Wiki

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
university:courses:electronics:rl_transient_response [20 Aug 2019 15:07]
andreeapop Links for fritzing and ltspice files
university:courses:electronics:rl_transient_response [23 Aug 2019 11:01] (current)
andreeapop
Line 73: Line 73:
 <WRAP centeralign>​Figure 5. Breadboard connections of RL circuit</​WRAP>​ <WRAP centeralign>​Figure 5. Breadboard connections of RL circuit</​WRAP>​
 =====Procedure:​===== =====Procedure:​=====
- On Channel 1 of the oscilloscope you will visualize the input voltage, and on channel 2 the voltage on the resistor(it has the same shape as the current through the inductor). Generate a square wave on the channel 1 of the signal generator with 4V amplitude . The frequency will be set according to t. Calculate the applied frequency using equation (2) for tp = 5t.+ On Channel 1 of the oscilloscope you will visualize the input voltage, and on channel 2 the voltage on the resistor(it has the same shape as the current through the inductor). Generate a square wave on the channel 1 of the signal generator with 4V amplitude ​peak-to-peak. The frequency will be set according to t. Calculate the applied frequency using equation (2) for tp = 5t.
  
 {{ :​university:​courses:​electronics:​rl_5t.png?​900 |}} {{ :​university:​courses:​electronics:​rl_5t.png?​900 |}}
university/courses/electronics/rl_transient_response.txt · Last modified: 23 Aug 2019 11:01 by andreeapop