This version (18 May 2021 09:01) was approved by John Joseph.The Previously approved version (07 May 2021 15:02) is available.
Table of Contents
Click here to return to the IO page
SPDIF Output
Description
The SPDIF Output blocks route signals between the schematic design and the hardware's SPDIF pins.
Usage
Use the output block's drop-down list control to select from the available SPDIF outputs.
Note: These blocks are only available for use with DSPs that have SPDIF I/O.
Targets Supported
| Name | ADSP-214xx | ADSP-215xx/ADSP-SC5xx | ADAU145x/1456x |
|---|---|---|---|
| —————————————- | —————————————— | ————————————————-- | ——————————————- |
| SPDIF Output | Not supported | Not supported | Sample |
Pins
Input
| Name | Type | Description |
|---|---|---|
| —————————- | ——————————— | ———————-- |
| Output | Audio | Interface read output channel |
Configurable Parameters
| GUI Parameter Name | Default Value | Range | Function Description |
|---|---|---|---|
| —————————————- | ———————- | ————————————- | —————————————- |
| SelectedSPDIFOPChannel | 0 | 0 to 2 | Selects the SPDIF out channel |
DSP Parameters
Not applicable
DSP Parameter Computation
Not applicable
resources/tools-software/sigmastudiov2/modules/inputoutput/spdifoutput.txt · Last modified: 12 May 2021 13:44 by Prasad Kamath