The most recent version of this page is a draft.DiffThis version (10 Feb 2021 12:41) was approved by Sanjeeva Reddy.

This is an old revision of the document!

Click here to return to the Sources page

Beep Generator


The Beep Generator Block uses an internal oscillator to generate tones.Set the frequency in the text field and click on the Beep button to enable the tone generator. This tone is only active while the beep button is pressed.

Targets Supported

Beep Generator Yes YesYes Yes



OutputControlOutput channel 0

Configurable Parameters

GUI Parameter NameDefault ValueRangeFunction Description
BeepPressedFalseTrue/FalseThis control enables the tone generator
Frequency10000 to 20000frequency of the tone generator

DSP Parameters

Parameter NameDescriptionADSP-214xx/SC5xx/215xx
BeepPressedEnables the tone generatorFloat
CosCosine value of the frequencyFloat
SinSine value of the frequencyFloat

/srv/ · Last modified: 13 May 2021 08:21 by Prasad Kamath