Wiki

Below is the source of this page. To edit this source as well as other pages on the wiki, you must login.
[[resources/tools-software/sigmastudiov2/modules/inputoutput|Click here to return to the IO page]]
====== ASRC Output ======
\\
{{:resources:tools-software:sigmastudiov2:modules:inputoutput:asrc_op_ssp.jpg?nolink&150|}}
===== Description =====
The ASRC Output block routes signals between the schematic design and the hardwares ASRCs (Asynchronous Sample Rate Converters).

<note>These blocks are only available for use with DSPs that have integrated ASRCs.</note>
\\
===== Usage =====
Use the output block's drop-down list control to select from the available ASRCs.

  * Every ASRC Output must have its input connected, else there will be errors on compilation.
  * Observe that as you drag more ASRC output blocks into the schematic, the number of available outputs in the drop-down decreases because they can only be represented by one block at a time.
\\
===== Targets Supported =====
^Name^ADSP-214xx^ADSP-215xx/ADSP-SC5xx^ADAU145x/ADAU146x^
|-------------------------|------------------------|--------------------------------------------|----------------------------------|
|ASRC Output| Not available | Not available | Sample|
\\
===== Pins =====
==== Input ====
^Name^Type^Description^
|--------------------------------|-------------------------------------------------------|-------------------------------------------------------------------|
|input |Audio|Outputs the audio to the hardware pin|
\\
===== Configurable Parameters =====
^GUI Parameter Name^Default Value^Range^Function Description^
|-------------------------------------------|----------------------|--------------------------------|----------------------------------------|
|SelectedASRCOPChannel|0| 0 to 15| Selected output channel|
\\
===== DSP Parameters =====
\\
Not applicable
\\
Analog Devices Wiki

Page Tools
