The most recent version of this page is a draft.DiffThis version (04 Jul 2019 17:52) was approved by rgetz.The Previously approved version (12 Jun 2019 19:31) is available.Diff

This is an old revision of the document!

ADALM-PLUTO for Developers

The people who typical read these pages are those who write custom software or HDL (for the FPGA) that run directly on the Pluto device. This may put the Pluto in different modes, and support different external USB devices (including USB/LAB, or USB/WiFi), extending the capabilities of the device, or completely changing the data that is transferred to the host. Since the goal of the project is to keep things as open as possible, the details on how to compile kernels, create bit files, assemble FIT files and load them into the device, should be found here.

While we do have a few examples, and show how to re-create the default software loads, since this the hardware can be nearly a blank slate for your project, you can do anything you want.


/srv/ · Last modified: 12 Oct 2019 00:40 by rgetz