Wiki

Below is the source of this page. To edit this source as well as other pages on the wiki, you must login.

===== AD-FMCADC3-EBZ Quick Start Guides =====

The Quick Start Guides provide a simple step by step instruction on how to do an initial system setup for the AD-FMCADC3-EBZ boards on various FPGA development boards. They will discuss how to program the bitstream, run a no-OS program or boot a Linux distribution.

==== Supported Carriers ====

The AD-FMCADC3-EBZ is, by definition a "FPGA mezzanine card" (FMC), that means it needs a carrier to plug into. The carriers we support are:

^ Board ^ AD-FMCADC3-EBZ ^
| [[xilinx>VC707]] |  v  |  
| [[xilinx>ZC706]] |  v  | 

The supported OS are:

^ Board ^ HDL ^ Linux Software ^ No-OS Software ^ 
| [[xilinx>VC707]] |  v  |  v  |  -  | 
| [[xilinx>ZC706]] |  v  |  v  |  -  | 
 

==== Hardware Setup ====

In most carriers, the AD-FMCADC3-EBZ board connects to the HPC connector (unless otherwise noted). 
The carrier setup requires power, UART (115200), ethernet (Linux), HDMI (if available) and/or JTAG (no-OS) connections. 
A typical setup is shown below.

{{ :resources:eval:user-guides:ad-fmcadc3-ebz:software:linux:ad-fmcadc3-ebz_zc706.png?800 |}}

Analog Devices Wiki

Page Tools