This version is outdated by a newer approved version.DiffThis version (06 May 2021 07:54) was approved by Prasad Kamath.The Previously approved version (05 Feb 2020 07:25) is available.Diff

This is an old revision of the document!

Click here to return to the IO page



The Output block routes signals to the hardware's physical outputs. Each block is linked to a single output channel.


Using the drop-down list, select the output channel to associate with a particular block.

Observe that as you drag more output blocks to your schematic, the number of output channels available in the drop-down list decreases because each output can only be associate with a single output block at a time.

The hardware outputs for a particular processor are limited. While designing you can see the number of outputs that are still available from the HWOutputs item of the Resources window.

Targets Supported

Output Block & Sample Block & Sample Sample



input0AudioOutputs the audio to the hardware pin

Configurable Parameters

GUI Parameter NameDefault ValueRangeFunction Description

DSP Parameters

No DSP Parameters

resources/tools-software/sigmastudiov2/modules/inputoutput/output.1620280486.txt.gz · Last modified: 06 May 2021 07:54 by Prasad Kamath