Wiki

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
resources:tools-software:sigmastudiov2:modules:sources:sweepswitch [05 May 2021 14:48] Prasad Kamathresources:tools-software:sigmastudiov2:modules:sources:sweepswitch [01 Apr 2024 13:58] (current) – Formatting corrected John Joseph
Line 27: Line 27:
 ===== Targets Supported ===== ===== Targets Supported =====
 ^Name^ADSP-214xx^ADSP-215xx/ADSP-SC5xx^ADAU145x/1456x^ ^Name^ADSP-214xx^ADSP-215xx/ADSP-SC5xx^ADAU145x/1456x^
-|----------------------------------------|------------------------------------------|--------------------------------------------------|-------------------------------------------| +|LinearSweep and variants| Not Supported |Not SupportedSample
-|LinearSweep and variants| B & SB & SS+|LogSweep and variants| Not SupportedNot SupportedSample|
-|LogSweep and variants| B & SB & SS|+
 \\ \\
 ===== Pins ===== ===== Pins =====
 ==== Output ==== ==== Output ====
 ^Name^Type^Description^ ^Name^Type^Description^
-|---------------|-------------------|-----------------------| 
 |Output0|Audio|Output channel 0| |Output0|Audio|Output channel 0|
 \\ \\
 ===== Configurable Parameters ===== ===== Configurable Parameters =====
 ^GUI Parameter Name^Default Value^Range^Function Description^ ^GUI Parameter Name^Default Value^Range^Function Description^
-| ---------------------------------------- | ---------------------- | ------------------------------ | ---------------------------------------- | 
 |StartFrequency|20|0 to 0.5* sample rate|Sets the initial frequency for sinetone sweep| |StartFrequency|20|0 to 0.5* sample rate|Sets the initial frequency for sinetone sweep|
 |StopFrequency|20000|0 to 0.5* sample rate|Sets the final/end frequency for sinetone sweep| |StopFrequency|20000|0 to 0.5* sample rate|Sets the final/end frequency for sinetone sweep|
Line 47: Line 44:
 \\ \\
 ===== DSP Parameters ===== ===== DSP Parameters =====
-^Parameter Name^Description^ADSP-214xx/SC5xx/215xx^ +^Parameter Name^Description^ADAU145x/146x
-| ----------------------------- | --------------------------------------------------------------------------------------------------- |----------------------------------------------------- | +|start_freq|normalised value of start frequency|FixPoint8d24
-|start_freq|normalised value of start frequency|Float+|stop_freq|normalised value of end frequency|FixPoint8d24
-|stop_freq|normalised value of end frequency|Float+|numcycles_per_step|Gain, the sinetone wave to be multiplied|Integer32
-|numcycles_per_step|Gain, the sinetone wave to be multiplied|Float+|numsteps|number of steps between start and stop|Integer32
-|numsteps|number of steps between start and stop|Float+|freq_increment| frequency increment defined by range and numsteps |FixPoint8d24
-|freq_increment| frequency increment defined by range and numsteps |Float+|ison |Enabled/Disabled the sweep |FixPoint8d24|
-|ison |Enabled/Disabled the sweep |Int|+
 \\ \\
 ===== DSP Parameter Computation ===== ===== DSP Parameter Computation =====
resources/tools-software/sigmastudiov2/modules/sources/sweepswitch.1620218927.txt.gz · Last modified: 05 May 2021 14:48 by Prasad Kamath