The most recent version of this page is a draft.
This version (10 Feb 2021 12:49) was approved by Sanjeeva Reddy.
This version (10 Feb 2021 12:49) was approved by Sanjeeva Reddy.This is an old revision of the document!
Table of Contents
Click here to return to the Mixers and Splitters page
Multiple Control Splitter
Description
The Multiple Control Splitter allows an input signal to be split into two or more outputs with independent control of each output's gain.
Usage
Turn the knob control to adjust the output gain.
Varaints
Multiple Control Splitter (No Slew)
Multiple Control Splitter (SW Slew)
Targets Supported
| Name | ADSP-214xx(Sample) | ADSP-214xx(Block) | ADSP-215xx/ADSP-SC5xx(Sample) | ADSP-215xx/ADSP-SC5xx(Block) |
|---|---|---|---|---|
| Multiple Control Splitter (No Slew) | Yes | Yes | Yes | Yes |
| Multiple Control Splitter (SW Slew) | Yes | Yes | Yes | Yes |
Pins
Input
| Name | Type | Description |
|---|---|---|
| Input | Audio | Input channel |
Output
| Name | Type | Description |
|---|---|---|
| Output0 | Control | Output channel 0 |
| Output1 | Control | Output channel 0 |
Configurable Parameters
| GUI Parameter Name | Default Value | Range | Function Description |
|---|---|---|---|
| Gain_Channel0 | 0 dB | -200 to 200 dB | Gain factor |
| NumChannels | 2 | 20 | Number of output channels. Change in this value requires re-compilation |
DSP Parameters
| Parameter Name | Description | ADSP-214xx/SC5xx/215xx |
|---|---|---|
| Gain_Channel0 | scaling of the inputs | Float |
/srv/wiki.analog.com/data/pages/resources/tools-software/sigmastudiov2/modules/mixersandsplitters/multiplecontrolsplitter.txt · Last modified: 06 May 2021 07:19 by Nikhin Shetty