
+ | systemd[1]: Listening on Syslog Socket. | ||
+ | [ OK ] Listening on Syslog Socket. | ||
+ | systemd[1]: Listening on fsck to fsckd communication Socket. | ||
+ | [ OK ] Listening on fsck to fsckd communication Socket. | ||
+ | systemd[1]: Listening on initctl Compatibility Named Pipe. | ||
+ | [ OK ] Listening on initctl Compatibility Named Pipe. | ||
+ | systemd[1]: Condition check resulted in Journal Audit Socket being skipped. | ||
+ | systemd[1]: Listening on Journal Socket (/ | ||
+ | [ OK ] Listening on Journal Socket (/ | ||
+ | systemd[1]: Listening on Journal Socket. | ||
+ | [ OK ] Listening on Journal Socket. | ||
+ | systemd[1]: Listening on udev Control Socket. | ||
+ | [ OK ] Listening on udev Control Socket. | ||
+ | systemd[1]: Listening on udev Kernel Socket. | ||
+ | [ OK ] Listening on udev Kernel Socket. | ||
+ | systemd[1]: Condition check resulted in Huge Pages File System being skipped. | ||
+ | systemd[1]: Condition check resulted in POSIX Message Queue File System being skipped. | ||
+ | systemd[1]: Mounting RPC Pipe File System... | ||
+ | | ||
+ | systemd[1]: Mounting Kernel Debug File System... | ||
+ | | ||
+ | systemd[1]: Condition check resulted in Kernel Trace File System being skipped. | ||
+ | systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. | ||
+ | systemd[1]: Starting Restore / save the current clock... | ||
+ | | ||
+ | systemd[1]: Starting Set the console keyboard layout... | ||
+ | | ||
+ | systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped. | ||
+ | systemd[1]: Starting Load Kernel Module configfs... | ||
+ | | ||
+ | systemd[1]: Starting Load Kernel Module drm... | ||
+ | | ||
+ | systemd[1]: Starting Load Kernel Module fuse... | ||
+ | | ||
+ | systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. | ||
+ | systemd[1]: Condition check resulted in File System Check on Root Device being skipped. | ||
+ | systemd[1]: Starting Journal Service... | ||
+ | | ||
+ | systemd[1]: Starting Load Kernel Modules... | ||
+ | | ||
+ | systemd[1]: Starting Remount Root and Kernel File Systems... | ||
+ | | ||
+ | systemd[1]: Starting Coldplug All udev Devices... | ||
+ | | ||
+ | systemd[1]: Mounted RPC Pipe File System. | ||
+ | [ OK ] Mounted RPC Pipe File System. | ||
+ | systemd[1]: Mounted Kernel Debug File System. | ||
+ | [ OK ] Mounted Kernel Debug File System. | ||
+ | systemd[1]: Finished Restore / save the current clock. | ||
+ | [ OK ] Finished Restore / save the current clock. | ||
+ | systemd[1]: modprobe@configfs.service: | ||
+ | systemd[1]: Finished Load Kernel Module configfs. | ||
+ | [ OK ] Finished Load Kernel Module configfs. | ||
+ | systemd[1]: modprobe@drm.service: | ||
+ | systemd[1]: Finished Load Kernel Module drm. | ||
+ | [ OK ] Finished Load Kernel Module drm. | ||
+ | systemd[1]: modprobe@fuse.service: | ||
+ | systemd[1]: Finished Load Kernel Module fuse. | ||
+ | [ OK ] Finished Load Kernel Module fuse. | ||
+ | systemd[1]: systemd-modules-load.service: | ||
+ | systemd[1]: systemd-modules-load.service: | ||
+ | systemd[1]: Failed to start Load Kernel Modules. | ||
+ | [FAILED] Failed to start Load Kernel Modules. | ||
+ | See ' | ||
+ | systemd[1]: Mounting FUSE Control File System... | ||
+ | | ||
+ | systemd[1]: Mounting Kernel Configuration File System... | ||
+ | EXT4-fs (mmcblk0p2): | ||
+ | | ||
+ | systemd[1]: Starting Apply Kernel Variables... | ||
+ | | ||
+ | systemd[1]: Finished Remount Root and Kernel File Systems. | ||
+ | [ OK ] Finished Remount Root and Kernel File Systems. | ||
+ | [ OK ] Finished Set the console keyboard layout. | ||
+ | [ OK ] Mounted FUSE Control File System. | ||
+ | [ OK ] Started Journal Service. | ||
+ | [ OK ] Mounted Kernel Configuration File System. | ||
+ | [ OK ] Finished Apply Kernel Variables. | ||
+ | | ||
+ | | ||
+ | | ||
+ | [ OK ] Finished Create System Users. | ||
+ | | ||
+ | [ OK ] Finished Coldplug All udev Devices. | ||
+ | | ||
+ | | ||
+ | [ OK ] Finished Load/Save Random Seed. | ||
+ | [ OK ] Finished Helper to synchronize boot up for ifupdown. | ||
+ | [ OK ] Finished Create Static Device Nodes in /dev. | ||
+ | [ OK ] Reached target Local File Systems (Pre). | ||
+ | | ||
+ | [ OK ] Finished Flush Journal to Persistent Storage. | ||
+ | [ OK ] Started Rule-based Manager for Device Events and Files. | ||
+ | | ||
+ | [ OK ] Started Show Plymouth Boot Screen. | ||
+ | [ OK ] Started Forward Password R…s to Plymouth Directory Watch. | ||
+ | [ OK ] Reached target Local Encrypted Volumes. | ||
+ | [ OK ] Found device / | ||
+ | [ OK ] Found device / | ||
+ | | ||
+ | | ||
+ | [ OK ] Finished Wait for udev To Complete Device Initialization. | ||
+ | [ OK ] Started File System Check Daemon to report status. | ||
+ | [FAILED] Failed to start Load Kernel Modules. | ||
+ | See ' | ||
+ | [ OK ] Finished File System Check…/ | ||
+ | | ||
+ | [ OK ] Mounted /boot. | ||
+ | [ OK ] Reached target Local File Systems. | ||
+ | | ||
+ | | ||
+ | | ||
+ | | ||
+ | | ||
+ | [ OK ] Finished Set console font and keymap. | ||
+ | [ OK ] Finished Tell Plymouth To Write Out Runtime Data. | ||
+ | [ OK ] Finished Preprocess NFS configuration. | ||
+ | [ OK ] Reached target NFS client services. | ||
+ | [ OK ] Reached target Remote File Systems (Pre). | ||
+ | [ OK ] Reached target Remote File Systems. | ||
+ | [ OK ] Finished Create Volatile Files and Directories. | ||
+ | | ||
+ | [ OK ] Finished Update UTMP about System Boot/ | ||
+ | [ OK ] Reached target System Initialization. | ||
+ | [ OK ] Started CUPS Scheduler. | ||
+ | [ OK ] Started Daily apt download activities. | ||
+ | [ OK ] Started Daily apt upgrade and clean activities. | ||
+ | [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. | ||
+ | [ OK ] Started Discard unused blocks once a week. | ||
+ | [ OK ] Started Daily rotation of log files. | ||
+ | [ OK ] Started Daily man-db regeneration. | ||
+ | [ OK ] Started Daily Cleanup of Temporary Directories. | ||
+ | [ OK ] Reached target Paths. | ||
+ | [ OK ] Reached target Timers. | ||
+ | [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. | ||
+ | [ OK ] Listening on CUPS Scheduler. | ||
+ | [ OK ] Listening on D-Bus System Message Bus Socket. | ||
+ | [ OK ] Listening on Erlang Port Mapper Daemon Activation Socket. | ||
+ | [ OK ] Listening on GPS (Global P…ioning System) Daemon Sockets. | ||
+ | [ OK ] Listening on triggerhappy.socket. | ||
+ | [ OK ] Reached target Sockets. | ||
+ | [ OK ] Reached target Basic System. | ||
+ | | ||
+ | | ||
+ | [ OK ] Started Regular background program processing daemon. | ||
+ | [ OK ] Started D-Bus System Message Bus. | ||
+ | | ||
+ | | ||
+ | | ||
+ | | ||
+ | | ||
+ | | ||
+ | | ||
+ | | ||
+ | | ||
+ | | ||
+ | | ||
+ | | ||
+ | | ||
+ | [ OK ] Finished Save/ | ||
+ | [ OK ] Started System Logging Service. | ||
+ | [ OK ] Started triggerhappy global hotkey daemon. | ||
+ | [ OK ] Finished Check for Raspberry Pi EEPROM updates. | ||
+ | [ OK ] Started DHCP Client Daemon. | ||
+ | [ OK ] Finished dphys-swapfile - …mount, and delete a swap file. | ||
+ | [ OK ] Started LSB: rng-tools (Debian variant). | ||
+ | [ OK ] Started Avahi mDNS/DNS-SD Stack. | ||
+ | [ OK ] Started Authorization Manager. | ||
+ | [ OK ] Finished Raise network interfaces. | ||
+ | [ OK ] Started WPA supplicant. | ||
+ | [ OK ] Reached target Sound Card. | ||
+ | | ||
+ | [ OK ] Reached target Network. | ||
+ | [ OK ] Reached target Network is Online. | ||
+ | | ||
+ | [ OK ] Started Erlang Port Mapper Daemon. | ||
+ | | ||
+ | | ||
+ | | ||
+ | | ||
+ | | ||
+ | [ OK ] Started Internet superserver. | ||
+ | [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. | ||
+ | [ OK ] Started User Login Management. | ||
+ | [ OK ] Started Unattended Upgrades Shutdown. | ||
+ | [ OK ] Finished Permit User Sessions. | ||
+ | | ||
+ | [ OK ] Started / | ||
+ | [ OK ] Started HTTP based time synchronization tool. | ||
+ | | ||
+ | [ OK ] Started LSB: Switch to ond…(unless shift key is pressed). | ||
+ | | ||
+ | [ OK ] Started Modem Manager. | ||
+ | [FAILED] Failed to start VNC Server for X11. | ||
+ | |||
+ | Raspbian GNU/Linux 11 analog ttyPS0 | ||
+ | |||
+ | analog login: root (automatic login) | ||
+ | |||
+ | Linux analog 5.10.0-98156-g6b62b86d3dc7 #6086 SMP PREEMPT Thu Apr 14 06:51:49 IST 2022 armv7l | ||
+ | |||
+ | The programs included with the Debian GNU/Linux system are free software; | ||
+ | the exact distribution terms for each program are described in the | ||
+ | individual files in / | ||
+ | |||
+ | Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent | ||
+ | permitted by applicable law. | ||
+ | Last login: Fri May 6 13:55:18 BST 2022 on ttyPS0 | ||
+ | root@analog: | ||
+ | </ | ||
+ | </ | ||
+ | |||
+ | |||
+ | After booting process is complete, you can open IIO-Oscilloscope. Learn more about it [[: | ||
+ | |||
+ | <WRAP important round> | ||
+ | |||
+ | '' | ||
- | {{: | ||
</ | </ | ||