Wiki

Analog Devices Wiki

English
English
简体中文
简体中文
日本語
日本語
Руccкий
Руccкий

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
resources:eval:ad9574-user-guide [04 Feb 2021 21:08] – [Quick Start Guide] Petre Minciunescuresources:eval:ad9574-user-guide [05 Feb 2021 22:58] (current) – [Signal Connections] Petre Minciunescu
Line 54: Line 54:
  - Place R212, R219, C221, C222, C226, and C227 with 0Ω resistors.  - Place R212, R219, C221, C222, C226, and C227 with 0Ω resistors.
 \\ \\
 +<note important>Although the AD9574 evaluation board has the footprint for two crystal resonators Y201 and Y203, the AD9574 is not specified to work with crystal resonators and their usage in conjunction with the AD9574 is not recommended</note>
 +
 + 
 === Monitor Clock Input (MCLK_x) === === Monitor Clock Input (MCLK_x) ===
 The AD9574/PCBZ provides a signal path to the MCLK_x inputs using SMA connector J216.  The default BOM configuration allows for a 3.3V single ended CMOS signal to be applied to SMA connector J216 with the monitor clock input set to differential using the PPR6 biasing jumpers. The AD9574/PCBZ provides a signal path to the MCLK_x inputs using SMA connector J216.  The default BOM configuration allows for a 3.3V single ended CMOS signal to be applied to SMA connector J216 with the monitor clock input set to differential using the PPR6 biasing jumpers.
resources/eval/ad9574-user-guide.1612469308.txt.gz · Last modified: 04 Feb 2021 21:08 by Petre Minciunescu

Page Tools