This version (18 May 2021 09:01) was approved by John Joseph.The Previously approved version (19 Mar 2021 15:26) is available.Diff

Click here to return to the IO page Click here to return to the IO page

Digital Microphone Input


The Digital Microphone Input block receives input from the hardware's microphone input pins and makes it available in the schematic design.


Check the block for the input channel(s) you with to enable. Un-check the box disable an input channel. The pin will turn blue when an input is enabled and grey when disabled. The default block has two pins enabled, for stereo connection.

Targets Supported

NameADSP-214xxADSP-215xx/ADSP-SC5xx ADAU145x/ADAU146x
Digital Microphone Input Block & Sample Block & Sample Sample



Output0AudioMic Output channel 0
Output1AudioMic Output channel 1

Configurable Parameters

Not applicable

DSP Parameters

No DSP Parameters

resources/tools-software/sigmastudiov2/modules/inputoutput/digmicinput.txt · Last modified: 13 May 2021 10:24 by Prasad Kamath