no way to compare when less than two revisions

Differences

This shows you the differences between two versions of the page.

@@ Line 1: / Line 1: @@
+[[resources/tools-software/sigmastudiov2/modules/sources|Click here to return to the Sources page]]
+====== DC Input Entry ======
+{{:resources:tools-software:sigmastudiov2:modules:sources:dcinput.png?200|}}
+===== Description =====
+The DC Input Block allows you to generate a DC, direct current, signal(a constant numerical value). This Block can be used to generate control signals for Multiplexers and Lookup Tables.
+The block's controls allow the DC value and the format to be set. There are 32/28 available bits which can be used to represent decimal values depends on the SigmaDSP.
+\\
+===== Targets Supported =====
+^Name^ADSP-214xx(Sample)^ADSP-214xx(Block)^ADSP-215xx/ADSP-SC5xx(Sample)^ADSP-215xx/ADSP-SC5xx(Block)^
+|DC Input Entry| Yes | Yes|Yes| Yes|
+\\
+===== Pins =====
+==== Output ====
+^Name^Type^Description^
+|Output|Control|Output channel 0|
+\\
+===== Configurable Parameters =====
+^GUI Parameter Name^Default Value^Range^Function Description^
+|DCValue|0|0  to 2147483647|This control gives the DC, direct current, signal(a constant numeric value)|
+|IntegerBits|5/8|0 to 32 (Only for SigmaDSP)|This control decides the range of DC control|
+|DecimalBits|23/24|0 to 32(Only for SigmaDSP)|This control decides the range of DC control|
+\\
+===== DSP Parameters =====
+^Parameter Name^Description^ADSP-214xx/SC5xx/215xx^
+|DCValue|DC, direct current, signal(a constant numeric value)|Float|
+\\

Wiki