This version (18 May 2021 09:01) was approved by John Joseph.The Previously approved version (06 May 2021 07:54) is available.Diff

Click here to return to the IO page



The Output block routes signals to the hardware's physical outputs. Each block is linked to a single output channel.


Using the drop-down list, select the output channel to associate with a particular block.

Observe that as you drag more output blocks to your schematic, the number of output channels available in the drop-down list decreases because each output can only be associate with a single output block at a time.

The hardware outputs for a particular processor are limited. While designing you can see the number of outputs that are still available from the HWOutputs item of the Resources window.

Targets Supported

Output Block & Sample Block & Sample Sample



input0AudioOutputs the audio to the hardware pin

Configurable Parameters

Not applicable

DSP Parameters

No DSP Parameters

resources/tools-software/sigmastudiov2/modules/inputoutput/output.txt · Last modified: 13 May 2021 09:35 by Prasad Kamath