Wiki

This version (13 Sep 2022 09:37) was approved by Ashwin PS.

Click here to return to the Basic page

Standard Hard Clipper


Description

This block clips off portions of signal voltages above and/or below certain limits. In other words, the circuit limits the range of the output signal.

Usage

Click the icon to switch among the clipper options: Hi, Low, or both. Enter upper and lower limits in their text fields. This algorithm can be grown to support multiple input/output pairs for multi-channel audio.

Targets Supported

Name ADSP-214xx ADSP-215xx/SC5xx ADAU145x/146x
———————————————- ——————-- ——————————-- —————————-
Hard Clipper - Standard NA NA S


Pins

Input

NameTypeDescription
———————- ————-- ———————-
InputX AudioInput channel X

Output

NameTypeDescription
———————- ————-- ———————-
OutputX AudioOutput channel X

Note:

  • X - Channel Index


Configurable Parameters

GUI Parameter NameDefault ValueRangeFunction Description
—————————————- ———————- ——————————- —————————————-
ClipType Both High, Low, Both Signal clipping options
Hi 1 LowerLimit to 100 Sets the upper limit
Low -1 -16 to HigherLimit Sets the lower limit
NumChannels 1 1 to 20Number of input and output channels. Change in this value requires re-compilation


DSP Parameters

Parameter Name Description ADSP-214xx/SC5xx/215xx ADAU145x/146x
—————————————- ——————————————————————————-- —————————————- —————————-
up Upper Limit NA FixedPoint8d24
down Lower Limit NA FixedPoint8d24
resources/tools-software/sigmastudiov2/modules/basic/standardcliphard.txt · Last modified: 30 Jul 2022 14:41 by Ashwin PS