The most recent version of this page is a draft.
This version (10 Feb 2021 13:06) was approved by Sanjeeva Reddy.
This version (10 Feb 2021 13:06) was approved by Sanjeeva Reddy.This is an old revision of the document!
Table of Contents
Click here to return to the Basic page
Feedback
Description
The feedback algorithm generates a delay in the signal path and reroutes signal to an input occurring earlier in the path. Note that this block must be used if feedback is required in your design.
Targets Supported
| Name | ADSP-214xx(Sample) | ADSP-214xx(Block) | ADSP-215xx/ADSP-SC5xx(Sample) | ADSP-215xx/ADSP-SC5xx(Block) |
|---|---|---|---|---|
| Feedback | Yes | Yes | Yes | Yes |
Pins
Input
| Name | Type | Descrption |
|---|---|---|
| Input0 | Audio | Input Channel 0 |
Output
| Name | Type | Descrption |
|---|---|---|
| Output0 | Control | Output channel 0 |
Configurable Parameters
No configurable parameters
DSP Parameters
No DSP Parameters
/srv/wiki.analog.com/data/pages/resources/tools-software/sigmastudiov2/modules/basic/feedback.txt · Last modified: 12 May 2021 18:11 by Nikhin Shetty