Wiki

Analog Devices Wiki

English
English
简体中文
简体中文
日本語
日本語
Руccкий
Руccкий

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Last revisionBoth sides next revision
resources:eval:hmcad15xx [25 Jan 2023 20:11] – Draft 1/25 Deferson Romeroresources:eval:hmcad15xx [06 Feb 2023 06:29] – Draft 2/6 Deferson Romero
Line 46: Line 46:
  
 ^ Analog Input Channel Number       ^ Default Input Driver, AC/DC coupling      ^Signal type on Input/Output      ^Install  ^Uninstall ^ ^ Analog Input Channel Number       ^ Default Input Driver, AC/DC coupling      ^Signal type on Input/Output      ^Install  ^Uninstall ^
-| 1   | LTC6419, DC coupling, Unity Gain  | Differential/Differential   |R23, R24, R41, R42, R45, R60, R61 |R56, R57 | +| 1   | LTC6419, DC coupling, Unity Gain  | Differential/Differential   |R41, R42, R44, R45, R60, R61 |C51, C52, R23, R24, R56, R57 | 
-| 2   | LTC6419, DC coupling, Unity Gain  | Single-Ended/Differential   |R23, R24, R46, R58, R59| C53, R54, R55 |+| 2   | LTC6419, DC coupling, Unity Gain  | Single-Ended/Differential   |R46, R58, R59| C53, R54, R55, R23, R24 |
  
 ====Analog Input Vcm==== ====Analog Input Vcm====
Line 96: Line 96:
 This section is intended to provide evaluation board characterization results on Differential-to-Differential configuration in Channel 1 using the LTC6419 amplifier as shown in Figure 7, and on Single-to-Differential configuration in Channel 2 using the said amplifier as shown in Figure 8. This section is intended to provide evaluation board characterization results on Differential-to-Differential configuration in Channel 1 using the LTC6419 amplifier as shown in Figure 7, and on Single-to-Differential configuration in Channel 2 using the said amplifier as shown in Figure 8.
  
-<WRAP centeralign>{{ :resources:eval:hmcad_amp_diff_to_diff.png?direct&800 |}}//Figure 7. Amplifier Path for Differential-to-Differential Configuration in CH1//</WRAP> +<WRAP centeralign>{{ :resources:eval:hmcad1511-8bit-quad-250mhz-70mhz-opamp-channel_1-12.61dbm.jpg?600 |}}//Figure 7. Amplifier Path for Differential-to-Differential Configuration in CH1//</WRAP> 
-<WRAP centeralign>{{ :resources:eval:hmcad_amp_single_to_diff.png?direct&800 |}}//Figure 8. Amplifier Path for Single-to-Differential Configuration in CH2//</WRAP>+<WRAP centeralign>{{ :resources:eval:hmcad1520-8bit-quad-250mhz-70mhz-opamp-channel_2-10.53dbm.jpg?600 |}}//Figure 8. Amplifier Path for Single-to-Differential Configuration in CH2//</WRAP>
 =====Troubleshooting Tips===== =====Troubleshooting Tips=====
 If the FFT window remains blank after Running Once in ACE, do the following: If the FFT window remains blank after Running Once in ACE, do the following:
resources/eval/hmcad15xx.txt · Last modified: 09 Feb 2023 07:41 by Deferson Romero

Page Tools