Differences

This shows you the differences between two versions of the page.

--- university:courses:electronics:comms-lab-pulse-osc [05 Mar 2019 12:56]
Antoniu Miclaus [Questions:]
+++ university:courses:electronics:comms-lab-pulse-osc [23 Aug 2019 15:16]
Antoniu Miclaus
@@ Line 43: / Line 43: @@
 =====Hardware Setup:=====
-Setup AWG1 as a square wave with 1.4V amplitude and zero offset. Set the frequency to 50 KHz and the duty cycle to 50% ( square wave high for 50% of the period ). Set both scope inputs to 500 mV/div and the time base to 2 uSec/div. Set the trigger on the falling edge of channel 1.
+Setup AWG1 as a square wave with 1.4V amplitude peak-to-peak and zero offset. Set the frequency to 50 KHz and the duty cycle to 50% ( square wave high for 50% of the period ). Set both scope inputs to 500 mV/div and the time base to 2 uSec/div. Set the trigger on the falling edge of channel 1.
 {{ :university:courses:electronics:apulse_bb.png? |}}

Wiki