Wiki

This version is outdated by a newer approved version.DiffThis version (26 Mar 2015 21:54) was approved by Tim Harder.The Previously approved version (26 Mar 2015 21:28) is available.Diff

This is an old revision of the document!


Building Pixelpulse

Linux

To build from source on Linux with an appropriate C++ compiler and libraries:

  1. Install LibUSB
  2. Install Qt5.4
  3. Run the following commands from a console environment:

git clone --recursive https://github.com/signalspec/pixelpulse2
cd pixelpulse2
mkdir build
cd build
qmake ..
make
./pixelpulse2

Use qmake Version 5, e.g. on Opensuse 13.1 qmake is only version 4

> qmake --version
QMake version 2.01a
Using Qt version 4.8.5 in /usr/lib64
qmake-qt5  --version
QMake version 3.0
Using Qt version 5.1.1 in /usr/lib64
So run in this case
qmake-qt5 ..

university/tools/m1k/pixelpulse/build.1427403293.txt.gz · Last modified: 26 Mar 2015 21:54 by Tim Harder