Differences

This shows you the differences between two versions of the page.

--- university:courses:electronics:electronics-lab-8m [12 Jul 2019 13:24] – [Activity 8M. Stabilized current source (NMOS)] Pop Andreea
+++ university:courses:electronics:electronics-lab-8m [23 Aug 2019 12:54] – Antoniu Miclaus
@@ Line 28: / Line 28: @@
 <WRAP centeralign> Figure 2 Stabilized current source Breadboard Circuit </WRAP>
-The waveform generator should be configured for a 1 KHz triangle wave with 4 volt amplitude and 2V offset. The input of scope channel 2 (2+) is used to measure the stabilized output current at the drain of M<sub>2</sub>.
+The waveform generator should be configured for a 1 KHz triangle wave with 4 volt amplitude peak-to-peak and 2V offset. The input of scope channel 2 (2+) is used to measure the stabilized output current at the drain of M<sub>2</sub>.
 ===== Procedure:=====

Wiki