This version is outdated by a newer approved version.
This version (10 Mar 2011 20:20) is a draft.
Approvals: 0/1
This version (10 Mar 2011 20:20) is a draft.Approvals: 0/1
This is an old revision of the document!
Table of Contents
System Demonstration Platform User Guide
The manual consists of:
- Intro (this page)
- Getting Started, Provides software and hardware installation procedure, PC system requirements and basic board information.
- Hardware Description, Provides information on the EVAL-SDP-CB1Z components.
Preface
Thank you for purchasing the EVAL-SDP-CB1Z System Demonstration Platform (SDP) from Analog Devices, Inc. The SDP is used as part of the evaluation system for many ADI components. The SDP board is designed to be used in conjunction with various ADI component evaluation boards as part of a customer evaluation environment. The SDP provides USB connectivity through a USB 2.0 high speed connection to the computer allowing users to evaluate components on this platform from a PC application. The SDP is based on ADSP-BF527 Blackfin processor, with the Blackfin processor peripheral communication lines available to the component daughter board through the two identical 120-pin small footprint connectors
Product Overview
The board features:
- Analog Devices ADSP-BF527 Blackfin processor
- Core performance up to 600 MHz
- 208 -ball CSP-BGA package
- 24 MHz CLKIN oscillator
- 5 Mbits of internal RAM memory
- 32Mb flash memory
- Numonyx M25P32
- SDRAM memory
- Micron MT48LC16M16A2P-6A - 16 Mb x 16 bits (256 Mb/32 MB)
- 2 x 120-pin small foot print connectors
- Hirose FX8-120P-SV1(91),120 Pin Header
- Blackfin processor peripherals exposed
- SPI
- SPORT
- TWI/I2C
- GPIO
- PPI
- Asynchronous Parallel
For more information, go to The ADI web site.
Purpose of This Manual
The SDP User Guide provides instructions for installing the SDP hardware (EVAL-SDP-CB1Z board) and software onto your computer. The necessary installation files are provided with the evaluation daughter board package.
Intended Audience
The primary audience for this manual is a system engineer who seeks to understand how to set up the SDP board and begin USB communications to the computer.
resources/eval/sdp.1299784842.txt.gz · Last modified: 10 Mar 2011 20:20 by Robin Getz