Wiki

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Last revisionBoth sides next revision
university:tools:m1k:alice:stripchart-users-guide [25 Mar 2016 18:14] – ↷ Page moved and renamed from university:tools:alm1000-stripchart-users-guide to university:tools:m1k:alice:stripchart-users-guide Robin Getzuniversity:tools:m1k:alice:stripchart-users-guide [25 Mar 2016 18:15] – ↷ Links adapted because of a move operation Robin Getz
Line 7: Line 7:
 =====Background:===== =====Background:=====
  
-The ALM1000 contains two 16 bit 100KSPS analog to digital converters. These voltage inputs are often used to measure fast time varying waveforms as in the [[university:tools:alice-1.0-users-guide|ALICE oscilloscope interface]]. However, there are often times when accurate measurement of slowly changing signals over time is required. The following Python interface is provided for that purpose. It provides the means to more accurately calibrate the measurements than provided by the factory calibration contained on the ALM1000 board itself.+The ALM1000 contains two 16 bit 100KSPS analog to digital converters. These voltage inputs are often used to measure fast time varying waveforms as in the [[university:tools:m1k:alice:users-guide|ALICE oscilloscope interface]]. However, there are often times when accurate measurement of slowly changing signals over time is required. The following Python interface is provided for that purpose. It provides the means to more accurately calibrate the measurements than provided by the factory calibration contained on the ALM1000 board itself.
  
 =====Required files:===== =====Required files:=====
university/tools/m1k/alice/stripchart-users-guide.txt · Last modified: 27 Jan 2021 23:01 by Robin Getz