Differences

This shows you the differences between two versions of the page.

--- university:courses:electronics:electronics-lab-8 [12 Jul 2019 13:24] – [Activity 8. Stabilized current source (BJT)] Pop Andreea
+++ university:courses:electronics:electronics-lab-8 [23 Aug 2019 12:53] – Antoniu Miclaus
@@ Line 28: / Line 28: @@
 <WRAP centeralign> Figure 2 Stabilized current source Breadboard Circuit </WRAP>
-The waveform generator should be configured for a 1 KHz triangle wave with 3 volt amplitude and 1.5V offset. The input of scope channel 2 (2+) is used to measure the stabilized output current at the collector of Q2.
+The waveform generator should be configured for a 1 KHz triangle wave with 3 volt amplitude peak-to-peak and 1.5V offset. The input of scope channel 2 (2+) is used to measure the stabilized output current at the collector of Q2.
 ===== Procedure: =====

Wiki