Wiki

Analog Devices Wiki

English
English
简体中文
简体中文
日本語
日本語
Руccкий
Руccкий

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		Previous revision
university:tools:pluto:users:receiver_sensitivity [10 Mar 2017 22:46] – created Robin Getzuniversity:tools:pluto:users:receiver_sensitivity [25 May 2019 15:49] (current) – [Rx Noise Figure] - add Na Robin Getz
Line 24: Line 24:
  
   * NF = Noise Figure   * NF = Noise Figure
 +  * <m>N_{a}</m> = noise added by the device under test
   * k = Boltzmann’s Constant (1.38 x 10-23 joules/K),    * k = Boltzmann’s Constant (1.38 x 10-23 joules/K), 
   * <m>T_{0}</m> = temperature in Kelvin (in this case 290 K)   * <m>T_{0}</m> = temperature in Kelvin (in this case 290 K)
Line 29: Line 30:
   * G = gain of the device   * G = gain of the device
  
-This is measured using test equiment, as specified in [[http://cp.literature.agilent.com/litweb/pdf/5952-8255E.pdf|Agilent Fundamentals of RF and Microwave Noise Figure Measurements]].+This is measured using test equiment, as specified in [[http://literature.cdn.keysight.com/litweb/pdf/5952-8255E.pdf|Agilent Fundamentals of RF and Microwave Noise Figure Measurements]].
  
university/tools/pluto/users/receiver_sensitivity.txt · Last modified: 25 May 2019 15:49 by Robin Getz

Page Tools