Wiki

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
university:courses:electronics:electronics-lab-lco [24 Jul 2017 16:08]
amiclaus change amplitude value to peak-peak
university:courses:electronics:electronics-lab-lco [23 Aug 2019 13:59] (current)
amiclaus
Line 47: Line 47:
 ==== Hardware Setup: ==== ==== Hardware Setup: ====
  
-Configure the waveform generator for a 1 KHz triangle wave with 5V amplitude and 2.5V offset. Both scope channels should be set to 1V/Div.+Configure the waveform generator for a 1 KHz triangle wave with 5V amplitude ​peak-to-peak ​and 2.5V offset. Both scope channels should be set to 1V/Div.
  
 ==== Procedure: ==== ==== Procedure: ====
university/courses/electronics/electronics-lab-lco.txt · Last modified: 23 Aug 2019 13:59 by amiclaus