Wiki

Below is the source of this page. To edit this source as well as other pages on the wiki, you must login.

====== EVAL-ADTF3175-NXZ Startup Guide ======

==== Kit Contents ====
  * ADTF3175-NXZ Evaluation Module
    * ADTF3175 Imager Module
    * i.MX8 M Plus SOM (SolidRun)
    * Camera Interface Board
  * 16GB flashed microSD card (Inserted in module sd card slot)
  * USB-C to USB-C cable. Supports PD 2.0, and USB 3.1
  * Tripod

{{ :adtf_eval_whatsinthebox.jpg?nolink&400 |}}


==== Software Download ====
  * GUI Install Guide: [[resources:eval:user-guides:eval-adsd3100-nxz-software-installation|link]]


==== Startup ====
  * Remove camera from packaging
  * Mount camera. Orientation shown in image below

{{ ::img_01812.jpg?nolink&400 |}}

  * Connect USB-C cable to module

{{ ::capture33.png?nolink&400 |}}

  * Connect USB-C to laptop
  * Wait for green light under the USB-C connector on the module light up
  * Run [[:resources:eval:user-guides:eval-adsd3100-nxz-gui|GUI]]

{{ ::img_0186.jpg?nolink&400 |}}

==== Troubleshooting ====
  * Visit [[:resources:eval:user-guides:aditofgui_ts| Troubleshooting Guide]]

Analog Devices Wiki

Page Tools