Differences

This shows you the differences between two versions of the page.

--- university:courses:electronics:electronics-lab-13 [12 Jul 2019 13:40] – Pop Andreea
+++ university:courses:electronics:electronics-lab-13 [23 Aug 2019 13:15] – Antoniu Miclaus
@@ Line 43: / Line 43: @@
 ===== Procedure: =====
-Configure waveform generator for a 1 KHz sine wave with an amplitude of 400 mV and zero offset. Using scope channel 1 to observe the input at W1 and scope channel 2 to observe the output of the amplifier at R<sub>L</sub>, record the input to output amplitude and phase relationship.
+Configure waveform generator for a 1 KHz sine wave with an amplitude of 400 mV peak-to-peak and zero offset. Using scope channel 1 to observe the input at W1 and scope channel 2 to observe the output of the amplifier at R<sub>L</sub>, record the input to output amplitude and phase relationship.
 {{ :university:courses:electronics:a13_wf_amp.png? |}}
@@ Line 98: / Line 98: @@
 ===== Procedure: =====
-Configure AWG1 for a 1 KHz sine wave with an amplitude of 2 V and zero offset. Using scope channel 1 to observe the input at W1 and scope channel 2 to observe the output of the amplifier, record the input to output amplitude and phase relationship.
+Configure AWG1 for a 1 KHz sine wave with an amplitude of 2 V peak-to-peak and zero offset. Using scope channel 1 to observe the input at W1 and scope channel 2 to observe the output of the amplifier, record the input to output amplitude and phase relationship.
 {{ :university:courses:electronics:a13_wf_ug.png? |}}

Wiki