This version (07 Jul 2022 20:37) was approved by Harshvardhan Bhatia.The Previously approved version (21 Mar 2022 21:56) is available.
Table of Contents
EVAL-ADTF3175-NXZ Startup Guide
Kit Contents
- ADTF3175-NXZ Evaluation Module
- ADTF3175 Imager Module
- i.MX8 M Plus SOM (SolidRun)
- Camera Interface Board
- 16GB flashed microSD card (Inserted in module sd card slot)
- USB-C to USB-C cable. Supports PD 2.0, and USB 3.1
- Tripod
Software Download
- GUI Install Guide: link
Startup
- Remove camera from packaging
- Mount camera. Orientation shown in image below
- Connect USB-C cable to module
- Connect USB-C to laptop
- Wait for green light under the USB-C connector on the module light up
- Run GUI
Troubleshooting
- Visit Troubleshooting Guide
eval-adtf3175-nxz-startup.txt · Last modified: 01 Jul 2022 03:07 by Harshvardhan Bhatia