This version is outdated by a newer approved version.
This version (07 Dec 2016 21:21) is a draft.
Approvals: 0/1
This version (07 Dec 2016 21:21) is a draft.Approvals: 0/1
This is an old revision of the document!
Scopy Oscilloscope
Introduction
The oscilloscope is the third item from the top in the Scopy instrument menu list, displayed to the far left of the Scopy window, as illustrated below.
The small white squares to the right of the instrument names control the run/stop functions of the instruments, allowing the user to run and stop an instrument without having to have that instrument in the current display. Clicking on the oscilloscope name invokes the top level of the Scopy two-channel oscilloscope, which appears as in the following illustration.
Channel 1 is turned on and off by clicking on the orange circle and Channel 2 is turned on and off by clicking on the purple circle. A channel that is on is indicated by a filled-in circle and a channel that is off is indicated by an empty circle. Scope waveform colors correspond to the circle colors.
university/tools/m2k/scopy/oscilloscope.1481142117.txt.gz · Last modified: 07 Dec 2016 21:21 by Jonathan Pearson