This version is outdated by a newer approved version.
This version (06 May 2021 08:05) was approved by Prasad Kamath.The Previously approved version (19 Mar 2021 14:46) is available.
This version (06 May 2021 08:05) was approved by Prasad Kamath.The Previously approved version (19 Mar 2021 14:46) is available.This is an old revision of the document!
Table of Contents
Click here to return to the IO page
ASRC Output
Description
The ASRC Output block routes signals between the schematic design and the hardwares ASRCs (Asynchronous Sample Rate Converters).
These blocks are only available for use with DSPs that have integrated ASRCs.
Usage
Use the output block's drop-down list control to select from the available ASRCs.
- Every ASRC Output must have its input connected, else there will be errors on compilation.
- Observe that as you drag more ASRC output blocks into the schematic, the number of available outputs in the drop-down decreases because they can only be represented by one block at a time.
Targets Supported
| Name | ADSP-214xx | ADSP-215xx/ADSP-SC5xx | ADAU145x/ADAU146x |
|---|---|---|---|
| —————— | ———————— | ————————————-- | ———————————- |
| ASRC Output | Not available | Not available | Sample |
Pins
Input
| Name | Type | Description |
|---|---|---|
| ——————————-- | ——————————————————- | ——————————————————————- |
| input | Audio | Outputs the audio to the hardware pin |
Configurable Parameters
| GUI Parameter Name | Default Value | Range | Function Description |
|---|---|---|---|
| ——————————-- | ———————- | ——————————-- | —————————————- |
DSP Parameters
No DSP Parameters
resources/tools-software/sigmastudiov2/modules/inputoutput/asrcoutput.1620281101.txt.gz · Last modified: 06 May 2021 08:05 by Prasad Kamath