Wiki

Below is the source of this page. To edit this source as well as other pages on the wiki, you must login.
[[resources/tools-software/sigmastudiov2/modules/muxesanddemuxes|Click here to return to the Multiplexers and Demultiplexers page]]

====== Solo======
{{:resources:tools-software:sigmastudiov2:modules:muxesanddemuxes:solo.png}}
\\
===== Description =====
If module is enabled, the selected input signal is passed to the selected output channel and rest are muted. In disable state signals get bypassed. 
\\
===== Usage =====
Select the radio button to route the particular input to output. 
\\
===== Targets Supported =====
^ Name            ^ ADSP-214xx ^ ADSP-215xx/SC5xx ^ ADAU145x/146x ^
| ------------------------------ | -------------------- | -------------------------------- | ---------------------------- |
| Solo | B          | B                | NA              |
\\
===== Pins =====
==== Input ====
^ Name        ^ Type    ^ Description ^
| ------------------------------------ | ------------------------- | --------------------------------- |
|Input<fc #ff0000>X</fc>       | Audio   |Input Channel X |
==== Output ====
^ Name        ^ Type    ^ Description ^
| --------------------------------- | ------------------------- | --------------------------------- |
|Output<fc #ff0000>X</fc> | Audio |Output Channel X |
Note:
     * <fc #ff0000>X</fc> - Channel Index 
\\
===== Configurable Parameters =====
^ GUI Parameter        ^ Default Value ^ Range     ^ Function Description ^
| ---------------------------------------- | ---------------------- | ------------------------------ | ---------------------------------------- |
| NumChannels   | 1              | 1 to 20   | Number of input and output channels. Change in this value requires re-compilation|
| SlewType| NoSlew              | NoSlew/SWSlew   | Enable or disable SWSlew|
| StepSize (SWSlew)          | 10             | 1 to 24   | Step size for transition from one input to other input |

\\
===== DSP Parameters =====
^ Parameter Name       ^ Description ^ ADSP-214xx/SC5xx/215xx ^ ADAU145x/146x ^
| ---------------------------------------- | -------------------------------------------------------------------------------- | ---------------------------------------- | ---------------------------- |
| StepSize | Step size for transition from one input to output | Float | NA|
| IsEnable| Enable or disable the control | Float | NA|
| SelectedIndex | Selected channel index | Float | NA|
===== DSP Parameter Computation =====
Step = 2^(-1/Step)
Analog Devices Wiki

Page Tools
