This version (13 Sep 2022 11:34) was approved by Angu Sewa.The Previously approved version (04 Feb 2020 10:42) is available.
Table of Contents
Click here to return to the Basic page
Value Hold
Description
The ValueHold block holds the incoming input while the control input is zero and allows the incoming input
route to output while the control input is other than zero.
Targets Supported
| Name | ADSP-214xx | ADSP-215xx/SC5xx | ADAU145x/146x |
|---|---|---|---|
| ———————————————————— | ——————-- | ——————————-- | —————————- |
| ValueHold | B/S | B/S | S |
Pins
Input
| Name | Type | Description | |
|---|---|---|---|
| —————————— | ———————————————————— | —————————— | |
| HoldCondition | Control | Holds or allows the input signal to output | |
| Input X | Audio | Input channel X | |
Output
| Name | Type | Description |
|---|---|---|
| —————————— | ———————————————————— | —————————— |
| HeldValue X | Audio | Output channel X |
Note:
- X - Channel Index
^GUI Parameter Name^Default Value^Range^Function Description^
| ———————————————————— | ——— | ——— | ———————————————————- |
| NumChannels (Only for ADAU145x/146x) | 1 | 20 | Number of input and output channels. Change in this value requires re-compilation |
resources/tools-software/sigmastudiov2/modules/basic/valuehold.txt · Last modified: 13 Sep 2022 11:34 by Angu Sewa