This version is outdated by a newer approved version.
This version (07 Jul 2016 14:22) was approved by Andrei Grozav.
This version (07 Jul 2016 14:22) was approved by Andrei Grozav.This is an old revision of the document!
Table of Contents
Build Xilinx Projects
Windows
create_xilinx_sdk_project.bat
The script can be run with no parameters. In this case, you will be asked to introduce the path and the name of the .hdf file and the path and the name of the folder where the project will be created.
For example:
Enter the system_top.hdf location "example => C:/workspace/my_proj1_hdf/system_top.hdf" system_top.hdf Enter the project build folder "example => C:/my_workspaces Note: use "/" instead of "\"" fmcomms2_zc706
The parameters that were specified in the previous example, can be passed directly if the script is run from a command line.
For example:
create_xilinx_sdk_project.bat D:/workspace/example_hdf/system_top.hdf D:/workspace/example_project/fmcadc2_zc706
A default path of the Xilinx SDK installation folder is specified in the script. If you have installed the package in a different location, please modify the script accordingly
Makefile
Using “Xilinx Software Command Line Tool”, the projects can be created using the Makefiles.
If no parameters are specified, the default location of the .hdf file and of the folder where the project will be created is the current directory.
For example:
Xilinx Software Commandline Tool (XSCT) v2015.2
Build date : Jun 26 2015-17:09:09
Copyright 1986-2015 Xilinx, Inc. All Rights Reserved.
Got $XILINX_SDK: C:/Xilinx/SDK/2015.2
xsct% cd C:/workspace/git/no-os/ad9361
xsct% dir
Volume in drive C is DRIVE_C
Volume Serial Number is CCB3-25B7
Directory of C:\workspace\git\no-os\ad9361
02/16/2016 02:57 PM <DIR> .
02/16/2016 02:57 PM <DIR> ..
10/14/2015 01:55 PM <DIR> chipscope
02/16/2016 01:55 PM 574 create_xilinx_sdk_project.bat
01/05/2016 01:18 PM 768 create_xilinx_sdk_project.sh
01/05/2016 01:18 PM 823 Makefile
01/05/2016 01:18 PM 429 README.md
01/05/2016 01:18 PM <DIR> scripts
02/16/2016 02:54 PM <DIR> sdk_project
01/29/2016 11:59 AM <DIR> sw
02/09/2016 12:15 PM 1,082,772 system_top.hdf
5 File(s) 1,085,366 bytes
6 Dir(s) 132,785,848,320 bytes free
xsct% make -f Makefile
'creating project'
xsct -s ../build_scripts/xilinx/create_sdk_project.tcl system_top.hdf sdk_project
Got $XILINX_SDK: C:/Xilinx/SDK/2015.2
hdf file used: C:/workspace/git/no-OS/ad9361/system_top.hdf
The build directory is: sdk_project
C:/workspace/git/no-OS/ad9361/sdk_project was created
FPGA CPU: ps7_cortexa9_0
Hardware platform project 'hw' created successfully.
BSP project 'bsp' created successfully.
Application project 'sw' created successfully.
./sw/
./sw/platform_xilinx/
Building All Projects...
Building workspace
Building '/bsp'
Invoking Make Builder...bsp
Building '/hw'
Building '/sw'
Invoking scanner config builder on project
Done.
xsct%
The location of the .hdf file and of the folder where the project will be created can be also specified if it is required.
For example:
make -f Makefile hdf file=./system_top.hdf project=./fmcomms2_zc706
Linux
create_xilinx_sdk_project.sh
The script can be run with no parameters. In this case, you will be asked to introduce the path and the name of the .hdf file and the path and the name of the folder where the project will be created.
The parameters that were specified in the previous example, can be passed directly if the script is run from a command line.
For example:
create_xilinx_sdk_project.sh ./system_top.hdf ./fmcomms2_zc706
A default path of the Xilinx SDK installation folder is specified in the script. If you have installed the package in a different location, please modify the script accordingly
Makefile
The projects can be created using the Makefiles.
If no parameters are specified, the default location of the .hdf file and of the folder where the project will be created is the current directory.
The location of the .hdf file and of the folder where the project will be created can be also specified if it is required.
Open the created workspace with Xilinx SDK GUI on Windows and Linux
The workspaces created using the methods described previously, can be also opened using the Xilinx SDK GUI.
Open “Xilinx SDK” and browse for the location of the workspace.
The prebuilt project is included in the opened workspace.
All the scripts described previously are dependent of the README.md file, from which the list and the path of the drivers used by each project is obtained. By moving the files to other locations will cause scripts malfunctions.
resources/tools-software/uc-drivers-all/build-xilinx-projects.1467894162.txt.gz · Last modified: 07 Jul 2016 14:22 by Andrei Grozav