Wiki

The most recent version of this page is a draft.DiffThis version (10 Feb 2021 12:50) was approved by Sanjeeva Reddy.

This is an old revision of the document!


Click here to return to the Mixers and Splitters page

Signal Merger


Description

The Merger block mixes a group of input signals and automatically decreases the signal levels in proportion to the number of inputs. This block helps to avoid level clipping without the need to manually adjust mix levels.

Targets Supported

NameADSP-214xx(Sample)ADSP-214xx(Block)ADSP-215xx/ADSP-SC5xx(Sample)ADSP-215xx/ADSP-SC5xx(Block)
Merger Yes YesYes Yes


Pins

Input

NameTypeDescription
Input0AudioInput channel 0
Input1AudioInput channel 1

Output

NameTypeDescription
Output0ControlOutput channel 0


Configurable Parameters

GUI Parameter NameDefault ValueRangeFunction Description
NumChannels220Number of input channels. Change in this value requires re-compilation

DSP Parameters

No DSP Parameters


/srv/wiki.analog.com/data/pages/resources/tools-software/sigmastudiov2/modules/mixersandsplitters/merger.txt · Last modified: 06 May 2021 07:10 by Nikhin Shetty