Wiki

Analog Devices Wiki

English
English
简体中文
简体中文
日本語
日本語
Руccкий
Руccкий

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Last revisionBoth sides next revision
resources:eval:hmc8362_and_hmc8364_user_guide [12 Aug 2020 12:32] – [EVALUATION BOARD SOFTWARE] Kieran Barrettresources:eval:hmc8362_and_hmc8364_user_guide [12 Aug 2020 13:04] – Kieran Barrett
Line 1: Line 1:
 +
 ====== EV1HMC8362LP6G/EV1HMC8364LP6G User Guide ====== ====== EV1HMC8362LP6G/EV1HMC8364LP6G User Guide ======
 ====Evaluating the HMC8362/HMC8364 Low Noise Quadband Voltage Controlled Oscillators (VCOs) ==== ====Evaluating the HMC8362/HMC8364 Low Noise Quadband Voltage Controlled Oscillators (VCOs) ====
Line 94: Line 95:
 ====EVALUATION BOARD SOFTWARE==== ====EVALUATION BOARD SOFTWARE====
 ===SOFTWARE=== ===SOFTWARE===
-Currently there is no software available for the EV1HMC8362LP6G and EV1HMC8364LP6G because they can be evaluated without the use of software. However, the EV1HMC8362LP6G and EV1HMC8364LP6G are configured in a manner that allows use of a Linduino [[adi>DC2026C]], Arduino Uno,  or similar microcontroller board, which may be beneficial for users needing to develop and test switching algorithms for their application.  +Currently there is no software available for the EV1HMC8362LP6G and EV1HMC8364LP6G because they can be evaluated without the use of software. However, the EV1HMC8362LP6G and EV1HMC8364LP6G are configured in a manner that allows use of a Linduino [[adi>DC2026C]], Arduino Uno, [[adi>SDP-K1]]  or similar microcontroller board, which may be beneficial for users needing to develop and test switching algorithms for their application.  
-To connect the Arduino Uno microcontroller to the EV1HMC8362LP6G or EV1HMC8364LP6G, flip the Arduino Uno board over so that the digital input/output pins (Pin 8 through Pin 14) line up with Pin 3 to Pin 15 of Connector P3, respectively.+To connect the [[adi>SDP-K1]] interface board to the EV1HMC8362LP6G or EV1HMC8364LP6G, flip the [[adi>SDP-K1]] board over so that the digital input/output pins (Pin 8 through Pin 14) of the [[adi>SDP-K1]] line up with Pin 3 to Pin 15 of Connector P3, respectively as shown in Figure 3.  
 + 
 +{{ :resources:eval:figure_3_sdp-k1_board_mounted_to_ev1hmc8362lp6.png?600 |}} 
 +Figure 3. SDP-K1 Board mounted to EV1HMC8362LP6
  
 ====EVALUATION AND TEST==== ====EVALUATION AND TEST====
resources/eval/hmc8362_and_hmc8364_user_guide.txt · Last modified: 12 Aug 2020 13:18 by Kieran Barrett

Page Tools