Wiki

The most recent version of this page is a draft.DiffThis version (10 Feb 2021 12:57) was approved by Sanjeeva Reddy.

This is an old revision of the document!


Click here to return to the Filters page

IIR Elliptical LowPass Filter



Description

The IIR Elliptical LowPass Filter “Content should be added”

Usage

To module has spin text box to control the order of the filter.

Variants

  • IIR Elliptical LowPass (Mono)
  • IIR Elliptical LowPass (Stereo)


Targets Supported

NameADSP-214xx(Sample)ADSP-214xx(Block)ADSP-215xx/ADSP-SC5xx(Sample)ADSP-215xx/ADSP-SC5xx(Block)
IIR Elliptical LowPass (Mono) No NoNo Yes
IIR Elliptical LowPass (Stereo) No NoNo Yes


Pins

Input

NameTypeDescription
InputAudioInput to the low pass filter(Input0 for stereo)
Input1AudioInput1 to the low pass filter (only for stereo)

Output

NameTypeDescription
OutputAudioFiltered Output (Output0 for stereo)
Output1AudioFiltered Output1 (only for stereo)


Configurable Parameters

GUI Parameter NameDefault ValueRangeFunction Description
Order60 to 10Controls the order of the filter equation


DSP Parameters

Parameter NameDescriptionADSP-214xx/SC5xx/215xx
OrderOrder of the filter equationsFloat
A0Filter coefficient A0Float
A1Filter coefficient A1Float
B0Filter coefficient B0Float
B1Filter coefficient B1Float
B2Filter coefficient B2Float


/srv/wiki.analog.com/data/pages/resources/tools-software/sigmastudiov2/modules/filters/ellipticalinterpolatediirlowpass.txt · Last modified: 13 May 2021 16:47 by Sreesha Y M