Wiki

Below is the source of this page. To edit this source as well as other pages on the wiki, you must login.
This section presents the steps for developing a software application that will run on the //**Renesas Demo Kit for RX62N**// for controlling and monitoring the operation of the ADI part.

  * Run the //**High-performance Embedded Workshop**// integrated development environment.
  * A window will appear asking to create or open project workspace. Choose “Create a new project workspace” option and press //OK//.
  * From “//Project Types//” option select “//Application//”, name the Workspace and the Project “//ADIEvalBoard//”, select the “//RX//” CPU family and “//Renesas RX Standard//” tool chain. Press //OK//.
{{ :resources:tools-software:uc-drivers:renesas:rx62n_01.png? |}}
  * A few windows will appear asking to configure the project:
    * In the "//Select Target CPU//" window, select “//RX600//” CPU series, “//RX62N//” CPU Type and press //Next//.
    * In the “//Option Setting//” windows keep default settings and press //Next//.
    * In the “//Setting the Content of Files to be generated//” window select "//None//" for the "//Generate main() Function//" option and press //Next//.
    * In the “//Setting the Standard Library//” window press “Disable all” and then //Next//.
    * In the “//Setting the Stack Area//” window check the "//Use User Stack//" option and press //Next//.
    * In the “//Setting the Vector//” window keep default settings and press //Next//.
    * In the “//Setting the Target System for Debugging//” window choose “//RX600 Segger J-Link//” target and press //Next//.
    * In the “//Setting the Debugger Options//” and “//Changing the Files Name to be created//” windows keep default settings, press //Next// and //Finish//.
  * The workspace is created.
{{ :resources:tools-software:uc-drivers:renesas:rx62n_02.png? |}}
  * The RPDL (Renesas Peripheral Driver Library) has to integrated in the project. Unzip the RPDL files (double-click on the file “//RPDL_RX62N.exe//”). Navigate to where the RPDL files were unpacked and double-click on the “//Copy_RPDL_RX62N.bat//” to start the copy process. Choose the LQFP package, type the full path where the project was created and after the files were copied, press any key to close the window.
  * The new source files have to be included in the project. Use the key sequence //Alt, P, A// to open the “//Add files to project ‘ADIEvalBoard’//” window. Double click on the RPDL folder. From the “//Files of type//” drop-down list, select “//C source file (*.C)//”. Select all of the files and press //Add//.
{{ :resources:tools-software:uc-drivers:renesas:rx62n_04.png? |}}
  * To avoid conflicts with standard project files remove the files “//intprg.c//” and “//vecttbl.c//” which are included in the project. Use the key sequence //Alt, P, R// to open the “//Remove Project Files//” window. Select the files, click on Remove and press //OK//. 
{{ :resources:tools-software:uc-drivers:renesas:rx62n_05.png? |}}
  * Next the new directory has to be included in the project. Use the key sequence //Alt, B, R// to open the “//RX Standard Toolchain//” window. Select the C/C++ tab, select “//Show entries for: Include file directories//” and press //Add//. Select “//Relative to: Project directory//”, type “//RPDL//” as sub-directory and press //OK//.
{{ :resources:tools-software:uc-drivers:renesas:rx62n_03.png? |}}
  * The library file path has to be added in the project. Select the Link/Library tab, select “//Show entries for: Library files//” and press //Add//. Select “//Relative to: Project directory//”, type “//RPDL\RX62N_library//” as file path and press //OK//. 
{{ :resources:tools-software:uc-drivers:renesas:rx62n_06.png? |}}
  * Because the “//intprg.c//” file was removed the “//PIntPrg//” specified in option “//start//” has to be removed. Change “//Category//” to “//Section//”. Press "//Edit//”, select “//PIntPRG//” and press “//Remove//”. From this window the address of each section can be also modified. After all the changes are made press //OK// two times.
{{ :resources:tools-software:uc-drivers:renesas:rx62n_07.png? |}}
  * At this point the files extracted from the zip file located in the “//Software Tools//” section have to be added into the project. Copy all the files from the archive into the project folder.
{{ :resources:tools-software:uc-drivers:renesas:rx62n_08.png? |}}
  * Now, the files have to be included in the project. Use the key sequence //Alt, P, A// to open the “//Add files to project ‘ADIEvalBoard’//” window. Navigate into ADI folder. From the “//Files of type//” drop-down list, select “//Project Files//”. Select all the copied files and press //Add//.
{{ :resources:tools-software:uc-drivers:renesas:rx62n_09.png? |}}
  * Now, the project is ready to be built. Press //F7//. The message after the Build Process is finished has to be “//0 Errors, 0 Warnings//”. To run the program on the board, you have to download the firmware into the microprocessor’s memory.
Analog Devices Wiki

Page Tools
