Differences

This shows you the differences between two versions of the page.

--- university:courses:electronics:electronics-lab-7m [12 Jul 2019 13:23] – [Activity 7M. Zero gain amplifier (MOS)] Pop Andreea
+++ university:courses:electronics:electronics-lab-7m [23 Aug 2019 12:53] – Antoniu Miclaus
@@ Line 28: / Line 28: @@
 <WRAP centeralign> Figure 2 NMOS Zero Gain Amplifier Breadboard Circuit </WRAP>
-The waveform generator 1 should be configured for a 1 KHz triangle wave with 4 volt amplitude and 2V offset. Connect scope Channel 1 to display output W1 of the AWG generator. The Single ended input of scope channel 2 (2+) is used to measure alternately the gate and drain voltage of M<sub>1</sub>.
+The waveform generator 1 should be configured for a 1 KHz triangle wave with 4 volt amplitude peak-to-peak and 2V offset. Connect scope Channel 1 to display output W1 of the AWG generator. The Single ended input of scope channel 2 (2+) is used to measure alternately the gate and drain voltage of M<sub>1</sub>.
 ===== Procedure: =====

Wiki