This version (13 Sep 2022 07:31) was approved by Arpit Arora.
Table of Contents
Click here to return to the Basic page
Register Read or Write
Description
The Register Read module reads any user accessible register from the DSP and gives out in the output Pin.
The Register Write module writes the value in the input pin to the DSP register address configured.
Configuration
This module supports growth. Address control will be repeated for each channels when grown. And address can be specified either in hexadecimal or decimal.
Variants
- Register Read
- Register Write
Targets Supported
| Name | ADSP-214xx | ADSP-215xx/SC5xx | ADAU145x/146x |
|---|---|---|---|
| —————————— | ——————-- | ——————————-- | —————————- |
| Register Read | NA | NA | S |
| Register Write | NA | NA | S |
Pins
Input
| Name | Type | Description |
|---|---|---|
| ———————- | ————-- | ———————- |
| InputX | Control | Input Channel X (Only for RegisterWrite) |
Output
| Name | Type | Description |
|---|---|---|
| ———————- | ————-- | ———————- |
| OutputX | Control | Output Channel X (Only for RegisterRead) |
Note:
- X - Channel Index
Configurable Parameters
| GUI Parameter | Default Value | Range | Function Description |
|---|---|---|---|
| —————————————- | ———————- | ——————————-- | —————————————- |
| Address X | 0xF000 | 0xF000 - 0xF890 | Register Address to be read/write |
| Address Type X | Hex | Hex / Dec | Address can be specified either in hexadecimal or decimal |
Note:
- X - Channel Index
DSP Parameters
| Parameter Name | Description | ADSP-214xx/SC5xx/215xx | ADAU145x/146x |
|---|---|---|---|
| —————————————- | ———————————————————————————————————- | —————————- | —————— |
| address | Register address | NA | Integer32 |
resources/tools-software/sigmastudiov2/modules/basic/registerreadwrite.txt · Last modified: 19 Aug 2022 08:48 by Arpit Arora