You can find the results of your wiki search below. If you didn't find what you were looking for, you can create or edit the page named after your query with the appropriate button, or search the rest of Analog.com. If that doesn't work, try Google.
r all boards)]]
===== Hardware Setup =====
==== FMC Pin Connection Configuration Change ====
<WRAP c... on of the Arria10 SoC Development Kit some of the FMC header pins are connected to a dedicated clock ch... of the Arria10 SoC Development Kit underneath the FMC A connector (J29). The following picture shows th... eval:user-guides:ad-fmcdaq2-ebz:quickstart:a10soc_fmc_rework.jpg |}}
===== Connections =====
* Inse
xilinx>ZCU102]] Rev 1.0 board
* ADRV9009-W/PCBZ FMC board.
* Reference clock source
* Micro-USB ... u102.jpg?900 |}}
* Connect the ADRV9009-W/PCBZ FMC board to the FPGA carrier **HPC1** FMC1 socket.
* On the ADRV9009 FMC card, provide a 30.72MHz clock source, at a +5dBm power level to J401
>ZC706]]
* [[xilinx>ZCU102]]
* [[adi>ADRV2CRR-FMC]]
===== Project layout ======
The project is loc... [[adi>ADRV9009-ZU11EG]] support on [[adi>ADRV2CRR-FMC]] may be enabled by adding ''-DZU11EG'' compiler ... ect your adrv9002 evaluation board to the correct FMC connector or the carrier you use:
* [[:resourc
on-boards-kits/EVAL-ADRV9008-9009.html|ADRV9009]] FMC board
* Ethernet cable
* Micro-USB cable
====... rria:10-gx|A10GX]] board.
-Connect the ADRV9009 FMC board to the FPGA carrier **FMC1** socket(J1).
-Connect the USB JTAG J3 (Micro USB) to your Host PC.