This version is outdated by a newer approved version.
This version (10 Feb 2021 12:58) was approved by Sanjeeva Reddy.
This version (10 Feb 2021 12:58) was approved by Sanjeeva Reddy.This is an old revision of the document!
Table of Contents
Click here to return to the Filters page
FIR Filter
Description
The FIR Filter block lets you design any FIR filter desired.Frequency response can be shaped by specifying the appropriate coefficients.
Usage
This block has numeric textbox to edit the tap size for number of coefficients to be used for FIR Filter calcualtion. Click on 'table' button to open the table editor window to enter the calculated coefficients as per desired filter requirement.
Targets Supported
| Name | ADSP-214xx(Sample) | ADSP-214xx(Block) | ADSP-215xx/ADSP-SC5xx(Sample) | ADSP-215xx/ADSP-SC5xx(Block) |
|---|---|---|---|---|
| FirFilter | Yes | Yes | Yes | Yes |
Pins
Input
| Name | Type | Description |
|---|---|---|
| Input0 | Audio | Input Channel 0 |
Output
| Name | Type | Description |
|---|---|---|
| Output0 | Control | Output channel 0 |
Configurable Parameters
| GUI Parameter Name | Default Value | Range | Function Description |
|---|---|---|---|
| NoOfTableValues | 10 | 2 to 10000 | Specifies the number of the coefficients used for FIR filter calculation |
| ByPassEnable | False | True/False | Enabled/Disabled the FIR filter algorithm |
| TableValues | -infinity to + infinity | Coefficients used to calcualte the FIR Filter | |
| NumChannels | 1 | 20 | Number of input and output channels. Change in Channels requires re-compilation |
DSP Parameters
| Parameter Name | Description | ADSP-214xx/SC5xx/215xx |
|---|---|---|
| NoOfTableValues | Specifies the number of the coefficients used for FIR filter calculation | Float |
| ByPassEnable | Enabled/Disabled the FIR filter algorithm | Float |
| TableValues | Coefficients used to calcualte the FIR Filter | Float |
resources/tools-software/sigmastudiov2/modules/filters/firfilter.1580889944.txt.gz · Last modified: 05 Feb 2020 09:05 by Sanjeeva Reddy