Wiki

Analog Devices Wiki

English
English
简体中文
简体中文
日本語
日本語
Руccкий
Руccкий

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
university:tools:pluto:drivers:osx [07 Sep 2023 16:06] – [Mac OS X Drivers] Michael Hennerichuniversity:tools:pluto:drivers:osx [07 Sep 2023 16:17] (current) – [Ethernet] Remove HoRNDIS Michael Hennerich
Line 37: Line 37:
 ===== Ethernet ===== ===== Ethernet =====
  
-{{page>./windows#ethernet_warning&noeditbtn&nofooter}}+<WRAP tip> 
 +In order to use the ADALM-PLUTO (aka. PlutoSDR) or ADALM2000 (aka. M2k) with Mac OSX the ethernet compatibility mode must be set to **USB CDC-NCM**.
  
-Once the [[http://joshuawise.com/horndis|HoRNDIS]] driver is installed, you should see something like this when you goto -> System Preferences -> Network.+Please see instructions for [[:university:tools:pluto:users:customizing#changing_the_usb_ethernet_compatibility_mode | changing the usb ethernet compatibility mode]]. 
 +</WRAP> 
  
-<WRAP tip>You may need to reboot without the PlutoSDR plugged in, and then attach the PlutoSDR to get HoRNDIS to load properly</WRAP>+{{page>./windows#ethernet_warning&noeditbtn&nofooter}}
  
-{{:university:tools:pluto:drivers:screen_shot_2017-01-12_at_2.36.55_pm.png?400|}}+You should see something like this when you goto -> System Preferences -> Network.
  
-To check things out, it should look something like this in ''dmesg'':+{{:university:tools:pluto:drivers:screen_shot_2017-01-12_at_2.36.55_pm.png?400|}}
  
-<WRAP box> 
-<xterm> 
-adi-mm:build analogdevices$ **sudo dmesg** 
-HoRNDIS: init: HoRNDIS tethering driver for Mac OS X, by Joshua Wise (rel8 final) 
-HoRNDIS: probe: probe: came in with a score of 60000 
-HoRNDIS: message: unknown message type e000401f 
-HoRNDIS: message: unknown message type e0000230 
-HoRNDIS: probe: probe: looks like we're good (2/2/255) 
-USBMSC Identifier (non-unique): 100000235523730700230012090216da47 0x456 0xb673 0x406, 2 
-HoRNDIS: message: kIOMessageServiceIsAttemptingOpen 
-HoRNDIS: openInterfaces: data interface: okay, I got one, and it was a 0x0a/0x00/0x00 
-HoRNDIS: message: kIOMessageServiceIsAttemptingOpen 
-HoRNDIS: rndisInit: their MTU 1486 
-HoRNDIS: setMaxTransferUnit: Excuse me, but I said you could have an MTU of 1486, and you just tried to set an MTU of 1500.  Good try, buddy. 
-HoRNDIS: init: starting up with MTU 1486 
-en4: attached with 4 suspended link-layer multicast membership(s) 
-HoRNDIS: message: kIOMessageServiceIsAttemptingOpen 
-HoRNDIS: message: kIOMessageServiceIsRequestingClose 
-HoRNDIS: message: kIOMessageServiceIsAttemptingOpen 
-HoRNDIS: message: kIOMessageServiceIsRequestingClose 
-en4: failed to restore 4 suspended link-layer multicast membership(s) (err=102) 
-</xterm> 
-</WRAP> 
  
 <WRAP box> <WRAP box>
university/tools/pluto/drivers/osx.txt · Last modified: 07 Sep 2023 16:17 by Michael Hennerich

Page Tools