Wiki

Below is the source of this page. To edit this source as well as other pages on the wiki, you must login.
{{page>/wiki/common#retired&nofooter&noheader}}

\\
[[resources/eval/ezlinx|ezLINX™ iCoupler® Isolated Interface Development Platform Homepage]]
\\

====== ezLINX Hardware Configuration ======

A list of jumper configurations for setting up the various interfaces on the //ez//LINX development platform is given below:
\\ 

|  Interface  ^  Configuration  ^  Jumpers Fitted  ^  Jumpers Open  ^
^  RS-485 / RS-422  |  Half-Duplex Configuration  |  JP3, JP4, JP40  |  Not applicable  |
^    |  Full-Duplex Configuration  |  Not applicable  |  JP3, JP4, JP40  |
^    |  120Ω termination  |  JP19  |  Not applicable  |
^  RS - 232  |  Loopback Tout1 to Rin1  |  JP2  |  Not applicable  |
^  CAN  |  Split terminate the bus with 120Ω and a common-mode 47nF capacitor  |  JP17, JP18  |  Not applicable  |
^  SPI0  |  Master Mode  |  JP5, JP7, JP9, JP11, JP13, JP15, JP20, JP36  |  JP6, JP8, JP10, JP12, JP14, JP16, JP21, JP37  |
^    |  Slave Mode  |  JP6, JP8, JP10, JP12, JP14, JP16, JP21, JP37  |  JP5, JP7, JP9, JP11, JP13, JP15, JP20, JP36  |
^  SPI2  |  Master Mode  |  JP22, JP24, JP26, JP28, JP30, JP32, JP35, JP38  |  JP23, JP25, JP27, JP29, JP31, JP33, JP34, JP39  |
^    |  Slave Mode  |  JP23, JP25, JP27, JP29, JP31, JP33, JP34, JP39  |  JP22, JP24, JP26, JP28, JP30, JP32, JP35, JP38  |
\\

For more information on each interface and jumper settings chose from the list below:
  * [[resources/eval/ezlinx/isolated-usb|Isolated USB]]
  * [[resources/eval/ezlinx/isolated-can|Isolated CAN]]
  * [[resources/eval/ezlinx/isolated-rs485-rs422|Isolated RS-485/RS-422]]
  * [[resources/eval/ezlinx/isolated-rs232|Isolated RS-232]]
  * [[resources/eval/ezlinx/isolated-i2c|Isolated I2C]]
  * [[resources/eval/ezlinx/isolated-spi|Isolated SPI]]
  * [[resources/eval/ezlinx/isolated-lvds|Isolated LVDS]]
Analog Devices Wiki

Page Tools
