This version (14 Oct 2021 13:11) was approved by Nikhin Shetty.
Table of Contents
Click here to return to the Multiplexers and Demultiplexers page
Solo
Description
If module is enabled, the selected input signal is passed to the selected output channel and rest are muted. In disable state signals get bypassed.
Usage
Select the radio button to route the particular input to output.
Targets Supported
| Name | ADSP-214xx | ADSP-215xx/SC5xx | ADAU145x/146x |
|---|---|---|---|
| —————————— | ——————-- | ——————————-- | —————————- |
| Solo | B | B | NA |
Pins
Input
| Name | Type | Description |
|---|---|---|
| ———————————— | ————————- | ——————————— |
| InputX | Audio | Input Channel X |
Output
| Name | Type | Description |
|---|---|---|
| ——————————— | ————————- | ——————————— |
| OutputX | Audio | Output Channel X |
Note:
- X - Channel Index
Configurable Parameters
| GUI Parameter | Default Value | Range | Function Description |
|---|---|---|---|
| —————————————- | ———————- | —————————— | —————————————- |
| NumChannels | 1 | 1 to 20 | Number of input and output channels. Change in this value requires re-compilation |
| SlewType | NoSlew | NoSlew/SWSlew | Enable or disable SWSlew |
| StepSize (SWSlew) | 10 | 1 to 24 | Step size for transition from one input to other input |
DSP Parameters
| Parameter Name | Description | ADSP-214xx/SC5xx/215xx | ADAU145x/146x |
|---|---|---|---|
| —————————————- | ——————————————————————————-- | —————————————- | —————————- |
| StepSize | Step size for transition from one input to output | Float | NA |
| IsEnable | Enable or disable the control | Float | NA |
| SelectedIndex | Selected channel index | Float | NA |
DSP Parameter Computation
Step = 2^(-1/Step)
resources/tools-software/sigmastudiov2/modules/muxesanddemuxes/solo.txt · Last modified: 14 Oct 2021 13:11 by Nikhin Shetty