This version is outdated by a newer approved version.
This version (21 Jul 2022 16:35) was approved by David Brown.The Previously approved version (21 Jul 2022 16:33) is available.
This version (21 Jul 2022 16:35) was approved by David Brown.The Previously approved version (21 Jul 2022 16:33) is available.This is an old revision of the document!
Size Estimate & Example Layout
The example layout below provides an effective size estimate for the Rx downconverter and Tx upconverter RF signal chains. The Rx signal chain itself requires roughly 4.3 x 1.2in (110 x 30mm) in area using common RF PCB layout practices, and can likely be optimized to fit in a smaller surface area depending on system size constraints. The Tx signal chain requires roughly 4.3 x 0.9in (110 x 23mm) and likewise leaves room for modification & optimization.
resources/eval/developer-kits/2to24ghz-mxfe-rf-front-end/layout-mockup.1658414138.txt.gz · Last modified: 21 Jul 2022 16:35 by David Brown